Lines Matching full:ide
3 # IDE ATA ATAPI Block device driver configuration
6 # Select HAVE_IDE if IDE is supported
10 menuconfig IDE config
16 If you say Y here, your kernel will be able to manage ATA/(E)IDE and
17 ATAPI units. The most common cases are IDE hard drives and ATAPI
26 module will be called ide-core.
28 For further information, please read <file:Documentation/ide/ide.rst>.
32 if IDE
34 comment "Please see Documentation/ide/ide.rst for help/info on IDE drives"
60 The IDE driver (which you are currently configuring) supports
64 this config option enables the IDE driver's SATA support.
66 supports SATA controllers, and this (IDE) driver supports
78 The module will be called ide-gd_mod.
106 tristate "PCMCIA IDE support"
109 Support for Compact Flash cards, outboard IDE disks, tape drives,
113 tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
120 tristate "Include IDE/ATAPI CDROM support"
126 a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
132 along with other IDE devices, as "hdb" or "hdc", or something
138 module will be called ide-cd.
141 bool "Verbose error logging for IDE/ATAPI CDROM driver" if EXPERT
150 tristate "Include IDE/ATAPI TAPE support"
153 If you have an IDE tape drive using the ATAPI protocol, say Y.
154 ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
163 along with other IDE devices, as "hdb" or "hdc", or something
166 <file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.rst>
170 module will be called ide-tape.
173 bool "IDE ACPI support"
176 Implement ACPI support for generic IDE devices. On modern
180 bool "IDE Taskfile Access"
190 bool "legacy /proc/ide/ support"
191 depends on IDE && PROC_FS
195 /proc/ide. In Linux 2.6 this has been superseded by
200 comment "IDE chipset support/bugfixes"
203 tristate "generic/default IDE chipset support"
207 This is the generic IDE driver. This driver attaches to the
210 kernel or loaded before other ATA (IDE or libata) drivers
215 Also, currently, IDE generic doesn't allow IRQ sharing
219 to load IDE generic driver on modern systems.
224 tristate "Platform driver for IDE interfaces"
226 This is the platform IDE driver, used mostly for Memory Mapped
227 IDE devices, like Compact Flashes running in True IDE mode.
236 The CMD-Technologies CMD640 IDE chip is used on many common 486 and
242 enables access to the secondary IDE ports in some CMD640 based
253 the "CSA-6400E PCI to IDE controller" that some people have. For
254 details, read <file:Documentation/ide/ide.rst>.
261 prefetch on CMD640 IDE interfaces. For details, read
262 <file:Documentation/ide/ide.rst>. If you have a CMD640 IDE interface
279 comment "PCI IDE chipsets support"
285 bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
286 depends on IDE=y && BLK_DEV_IDEPCI
289 Probe IDE PCI devices in the order in which they appear on the
291 instead of the order in which IDE PCI host drivers are loaded.
294 IDE devices is unreliable and use other means for achieving
304 Normally, IDE controllers built into the motherboard (on-board
316 IDE devices is unreliable and use other means for achieving it
322 tristate "Generic PCI IDE Chipset Support"
325 This option provides generic support for various PCI IDE Chipsets
333 Please read the comments at the top of <file:drivers/ide/opti621.c>.
340 The PC-Technologies RZ1000 IDE chip is used on many common 486 and
358 IDE controllers. This allows the kernel to change PIO, DMA and UDMA
371 <file:drivers/ide/alim15x3.c>.
