Lines Matching full:this
19 This is the core driver for CS5535/CS5536 MFD functions. This is
29 using the SPI interface. This driver provides common support for
38 Select this to get System Manager support for all Altera branded
49 Support for the ACT8945A PMIC from Active-semi. This device
62 Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC.
63 This driver will only map the hardware interrupt and registers, you
64 have to select individual drivers based on this MFD to be able to use
65 the ADC or the thermal sensor. This will try to probe the ADC driver
68 To compile this driver as a module, choose M here: the module will be
97 Multifunction Power Management IC. This includes
109 This driver provides common support for accessing the device,
118 Select this to get support for AT91 USART IP. This is a wrapper
121 function of this MFD driver according to a device tree property.
128 Select this to get support for Atmel Flexcom. This is a wrapper
131 by the probe function of this MFD driver according to a device tree
141 This driver provides common support for accessing the device,
168 This driver can also be built as a module. If so, the module
178 This driver include only the core APIs. You have to select individual
194 This driver include only the core APIs. You have to select individual
198 Note on x86 this provides an ACPI OpRegion, so this must be 'y'
210 This driver include only the core APIs. You have to select individual
220 Select this to get support for ChromeOS Embedded Controller
221 sub-devices. This driver will instantiate additional drivers such
224 To compile this driver as a module, choose M here: the module will be
297 This driver supports the ASIC3 multifunction chip found on many
306 usually found on PXA processors-based platforms. This includes
323 when controlled using SPI. This driver provides common support
335 when controlled using I2C. This driver provides common support
346 Say yes here for support of Dialog Semiconductor DA9055. This is
347 a Power Management IC. This driver provides common support for
352 This driver can be built as a module. If built as a module it will be
364 This includes the I2C driver and core APIs.
376 This includes the I2C driver and core APIs.
387 This adds support for the DA9150 integrated charger and fuel-gauge
388 chip. This driver provides common support for accessing the device.
397 This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
408 This adds support for the power-off functionality and access to
419 Select this option to enable support for Samsung Exynos Low Power
433 This driver provides common support for accessing the device.
444 This driver provides common support for accessing the device,
454 Select this if your MC13xxx is connected via an SPI bus.
462 Select this if your MC13xxx is connected via an I2C bus.
469 Select this option to enable support for Monolithic Power Systems
470 battery charger. This provides ADC, thermal and battery charger power
481 processors. This driver provides common support for accessing the
487 This driver can also be built as a module. If so, the module will be
507 This driver includes core APIs _only_. You have to select
520 Select this option to enable Hisilicon hi655x series pmic driver.
526 This core driver provides register access for the LED/DS1WM
537 This device provides input and output GPIOs through an I2C
547 This MFD provides support for I2C and GPIO that exist only
558 many functional units. This driver provides needed support for
579 Select this option to enable support for Crystal Cove PMIC
584 This option is a bool as it provides an ACPI OpRegion which must be
585 available before any devices using it are probed. This option also
594 Select this option to enable support for Whiskey Cove PMIC
608 Select this option to enable support for the Intel Cherry Trail
611 This option is a bool as it provides an ACPI OpRegion which must be
612 available before any devices using it are probed. This option also
625 Select this option for supporting Dollar Cove (TI version) PMIC
636 Select this option for supporting Basin Cove PMIC device
649 This driver supports Intel Low Power Subsystem (LPSS) devices such as
658 This driver supports Intel Low Power Subsystem (LPSS) devices such as
667 Select this option to enable access to Intel MSIC (Avatele
668 Passage) chip. This chip embeds audio, battery, GPIO, etc.
679 This driver provides support for the PMC (Power Management
682 Register and P-unit access. In addition this creates devices
690 Select this to get support for the Microcontroller found in
691 the Compaq iPAQ handheld computers. This is an Atmel
693 firmware using the custom protocol implemented in this driver.
705 To compile this driver as a module, choose M here: the module will
713 This is the core driver for the Janz CMOD-IO PCI MODULbus
714 carrier board. This device is a PCI to MODULbus bridge which may
722 This is the core driver for the PLD (Programmable Logic Device) found
751 This driver can also be built as a module. If so, the module
761 This supports for Marvell 88PM800 Power Management IC.
762 This includes the I2C driver and the core APIs _only_, you have to
773 This supports for Marvell 88PM805 Power Management IC. This includes
784 This supports for Marvell 88PM8606/88PM8607 Power Management IC.
785 This includes the I2C driver and the core APIs _only_, you have to
799 This driver provides common support for accessing the device;
814 RTC, regulators, clock generator, watchdog etc. This driver
827 MAX77651 Power Management ICs. This is the core multifunction
844 This driver provides common support for accessing the device;
856 This is a companion Power Management IC with Flash, Haptic, Charger,
858 This driver provides common support for accessing the device;
870 This is companion Power Management IC with LEDs, Haptic, Charger,
872 This driver provides common support for accessing the device;
883 Say yes here to add support for Maxim Semiconductor MAX8907. This is
884 a Power Management IC. This driver provides common support for
893 Say yes here to add support for Maxim Semiconductor MAX8925. This is
894 a Power Management IC. This driver provides common support for
905 This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
907 This driver provides common support for accessing the device;
918 National Semiconductor LP3974. This is a Power Management IC.
919 This driver provides common support for accessing the device,
940 Say yes here to add support for MediaTek MT6397 PMIC. This is
941 a Power Management IC. This driver provides common support for
953 This driver provides common support for accessing the devices;
957 This driver can also be built as a module. If so the module
964 This enables the PCAP ASIC present on EZX Phones. This is
1008 This core driver provides register access and IRQ handling
1031 This enables support for the Philips UCB1400 core functions.
1034 To compile this driver as a module, choose M here: the
1044 If you say yes to this option, support will be included for the
1047 This is required if your board has a PM8xxx and uses its features,
1051 module. This will build a module called "pm8xxx-core".
