586 		DBG_PRINT(ERR_DBG,  in init_shared_mem()
601 			DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "  in init_shared_mem()
702 			DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "  in init_shared_mem()
1058 		DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",  in s2io_print_pci_mode()
1093 	DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",  in s2io_print_pci_mode()
1201 		DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");  in init_nic()
1633 			DBG_PRINT(ERR_DBG,  in init_nic()
1712 				DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",  in init_nic()
2123 		DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");  in verify_xena_quiescence()
2127 		DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");  in verify_xena_quiescence()
2131 		DBG_PRINT(ERR_DBG, "PFC is not ready!\n");  in verify_xena_quiescence()
2135 		DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");  in verify_xena_quiescence()
2139 		DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");  in verify_xena_quiescence()
2143 		DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");  in verify_xena_quiescence()
2147 		DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");  in verify_xena_quiescence()
2151 		DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");  in verify_xena_quiescence()
2163 		DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");  in verify_xena_quiescence()
2168 		DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");  in verify_xena_quiescence()
2272 		DBG_PRINT(ERR_DBG, "%s: device is not ready, "  in start_nic()
2920 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",  in rx_intr_handler()
3051 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",  in tx_intr_handler()
3191 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3193 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3197 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3199 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3203 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3205 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3209 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3246 		DBG_PRINT(ERR_DBG,  in s2io_updt_xpak_counter()
3254 		DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "  in s2io_updt_xpak_counter()
3431 		DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);  in s2io_reset()
3548 			DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "  in s2io_set_swapper()
3581 			DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3642 		DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3665 		DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);  in wait_for_msix_trans()
3688 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in restore_xmsi_data()
3708 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in store_xmsi_data()
3782 		DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");  in s2io_enable_msi_x()
3827 		DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",  in s2io_test_msi()
3845 		DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "  in s2io_test_msi()
3921 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_open()
3927 		DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");  in s2io_open()
4978 			DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5004 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5034 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5104 		DBG_PRINT(ERR_DBG,  in do_s2io_add_mc()
5155 	DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",  in do_s2io_delete_unicast_mc()
5247 		DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");  in do_s2io_prog_unicast()
5704 			DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");  in s2io_vpd_read()
5767 			DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");  in s2io_ethtool_geeprom()
5798 		DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5814 			DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5878 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);  in s2io_register_test()
5886 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);  in s2io_register_test()
5934 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "  in s2io_eeprom_test()
5956 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "  in s2io_eeprom_test()
6203 			DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",  in s2io_ethtool_test()
6638 			DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",  in s2io_change_mtu()
6706 				DBG_PRINT(ERR_DBG,  in s2io_set_link()
6908 		DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);  in s2io_add_isr()
6951 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6963 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6967 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6987 			DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",  in s2io_add_isr()
7060 			DBG_PRINT(ERR_DBG, "Device not Quiescent - "  in do_s2io_card_down()
7094 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_card_up()
7115 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",  in s2io_card_up()
7156 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);  in s2io_card_up()
7212 		DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);  in s2io_restart_nic()
7215 	DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);  in s2io_restart_nic()
7326 			DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",  in rx_osm_handler()
7406 					DBG_PRINT(ERR_DBG,  in rx_osm_handler()
7452 			DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);  in s2io_link()
7460 			DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);  in s2io_link()
7509 		DBG_PRINT(ERR_DBG, "Requested number of tx fifos "  in s2io_verify_parm()
7517 		DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);  in s2io_verify_parm()
7525 			DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7533 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7535 		DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");  in s2io_verify_parm()
7540 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7542 		DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",  in s2io_verify_parm()
7548 		DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "  in s2io_verify_parm()
7556 		DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "  in s2io_verify_parm()
7562 		DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");  in s2io_verify_parm()
7563 		DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");  in s2io_verify_parm()
7569 			DBG_PRINT(ERR_DBG, "Requested rx ring size not "  in s2io_verify_parm()
7664 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
7673 			DBG_PRINT(ERR_DBG,  in s2io_init_nic()
7686 		DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",  in s2io_init_nic()
7824 		DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);  in s2io_init_nic()
7831 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",  in s2io_init_nic()
7839 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",  in s2io_init_nic()
7868 		DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",  in s2io_init_nic()
7878 			DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",  in s2io_init_nic()
7896 			DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8006 		DBG_PRINT(ERR_DBG, "Device registration failed\n");  in s2io_init_nic()
8011 	DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n");  in s2io_init_nic()
8012 	DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,  in s2io_init_nic()
8014 	DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,  in s2io_init_nic()
8016 	DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);  in s2io_init_nic()
8017 	DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);  in s2io_init_nic()
8028 		DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",  in s2io_init_nic()
8032 		DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",  in s2io_init_nic()
8039 		DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);  in s2io_init_nic()
8042 		DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);  in s2io_init_nic()
8046 	DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,  in s2io_init_nic()
8049 	DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,  in s2io_init_nic()
8054 		DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);  in s2io_init_nic()
8057 		DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);  in s2io_init_nic()
8066 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",  in s2io_init_nic()
8069 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",  in s2io_init_nic()
8074 		DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",  in s2io_init_nic()
8078 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8083 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8088 	DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",  in s2io_init_nic()
8138 		DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");  in s2io_rem_nic()
8441 		DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);  in s2io_club_tcp_session()