376 tristate "AMD and nVidia IDE support"
387 tristate "ATI IXP chipset IDE support"
395 Say Y here if you have an ATI IXP chipset IDE controller.
402 Say Y here if you have an IDE controller which uses any of these
406 tristate "Compaq Triflex IDE support"
409 Say Y here if you have a Compaq Triflex IDE controller, such
483 ide-probe at boot. It is reported to support DVD II drives, by the
498 This driver adds support for the on-board IDE controller on the
510 tristate "IT8172 IDE support"
513 This driver adds support for the IDE controller on the
517 tristate "IT8213 IDE support"
520 This driver adds support for the ITE 8213 IDE controller.
523 tristate "IT821X IDE support"
526 This driver adds support for the ITE 8211 IDE controller and the
527 IT 8212 IDE RAID controller in both RAID and pass-through mode.
536 Please read the comments at the top of <file:drivers/ide/ns87415.c>.
555 <file:drivers/ide/pdc202xx_old.c>.
592 Please read the comments at the top of <file:drivers/ide/sis5513.c>.
600 If you have a Winbond SL82c105 IDE controller, say Y here to enable
615 <file:drivers/ide/slc90e66.c>.
622 using the Tekram TRM290 PCI IDE chip. Volunteers are
624 Please read the comments at the top of <file:drivers/ide/trm290.c>.
631 This driver adds explicit support for VIA BusMastering IDE chips.
645 tristate "PowerMac on-board IDE support"
650 This driver provides support for the on-board IDE controller on
666 tristate "TX4938 internal IDE support"
671 tristate "TX4939 internal IDE support"
676 tristate "ICS IDE interface support"
679 On Acorn systems, say Y here if you wish to use the ICS IDE
688 the ICS IDE driver.
698 tristate "Amiga Gayle IDE interface support"
701 This is the IDE driver for the Amiga Gayle IDE interface. It supports
702 both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
703 This includes on-board IDE interfaces on some Amiga models (A600,
704 A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
707 It also provides support for the so-called `IDE doublers' (made
709 the on-board IDE interface of some Amiga models. Using such an IDE
710 doubler, you can connect up to four instead of two IDE devices to
711 the Amiga's on-board IDE interface. The feature is enabled at kernel
714 Say Y if you have an Amiga with a Gayle IDE interface and want to use
715 IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
719 use Gayle IDE interfaces on the Zorro expansion bus.
722 tristate "Buddha/Catweasel/X-Surf IDE interface support"
725 This is the IDE driver for the IDE interfaces on the Buddha, Catweasel
730 use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
731 to one of its IDE interfaces.
734 tristate "Falcon IDE interface support"
737 This is the IDE driver for the on-board IDE interface on the Atari
738 Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
739 disks, CD-ROM drives, etc.) that are connected to the on-board IDE
743 tristate "Macintosh Quadra/Powerbook IDE interface support"
746 This is the IDE driver for the on-board IDE interface on some m68k
748 Powerbook 150. The IDE interface on the Powerbook 190 is not
752 Say Y if you have such an Macintosh model and want to use IDE
754 on-board IDE interface.
757 tristate "Q40/Q60 IDE interface support"
760 Enable the on-board IDE controller in the Q40/Q60. This should
765 tristate "Palmchip bk3710 IDE controller support"
770 Say Y here if you want to support the onchip IDE controller on the
776 comment "Other IDE chipsets support"
785 runtime using the "ide-4drives.probe" kernel boot parameter if you
794 boot parameter. It enables support for the secondary IDE interface
797 See the files <file:Documentation/ide/ide.rst> and
798 <file:drivers/ide/ali14xx.c> for more info.
806 boot parameter. It enables support for the secondary IDE interface
808 well. See the <file:Documentation/ide/ide.rst> and
809 <file:drivers/ide/dtc2278.c> files for more info.
817 boot parameter. It enables support for the secondary IDE interface
819 See the <file:Documentation/ide/ide.rst> and
820 <file:drivers/ide/ht6560b.c> files for more info.
829 <file:Documentation/ide/ide.rst> and <file:drivers/ide/qd65xx.c>
838 boot parameter. It enables support for the secondary IDE interface
840 See the files <file:Documentation/ide/ide.rst> and
841 <file:drivers/ide/umc8672.c> for more info.
849 endif # IDE