1057 If you say yes to this option, support will be included for the
1061 This is required to access many regulators, clocks and bus
1065 module. This will build a module called "qcom_rpm".
1074 This enables support for the Qualcomm SPMI PMICs.
1076 SoCs. Note, that this will only be useful paired with descriptions
1098 This driver provides for the Richtek RT5033 Power Management IC,
1099 which includes the I2C driver and the Core APIs. This driver provides
1110 Select this option to get support for the RICOH583 Power
1112 This driver provides common support for accessing the device
1127 This driver provides common support for accessing the device
1141 This driver provides common support for accessing the device,
1154 This driver provides common support for accessing the device,
1158 To compile this driver as a module, choose M here: the
1161 on this driver so building this as a module might require proper
1170 This is the core driver for the SI476x series of AM/FM
1171 radio. This MFD driver connects the radio-si476x V4L2 module
1174 To compile this driver as a module, choose M here: the
1182 This driver creates a single register map with the intention for it
1204 This is the core driver for the Silicon Motion SM501 multimedia
1205 companion chip. This device is a multifunction device which may
1215 This option uses the gpio library layer to export the 64 GPIO
1225 This is the core driver for the Skyworks SKY81452 backlight and
1228 This driver can also be built as a module. If so, the module
1239 This enables support for the Spreadtrum SC27xx PMICs with SPI
1244 This driver provides common support for accessing the SC27xx PMICs,
1252 chips. This core driver expose register access functions.
1263 Select this to enable the AB3100 Mixed Signal IC core
1264 functionality. This connects to a AB3100 on the I2C bus
1267 this multi-functional IC. This is needed to use other features
1277 Select this to enable the AB3100 Mixed Signal IC OTP (one-time
1278 programmable memory) support. This exposes a sysfs file to read
1288 Select this option to enable access to AB8500 power management
1289 chip. This connects to U8500 either on the SSP/SPI bus (deprecated
1292 This chip embeds various other multimedia functionalities as well.
1299 Select this option if you want debug information using the debug
1307 Select this option to enable support for the DB8500 Power Reset
1308 and Control Management Unit. This is basically an autonomous
1329 This driver provides common support for accessing the device,
1346 This is used to enable I2C interface of STMPE
1352 This is used to enable SPI interface of STMPE
1373 Select this option to enable accessing system control registers
1389 To compile this driver as a module, choose M here: the
1396 This driver supports the MSP430 microcontroller used on these
1407 This driver consists of GPIO and PWM drivers.
1437 This is the core driver for the OAMP EHCI and OHCI drivers.
1438 This MFD driver does the required setup functionalities for
1459 This option enables a driver for the TP61050/TPS61052
1460 high-power "white LED driver". This boost converter is
1474 This driver can also be built as a module. If so, the module
1486 This driver can also be built as a module. If so, the module
1499 This driver provides common support for accessing the device,
1515 This driver provides common support for accessing the device,
1532 This driver can also be built as a module. If so, the module
1548 This option is a bool as it provides an ACPI operation
1550 using this are probed. This option also configures the
1564 This driver can also be built as a module. If so, the module
1578 This driver can also be built as a module. If so, the module
1593 This driver can also be built as a module. If so, the module
1604 This driver provides common support for accessing the device,
1608 This driver can also be built as a module. If so, the module
1668 This core driver provides register access and IRQ handling
1686 This driver uses board-specific data to initialize the resources
1706 This driver provides common support for accessing the device,
1715 TWL92330/Menelaus Power Management chip. This include voltage
1726 This is the core driver for the TI WL1273 FM radio. This MFD
1739 This driver provides common support for accessing the device;
1748 This is the core driver for the timberdale FPGA. This device is a
1762 This driver provides common support for accessing the device,
1810 and/or vx855_gpio drivers for this to do anything useful.
1882 CODEC. This driver provides common support for accessing
1898 when controlled using I2C. This driver provides common support
1911 when controlled using SPI. This driver provides common support
1926 systems. This option enables core support for the WM8350 with
1940 supported via the relevant subsystems. This driver provides
1954 supported via the relevant subsystems. This driver provides core
1964 Select this option to enable the STw481x chip driver used
1976 Select this option to get support for the ROHM BD71837
1989 Select this option to get support for the ROHM BD70528 Power
2006 Select this option to get support for the ROHM BD71828 Power
2020 Select this option to enable STM32 Low-Power Timer driver
2024 To compile this driver as a module, choose M here: the
2034 Select this option to enable STM32 timers driver used
2035 for PWM and IIO Timer. This driver allow to share the
2047 the relevant subsystems. This driver provides core support for the
2051 To compile this driver as a module, choose M here: the
2063 This driver provides common support for accessing the device,
2076 This driver provides common support WCD934x audio codec and its
2089 This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and
2096 This driver provides common support for accessing the device,
2140 Select this to get support for the Supervisory Processor
2148 This option enables basic support for the SGI IOC3-based
2149 controller cards. This option does not enable any specific
2165 This driver provides common support for accessing the device,