35  * @preset:		array of preset values
50 	unsigned int preset[QUAD8_NUM_COUNTERS];  member
89 /* Preset Register to Counter */
93 /* Transfer Preset Register LSB to FCK Prescaler */
173 		/* Counter can only be set via Preset Register */  in quad8_write_raw()
177 		/* Transfer Preset Register to Counter */  in quad8_write_raw()
183 		/* Set Preset Register back to original value */  in quad8_write_raw()
184 		val = priv->preset[chan->channel];  in quad8_write_raw()
260 	return snprintf(buf, PAGE_SIZE, "%u\n", priv->preset[chan->channel]);  in quad8_read_preset()
268 	unsigned int preset;  in quad8_write_preset()  local
272 	ret = kstrtouint(buf, 0, &preset);  in quad8_write_preset()
277 	if (preset > 0xFFFFFF)  in quad8_write_preset()
282 	priv->preset[chan->channel] = preset;  in quad8_write_preset()
287 	/* Set Preset Register */  in quad8_write_preset()
289 		outb(preset >> (8 * i), base_offset);  in quad8_write_preset()
319 	/* Preset enable is active low in Input/Output Control register */  in quad8_write_set_to_preset_on_index()
564 		.name = "preset",
688 	/* Counter can only be set via Preset Register */  in quad8_count_write()
692 	/* Transfer Preset Register to Counter */  in quad8_count_write()
698 	/* Set Preset Register back to original value */  in quad8_count_write()
699 	val = priv->preset[count->id];  in quad8_count_write()
1141 	return sprintf(buf, "%u\n", priv->preset[count->id]);  in quad8_count_preset_read()
1145 		unsigned int preset)  in quad8_preset_register_set()  argument
1150 	quad8iio->preset[id] = preset;  in quad8_preset_register_set()
1155 	/* Set Preset Register */  in quad8_preset_register_set()
1157 		outb(preset >> (8 * i), base_offset);  in quad8_preset_register_set()
1164 	unsigned int preset;  in quad8_count_preset_write()  local
1167 	ret = kstrtouint(buf, 0, &preset);  in quad8_count_preset_write()
1172 	if (preset > 0xFFFFFF)  in quad8_count_preset_write()
1177 	quad8_preset_register_set(priv, count->id, preset);  in quad8_count_preset_write()
1191 	/* Range Limit and Modulo-N count modes use preset value as ceiling */  in quad8_count_ceiling_read()
1196 		return sprintf(buf, "%u\n", priv->preset[count->id]);  in quad8_count_ceiling_read()
1222 	/* Range Limit and Modulo-N count modes use preset value as ceiling */  in quad8_count_ceiling_write()
1256 	/* Preset enable is active low in Input/Output Control register */  in quad8_count_preset_enable_write()
1499 		.name = "preset",
1586 		/* Reset Preset Register */  in quad8_probe()
1595 		/* Disable A and B inputs; preset on index; FLG1 as Carry */  in quad8_probe()