Lines Matching full:leds
13 LEDs from both userspace and optionally, by kernel events (triggers).
20 This option enables the LED sysfs class in /sys/class/leds. You'll
21 need this to do anything useful with LEDs. If unsure, say N.
27 This option enables the flash LED sysfs class in /sys/class/leds.
28 It wraps LED Class and adds flash LEDs specific sysfs attributes
37 This option enables the multicolor LED sysfs class in /sys/class/leds.
40 for multicolor LEDs that are grouped together. This class is not
41 intended for single color LEDs. It can be built as a module.
48 for LED sysfs class devices under /sys/class/leds.
70 This option enables support for the LEDs on the AAT1290.
80 will be called leds-an30259a.
87 This driver makes the PC Engines APU1 front panel LEDs
94 module will be called leds-apu.
102 LEDs on Dell Wyse 3020 (Ariel) board via the KB3930 Embedded
124 will be called leds-aw2013.
132 This option enables support for LEDs connected to the BCM6328
141 This option enables support for LEDs connected to the BCM6358
150 This option enables support for LEDs offered by Motorola's
164 will be called leds-cr0014114.
177 will be called leds-el15203000.
186 This option enables basic support for the LEDs found on the front
187 side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs on the
215 This option enables support for the LEDs on National Semiconductor /
218 The LEDs can be controlled directly, through PWM input, or by the
228 This option enables support for LEDs connected to LM3642.
255 This option enables support for the LEDs on Sharp Locomo.
275 tristate "LED Support for Samsung S3C24XX GPIO LEDs"
279 This option enables support for LEDs connected to GPIO lines
295 This option enables support for the LEDs on the Freecom FSG-3.
298 tristate "LED Support for the WRAP series LEDs"
302 This option enables support for the PCEngines WRAP programmable LEDs.
316 This option enables support for the Cobalt Raq series LEDs.
325 LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
363 tristate "LED Support for GPIO connected LEDs"
367 This option enables support for the LEDs connected to GPIO
368 outputs. To be useful the particular board must have LEDs
369 and they must be connected to the GPIO lines. The LEDs must be
378 This option enables support for LEDs connected to the National
383 module will be called leds-lp3944.
392 This option enables support for LEDs connected to the Texas
396 module will be called leds-lp3952.
407 module will be called leds-lp50xx.
469 This option enables support for the Keyboard LEDs on the LP8788 PMIC.
478 This option enables support for the display cluster LEDs
488 programs through the leds subsystem. This LED have three
492 or through /sys/class/leds/clevo::mail/brightness. As this LED
511 module will be called leds-clevo-mail.
518 This option enables support for LEDs connected to PCA955x
538 This option enables support for LEDs connected to the PCA963x
543 tristate "LED support for status LEDs on WM831x PMICs"
547 This option enables support for the status LEDs of the WM831x
555 This option enables support for LEDs driven by the Wolfson
567 tristate "Dialog DA9052/DA9053 LEDS"
580 which can be used to control up to four LEDs.
587 This option enables support for pwm driven LEDs
594 This option enables support for regulator driven LEDs.
612 drive or power LEDs on the front panel. Using this driver
621 This option enables support for LEDs driven by a Linear Technology
634 be called leds-adp5520.
645 tristate "LED support for Network Space v2 GPIO LEDs"
650 This option enables support for the dual-GPIO LEDs found on the
659 tristate "LED support for Big Network series LEDs"
665 This option enables support for LEDs found on the LaCie 2Big
666 and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
675 This option enables support for the LEDs on the HTC ASIC3. The HTC
676 ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
678 period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
684 This option enables support for LEDs connected to TC6507
700 LEDs driver for MAX77650 family of PMICs from Maxim Integrated.
710 multifunction device. It has build in control for two leds in flash
725 This option enables support for LEDs connected to LM3554
732 This option enables support for the LEDs on the Bachmann OT200.
733 Say Y to enable LEDs on the Bachmann OT200.
739 Say Y here to include support for the MEN 14F021P00 BMC LEDs.
742 will be called leds-menf21bmc.
759 This option enables support for LEDs connected to ISSI IS31FL319x
764 called leds-is31fl319x.
780 LEDs.
783 called leds-sc27xx-bltc.
801 This option enables support for the system LEDs present on
804 will be called leds-powernv.
807 bool "LED support for LEDs on system controllers"
812 This option enables support for the LEDs on syscon type
829 This option enables support for the LEDs on the Mellanox
836 This option enables support for the LEDs on the Mellanox Ethernet and
839 module, choose 'M' here: the module will be called leds-mlxreg.
845 This option enables support for userspace LEDs. Say 'y' to enable this
854 This option enables support for the User1 and User2 LEDs on NI
858 will be called leds-nic78bx.
902 It is a single boost converter primarily for white LEDs and
910 This option enables support for the Red and White LEDs of
914 will be called leds-ip30.
932 source "drivers/leds/trigger/Kconfig"