Lines Matching full:credit
56 * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning -
227 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
228 the initial credit value; read returns the current value of the credit
243 /* [RW 6] QM output initial credit. Max credit available - 32. Write writes
244 the initial credit value; read returns the current value of the credit
271 /* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
272 writes the initial credit value; read returns the current value of the
273 credit counter. Must be initialized to 64 at start-up. */
275 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
276 writes the initial credit value; read returns the current value of the
277 credit counter. Must be initialized to 64 at start-up. */
384 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
386 messages. Max credit available - 127. Write writes the initial credit
387 value; read returns the current value of the credit counter. Must be
786 /* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
787 initial value to the credit counter; related to the address. Read returns
843 /* [R 4] Current value of response A counter credit. Initial credit is
847 /* [R 4] Current value of response B counter credit. Initial credit is
851 /* [RW 4] The initial credit at the Doorbell Response Interface. The write
852 writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
2113 /* [RW 8] init credit counter for port0 in LLH */
2136 /* [RW 8] init credit counter for port1 in LLH */
2284 /* [RW 15] Specify which of the credit registers the client is to be mapped
2286 * clients that are not subject to WFQ credit blocking - their
2289 /* [RW 32] Specify which of the credit registers the client is to be mapped
2292 * subject to WFQ credit blocking - their specifications here are not used.
2295 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
2296 * use credit registers 0-5 respectively (0x543210876). Note that credit
2299 /* [RW 4] Specify which of the credit registers the client is to be mapped
2302 * subject to WFQ credit blocking - their specifications here are not used.
2305 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
2306 * use credit registers 0-5 respectively (0x543210876). Note that credit
2314 /* [RW 5] Specify whether the client is subject to WFQ credit blocking. The
2316 * tx_arb_priority_client). Default value is 0 for not using WFQ credit
2319 /* [RW 32] Specify the upper bound that credit register 0 is allowed to
2330 /* [RW 32] Specify the weight (in bytes) to be added to credit register 0
2542 /* [RW 32] Specify which of the credit registers the client is to be mapped
2545 * subject to WFQ credit blocking - their specifications here are not used.
2548 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
2549 * use credit registers 0-5 respectively (0x543210876). Note that credit
2552 * credit registers 0-5 are valid. This register should be configured
2555 /* [RW 4] Specify which of the credit registers the client is to be mapped
2558 * subject to WFQ credit blocking - their specifications here are not used.
2561 * debug to use credit registers 6, 7, and 8, respectively, and COSes 0-5 to
2562 * use credit registers 0-5 respectively (0x543210876). Note that credit
2565 * credit registers 0-5 are valid. This register should be configured
2575 /* [RW 9] Specify whether the client is subject to WFQ credit blocking. The
2580 * 0 for not using WFQ credit blocking. */
2588 /* [RW 32] Specify the weight (in bytes) to be added to credit register 0
2636 /* [RW 32] Specify the upper bound that credit register 0 is allowed to
2755 /* [R 11] Current credit for the LB queue in the tx port buffers in 16 byte
2758 /* [R 11] Current credit for queue 0 in the tx port buffers in 16 byte
2761 /* [R 11] Current credit for queue 1 in the tx port buffers in 16 byte
2776 * corresponding bit is 1); indicates to which of the credit registers this
2777 * client is mapped. For clients which are not credit blocked; their mapping
2781 * corresponding bit is 1); indicates to which of the credit registers this
2782 * client is mapped. For clients which are not credit blocked; their mapping
2796 * WFQ credit blocking (corresponding bit = 1). */
2799 * WFQ credit blocking (corresponding bit = 1). */
2834 /* [RW 1] Init bit. When set the initial credits are copied to the credit
2838 /* [RW 11] Initial credit for the LB queue in the tx port buffers in 16 byte
2841 /* [RW 11] Initial credit for queue 0 in the tx port buffers in 16 byte
2844 /* [RW 11] Initial credit for queue 1 in the tx port buffers in 16 byte
2847 /* [RW 1] Init bit for port 0. When set the initial credit of port 0 is
2848 copied to the credit register. Should be set and then reset after the
2851 /* [RW 1] Init bit for port 1. When set the initial credit of port 1 is
2852 copied to the credit register. Should be set and then reset after the
2855 /* [RW 1] Init bit for port 4. When set the initial credit of port 4 is
2856 copied to the credit register. Should be set and then reset after the
2883 /* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */
2885 /* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte
2900 /* [R 11] Removed for E3 B0 - Current credit for port 1 in the tx port
2903 /* [R 11] Removed for E3 B0 - Initial credit for port 0 in the tx port
2916 /* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */
2918 /* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte
3247 /* [R 8] debug only: CFC load request current credit. Transaction based. */
3249 /* [R 8] debug only: CFC search request current credit. Transaction based. */
3251 /* [RW 6] The initial credit for the search message to the CFC interface.
