Lines Matching full:gpio3

424 	// and will reset GPIO3 after VBI_B is detected.  in budget_patch_attach()
425 	// (GPIO3 should be raised high by CPU to  in budget_patch_attach()
426 	// test if GPIO3 will generate vertical blank signal  in budget_patch_attach()
427 	// in budget patch GPIO3 is connected to VSYNC_B  in budget_patch_attach()
449 	// use 0x03 to track RPS1 interrupts - increase by 1 every gpio3 is toggled  in budget_patch_attach()
487 **      wave on GPIO3, changing when a field (TS_HEIGHT/2 "lines" of  in budget_patch_attach()
489 **      then, this GPIO3 output which is connected to the D1B_VSYNC  in budget_patch_attach()
498 **      this rps1 code will copy internal HS event to GPIO3 pin.  in budget_patch_attach()
499 **      GPIO3 is in budget-patch hardware connected to port B VSYNC  in budget_patch_attach()
558 	// Set GPIO3=1                                                  (p42)  in budget_patch_attach()
568 	// Set GPIO3=0                                                  (p42)  in budget_patch_attach()