217 		BNX2X_ERR("BAD nbd!\n");  in bnx2x_free_tx_pkt()
444 		BNX2X_ERR("start of bin not in stop [%d]\n", queue);  in bnx2x_tpa_start()
566 		BNX2X_ERR("Can't map sge\n");  in bnx2x_alloc_rx_sge()
614 		BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n",  in bnx2x_fill_frag_skb()
616 		BNX2X_ERR("cqe->pkt_len = %d\n", cqe->pkt_len);  in bnx2x_fill_frag_skb()
788 			BNX2X_ERR("skb_put is about to fail...  pad %d  len %d  rx_buf_size %d\n",  in bnx2x_tpa_stop()
844 		BNX2X_ERR("Can't map rx data\n");  in bnx2x_alloc_rx_data()
968 				BNX2X_ERR("START/STOP packet while TPA disabled, type %x\n",  in bnx2x_rx_int()
1422 					BNX2X_ERR("Failed to allocate TPA skb pool for queue[%d] - disabling TPA on this queue!\n",  in bnx2x_init_rx_rings()
1444 					BNX2X_ERR("was only able to allocate %d rx sges\n",  in bnx2x_init_rx_rings()
1446 					BNX2X_ERR("disabling TPA for queue[%d]\n",  in bnx2x_init_rx_rings()
1755 			BNX2X_ERR("request sp irq failed\n");  in bnx2x_req_msix_irqs()
1771 			BNX2X_ERR("request fp #%d irq (%d) failed  rc %d\n", i,  in bnx2x_req_msix_irqs()
1841 			BNX2X_ERR("IRQ request failed  rc %d, aborting\n", rc);  in bnx2x_setup_irqs()
1996 		BNX2X_ERR("Failed to set real number of Tx queues: %d\n", rc);  in bnx2x_set_real_num_queues()
2001 		BNX2X_ERR("Failed to set real number of Rx queues: %d\n", rc);  in bnx2x_set_real_num_queues()
2164 		BNX2X_ERR("Failed to clean ETH MACs: %d\n", rc);  in bnx2x_squeeze_objects()
2172 		BNX2X_ERR("Failed to clean UC list MACs: %d\n", rc);  in bnx2x_squeeze_objects()
2185 		BNX2X_ERR("Failed to add a new DEL command to a multi-cast object: %d\n",  in bnx2x_squeeze_objects()
2192 			BNX2X_ERR("Failed to clean multi-cast object: %d\n",  in bnx2x_squeeze_objects()
2312 	BNX2X_ERR("Can't allocate FW stats memory\n");  in bnx2x_alloc_fw_stats_mem()
2343 		BNX2X_ERR("MCP response failure, aborting\n");  in bnx2x_nic_load_request()
2351 		BNX2X_ERR("MCP refused load request, aborting\n");  in bnx2x_nic_load_request()
2381 				BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. Aborting\n",  in bnx2x_compare_fw_ver()
2533 			BNX2X_ERR("Unable to allocate bp memory for cnic\n");  in bnx2x_load_cnic()
2540 		BNX2X_ERR("Unable to allocate memory for cnic fps\n");  in bnx2x_load_cnic()
2547 		BNX2X_ERR("Unable to set real_num_queues including cnic\n");  in bnx2x_load_cnic()
2570 				BNX2X_ERR("Queue setup failed\n");  in bnx2x_load_cnic()
2600 		BNX2X_ERR("Unable to set real_num_queues not including cnic\n");  in bnx2x_load_cnic()
2602 	BNX2X_ERR("CNIC-related load failed\n");  in bnx2x_load_cnic()
2621 		BNX2X_ERR("Can't load NIC when there is panic\n");  in bnx2x_nic_load()
2657 			BNX2X_ERR("Unable to allocate bp memory\n");  in bnx2x_nic_load()
2667 		BNX2X_ERR("Unable to allocate memory for fps\n");  in bnx2x_nic_load()
2688 		BNX2X_ERR("Unable to set real_num_queues\n");  in bnx2x_nic_load()
2733 			BNX2X_ERR("HW init failed, aborting\n");  in bnx2x_nic_load()
2744 		BNX2X_ERR("setup irqs failed\n");  in bnx2x_nic_load()
2764 			BNX2X_ERR("Function start failed!\n");  in bnx2x_nic_load()
2775 				BNX2X_ERR("MCP response failure, aborting\n");  in bnx2x_nic_load()
2788 		BNX2X_ERR("Setup leading failed!\n");  in bnx2x_nic_load()
2799 			BNX2X_ERR("Queue %d setup failed\n", i);  in bnx2x_nic_load()
2807 		BNX2X_ERR("PF RSS init failed\n");  in bnx2x_nic_load()
2821 		BNX2X_ERR("Setting Ethernet MAC failed\n");  in bnx2x_nic_load()
2901 		BNX2X_ERR("Timeout waiting for SP elements to complete\n");  in bnx2x_nic_load()
3011 		BNX2X_ERR("Can't unload in closed or error state\n");  in bnx2x_nic_unload()
3794 		BNX2X_ERR("BUG! Tx ring full when queue awake!\n");  in bnx2x_start_xmit()
3867 			BNX2X_ERR("Tx timestamping was not enabled, this packet will not be timestamped\n");  in bnx2x_start_xmit()
4256 		BNX2X_ERR("support for too many traffic classes requested: %d. Max supported is %d\n",  in bnx2x_setup_tc()
4263 		BNX2X_ERR("failed to declare %d traffic classes\n", num_tc);  in bnx2x_setup_tc()
4323 		BNX2X_ERR("Requested MAC address is not valid\n");  in bnx2x_change_mac_addr()
4328 		BNX2X_ERR("Can't change address on STORAGE ONLY function\n");  in bnx2x_change_mac_addr()
4470 		BNX2X_ERR("was only able to allocate %d rx skbs on queue[%d]\n",  in bnx2x_alloc_rx_bds()
4629 	BNX2X_ERR("Unable to allocate full memory for queue %d (size %d)\n",  in bnx2x_alloc_fp_mem_at()
4691 		BNX2X_ERR("Adjusted num of queues from %d to %d\n",  in bnx2x_alloc_fp_mem()
4863 		BNX2X_ERR("Wrong WWN type requested - %d\n", type);  in bnx2x_fcoe_get_wwn()
4882 		BNX2X_ERR("Can't perform change MTU during parity recovery\n");  in bnx2x_change_mtu()
5035 		BNX2X_ERR("Handling parity error recovery. Try again later\n");  in bnx2x_resume()
5061 		BNX2X_ERR("bad context pointer %p\n", cxt);  in bnx2x_set_ctx_validation()