3252 Credit is transaction based. */
3375 /* [R 4] debug only: SRC current credit. Transaction based. */
3382 /* [R 8] debug only: TCM current credit. Cycle based. */
3384 /* [R 8] debug only: TSDM current credit. Transaction based. */
3971 /* [RW 16] The byte credit cost for each task. This value is for both ports */
3973 /* [RW 16] The initial byte credit value for both ports. */
3987 /* [RW 16] The byte credit value that if above the QM is considered almost
3990 /* [RW 4] The initial credit for interface */
4027 physical queue uses the byte credit; queues 31-0 */
4030 physical queue uses the byte credit; queues 95-64 */
4033 physical queue uses the byte credit; queues 63-32 */
4036 physical queue uses the byte credit; queues 127-96 */
4088 /* [R 16] The byte credit of port 1 */
4247 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
4257 /* [RC 32] Credit update error register */
4259 /* [R 16] The credit value for each VOQ */
4263 /* [RW 16] The credit value that if above the QM is considered almost full */
4265 /* [RW 16] The init and maximum credit for each VoQ */
4452 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
4453 the initial credit value; read returns the current value of the credit
4477 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
4478 writes the initial credit value; read returns the current value of the
4479 credit counter. Must be initialized to 64 at start-up. */
4481 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
4482 writes the initial credit value; read returns the current value of the
4483 credit counter. Must be initialized to 64 at start-up. */
4595 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4596 the initial credit value; read returns the current value of the credit
4644 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
4646 messages. Max credit available - 127.Write writes the initial credit
4647 value; read returns the current value of the credit counter. Must be
4662 /* [RW 4] Load value for cfc ac credit cnt. */
4664 /* [RW 4] Load value for cfc cld credit cnt. */
4691 /* [RW 4] Load value for expiration credit cnt. CFC max number of
4716 /* [RW 2] Load value for pci arbiter credit cnt. */
4972 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
4973 the initial credit value; read returns the current value of the credit
5008 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
5009 writes the initial credit value; read returns the current value of the
5010 credit counter. Must be initialized to 64 at start-up. */
5012 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
5013 writes the initial credit value; read returns the current value of the
5014 credit counter. Must be initialized to 64 at start-up. */
5063 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
5064 writes the initial credit value; read returns the current value of the
5065 credit counter. Must be initialized to 4 at start-up. */
5125 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
5126 the initial credit value; read returns the current value of the credit
5174 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
5176 messages. Write writes the initial credit value; read returns the current
5177 value of the credit counter. Must be initialized to 12 at start-up. */
5471 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
5472 the initial credit value; read returns the current value of the credit
5507 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
5508 writes the initial credit value; read returns the current value of the
5509 credit counter. Must be initialized to 64 at start-up. */
5511 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
5512 writes the initial credit value; read returns the current value of the
5513 credit counter. Must be initialized to 64 at start-up. */
5587 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
5588 writes the initial credit value; read returns the current value of the
5589 credit counter. Must be initialized to 4 at start-up. */
5677 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
5678 the initial credit value; read returns the current value of the credit
5715 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
5717 messages. Max credit available - 3.Write writes the initial credit value;
5718 read returns the current value of the credit counter. Must be initialized