Lines Matching refs:DBG_PRINT
586 DBG_PRINT(ERR_DBG, in init_shared_mem()
601 DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - " in init_shared_mem()
619 DBG_PRINT(INFO_DBG, "Malloc failed for list_info\n"); in init_shared_mem()
646 DBG_PRINT(INFO_DBG, in init_shared_mem()
657 DBG_PRINT(INIT_DBG, in init_shared_mem()
665 DBG_PRINT(INFO_DBG, in init_shared_mem()
702 DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a " in init_shared_mem()
856 DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n", in init_shared_mem()
922 DBG_PRINT(INIT_DBG, in free_shared_mem()
1058 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n", in s2io_print_pci_mode()
1093 DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n", in s2io_print_pci_mode()
1201 DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n"); in init_nic()
1323 DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n", in init_nic()
1633 DBG_PRINT(ERR_DBG, in init_nic()
1712 DBG_PRINT(ERR_DBG, "%s: RTI init failed\n", in init_nic()
2123 DBG_PRINT(ERR_DBG, "TDMA is not ready!\n"); in verify_xena_quiescence()
2127 DBG_PRINT(ERR_DBG, "RDMA is not ready!\n"); in verify_xena_quiescence()
2131 DBG_PRINT(ERR_DBG, "PFC is not ready!\n"); in verify_xena_quiescence()
2135 DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n"); in verify_xena_quiescence()
2139 DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n"); in verify_xena_quiescence()
2143 DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n"); in verify_xena_quiescence()
2147 DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n"); in verify_xena_quiescence()
2151 DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n"); in verify_xena_quiescence()
2163 DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n"); in verify_xena_quiescence()
2168 DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n"); in verify_xena_quiescence()
2272 DBG_PRINT(ERR_DBG, "%s: device is not ready, " in start_nic()
2391 DBG_PRINT(INTR_DBG, in free_tx_buffers()
2480 DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n", in fill_rx_buffers()
2493 DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n", in fill_rx_buffers()
2516 DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n", in fill_rx_buffers()
2731 DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n", in free_rx_buffers()
2739 DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n", in s2io_chk_rx_buffers()
2864 DBG_PRINT(INFO_DBG, in s2io_netpoll()
2914 DBG_PRINT(INTR_DBG, "%s: Ring Full\n", in rx_intr_handler()
2920 DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n", in rx_intr_handler()
3051 DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n", in tx_intr_handler()
3191 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3193 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3197 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3199 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3203 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3205 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3209 DBG_PRINT(ERR_DBG, in s2io_chk_xpak_counter()
3246 DBG_PRINT(ERR_DBG, in s2io_updt_xpak_counter()
3254 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - " in s2io_updt_xpak_counter()
3408 DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n", in s2io_reset()
3431 DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__); in s2io_reset()
3548 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, " in s2io_set_swapper()
3581 DBG_PRINT(ERR_DBG, in s2io_set_swapper()
3642 DBG_PRINT(ERR_DBG, in s2io_set_swapper()
3665 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i); in wait_for_msix_trans()
3688 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n", in restore_xmsi_data()
3708 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n", in store_xmsi_data()
3734 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", in s2io_enable_msi_x()
3744 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", in s2io_enable_msi_x()
3782 DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n"); in s2io_enable_msi_x()
3827 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n", in s2io_test_msi()
3845 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated " in s2io_test_msi()
3921 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", in s2io_open()
3927 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n"); in s2io_open()
4020 DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name); in s2io_xmit()
4023 DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name); in s2io_xmit()
4029 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n", in s2io_xmit()
4096 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n"); in s2io_xmit()
4168 DBG_PRINT(TX_DBG, in s2io_xmit()
4949 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n", in s2io_set_multicast()
4971 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name); in s2io_set_multicast()
4978 DBG_PRINT(ERR_DBG, in s2io_set_multicast()
5004 DBG_PRINT(ERR_DBG, in s2io_set_multicast()
5034 DBG_PRINT(ERR_DBG, in s2io_set_multicast()
5104 DBG_PRINT(ERR_DBG, in do_s2io_add_mc()
5131 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n"); in do_s2io_add_mac()
5155 DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n", in do_s2io_delete_unicast_mc()
5175 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n"); in do_s2io_read_unicast_mc()
5240 DBG_PRINT(INFO_DBG, in do_s2io_prog_unicast()
5247 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n"); in do_s2io_prog_unicast()
5477 DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds); in s2io_ethtool_gringparam()
5704 DBG_PRINT(ERR_DBG, "Read of VPD data failed\n"); in s2io_vpd_read()
5767 DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n"); in s2io_ethtool_geeprom()
5798 DBG_PRINT(ERR_DBG, in s2io_ethtool_seeprom()
5814 DBG_PRINT(ERR_DBG, in s2io_ethtool_seeprom()
5848 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1); in s2io_register_test()
5854 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2); in s2io_register_test()
5864 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3); in s2io_register_test()
