339 static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg)  in cprman_read()  function
369 	while (cprman_read(cprman, CM_OSCCOUNT)) {  in bcm2835_measure_tcnt_mux()
380 	while (cprman_read(cprman, CM_TCNTCTL) & CM_BUSY) {  in bcm2835_measure_tcnt_mux()
389 	count = cprman_read(cprman, CM_TCNTCNT);  in bcm2835_measure_tcnt_mux()
526 	return cprman_read(cprman, data->a2w_ctrl_reg) &  in bcm2835_pll_is_on()
590 	u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg);  in bcm2835_pll_get_rate()
597 	fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK;  in bcm2835_pll_get_rate()
600 	using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &  in bcm2835_pll_get_rate()
620 		     cprman_read(cprman, data->a2w_ctrl_reg) |  in bcm2835_pll_off()
633 		     cprman_read(cprman, data->a2w_ctrl_reg) &  in bcm2835_pll_on()
639 		     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);  in bcm2835_pll_on()
644 	while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) {  in bcm2835_pll_on()
655 		     cprman_read(cprman, data->a2w_ctrl_reg) |  in bcm2835_pll_on()
700 		ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);  in bcm2835_pll_set_rate()
724 		     cprman_read(cprman, A2W_XOSC_CTRL) |  in bcm2835_pll_set_rate()
734 	a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg);  in bcm2835_pll_set_rate()
805 	return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);  in bcm2835_pll_divider_is_on()
829 		     (cprman_read(cprman, data->cm_reg) &  in bcm2835_pll_divider_off()
832 		     cprman_read(cprman, data->a2w_reg) |  in bcm2835_pll_divider_off()
845 		     cprman_read(cprman, data->a2w_reg) &  in bcm2835_pll_divider_on()
849 		     cprman_read(cprman, data->cm_reg) & ~data->hold_mask);  in bcm2835_pll_divider_on()
871 	cm = cprman_read(cprman, data->cm_reg);  in bcm2835_pll_divider_set_rate()
931 	return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0;  in bcm2835_clock_is_on()
1014 	div = cprman_read(cprman, data->div_reg);  in bcm2835_clock_get_rate()
1025 	while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) {  in bcm2835_clock_wait_busy()
1043 		     cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE);  in bcm2835_clock_off()
1058 		     cprman_read(cprman, data->ctl_reg) |  in bcm2835_clock_on()
1096 	ctl = cprman_read(cprman, data->ctl_reg) & ~CM_FRAC;  in bcm2835_clock_set_rate()
1255 	u32 src = cprman_read(cprman, data->ctl_reg);  in bcm2835_clock_get_parent()
1456 		if (!(cprman_read(cprman, clock_data->ctl_reg) & CM_ENABLE))  in bcm2835_register_clock()