5870 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4); in s2io_register_test()
5878 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1); in s2io_register_test()
5886 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2); in s2io_register_test()
5934 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. " in s2io_eeprom_test()
5956 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. " in s2io_eeprom_test()
6203 DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n", in s2io_ethtool_test()
6638 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", in s2io_change_mtu()
6706 DBG_PRINT(ERR_DBG, in s2io_set_link()
6748 DBG_PRINT(INFO_DBG, "SKB is not NULL\n"); in set_rxd_buffer_pointer()
6758 DBG_PRINT(INFO_DBG, in set_rxd_buffer_pointer()
6787 DBG_PRINT(INFO_DBG, in set_rxd_buffer_pointer()
6908 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name); in s2io_add_isr()
6951 DBG_PRINT(ERR_DBG, in s2io_add_isr()
6963 DBG_PRINT(ERR_DBG, in s2io_add_isr()
6967 DBG_PRINT(ERR_DBG, in s2io_add_isr()
6979 DBG_PRINT(INFO_DBG, in s2io_add_isr()
6987 DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n", in s2io_add_isr()
7060 DBG_PRINT(ERR_DBG, "Device not Quiescent - " in do_s2io_card_down()
7094 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n", in s2io_card_up()
7115 DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n", in s2io_card_up()
7121 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i, in s2io_card_up()
7156 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name); in s2io_card_up()
7212 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name); in s2io_restart_nic()
7215 DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name); in s2io_restart_nic()
7326 DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n", in rx_osm_handler()
7406 DBG_PRINT(ERR_DBG, in rx_osm_handler()
7452 DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name); in s2io_link()
7460 DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name); in s2io_link()
7509 DBG_PRINT(ERR_DBG, "Requested number of tx fifos " in s2io_verify_parm()
7517 DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num); in s2io_verify_parm()
7525 DBG_PRINT(ERR_DBG, in s2io_verify_parm()
7533 DBG_PRINT(ERR_DBG, in s2io_verify_parm()
7535 DBG_PRINT(ERR_DBG, "Disabling transmit steering\n"); in s2io_verify_parm()
7540 DBG_PRINT(ERR_DBG, in s2io_verify_parm()
7542 DBG_PRINT(ERR_DBG, "Default to %d rx rings\n", in s2io_verify_parm()
7548 DBG_PRINT(ERR_DBG, "Wrong intr_type requested. " in s2io_verify_parm()
7556 DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. " in s2io_verify_parm()
7562 DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n"); in s2io_verify_parm()
7563 DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n"); in s2io_verify_parm()
7569 DBG_PRINT(ERR_DBG, "Requested rx ring size not " in s2io_verify_parm()
7664 DBG_PRINT(ERR_DBG, in s2io_init_nic()
7670 DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__); in s2io_init_nic()
7673 DBG_PRINT(ERR_DBG, in s2io_init_nic()
7679 DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__); in s2io_init_nic()
7686 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n", in s2io_init_nic()
7824 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name); in s2io_init_nic()
7831 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n", in s2io_init_nic()
7839 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n", in s2io_init_nic()
7868 DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n", in s2io_init_nic()
7878 DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n", in s2io_init_nic()
7896 DBG_PRINT(ERR_DBG, in s2io_init_nic()
8006 DBG_PRINT(ERR_DBG, "Device registration failed\n"); in s2io_init_nic()
8011 DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n"); in s2io_init_nic()
8012 DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name, in s2io_init_nic()
8014 DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name, in s2io_init_nic()
8016 DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr); in s2io_init_nic()
8017 DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num); in s2io_init_nic()
8028 DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n", in s2io_init_nic()
8032 DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n", in s2io_init_nic()
8039 DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name); in s2io_init_nic()
8042 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); in s2io_init_nic()
8046 DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name, in s2io_init_nic()
8049 DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name, in s2io_init_nic()
8054 DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name); in s2io_init_nic()
8057 DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name); in s2io_init_nic()
8066 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n", in s2io_init_nic()
8069 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n", in s2io_init_nic()
8074 DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n", in s2io_init_nic()
8078 DBG_PRINT(ERR_DBG, in s2io_init_nic()
8083 DBG_PRINT(ERR_DBG, in s2io_init_nic()
8088 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n", in s2io_init_nic()
8138 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n"); in s2io_rem_nic()
8167 DBG_PRINT(INIT_DBG, in check_L2_lro_capable()
8199 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in check_for_socket_match()
8217 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in initiate_new_session()
8247 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in update_L3L4_header()
8273 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in aggregate_new_rx()
8297 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__); in verify_l3_l4_lro_capable()
8365 DBG_PRINT(INFO_DBG, "IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr); in s2io_club_tcp_session()
8379 DBG_PRINT(INFO_DBG, "%s: Out of sequence. " in s2io_club_tcp_session()
8419 DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n", in s2io_club_tcp_session()
8441 DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__); in s2io_club_tcp_session()