Lines Matching +full:led +full:- +full:1
1 // SPDX-License-Identifier: GPL-2.0
2 /dts-v1/;
8 #include <dt-bindings/interrupt-controller/mips-gic.h>
11 #address-cells = <1>;
12 #size-cells = <1>;
13 compatible = "mti,sead-3";
14 model = "MIPS SEAD-3";
17 stdout-path = "serial1:115200";
36 cpu_intc: interrupt-controller {
37 compatible = "mti,cpu-interrupt-controller";
39 interrupt-controller;
40 #interrupt-cells = <1>;
43 gic: interrupt-controller@1b1c0000 {
47 interrupt-controller;
48 #interrupt-cells = <3>;
51 * Declare the interrupt-parent even though the mti,gic
56 interrupt-parent = <&cpu_intc>;
59 ehci@1b200000 {
60 compatible = "generic-ehci";
63 interrupt-parent = <&gic>;
66 has-transaction-translator;
69 flash@1c000000 {
70 compatible = "intel,28f128j3", "cfi-flash";
72 #address-cells = <1>;
73 #size-cells = <1>;
74 bank-width = <4>;
77 compatible = "fixed-partitions";
78 #address-cells = <1>;
79 #size-cells = <1>;
81 user-fs@0 {
86 board-config@3e0000 {
93 fpga_regs: system-controller@1f000000 {
94 compatible = "mti,sead3-fpga", "syscon", "simple-mfd";
98 compatible = "syscon-reboot";
105 compatible = "restart-poweroff";
109 system-controller@1f000200 {
110 compatible = "mti,sead3-cpld", "syscon", "simple-mfd";
113 led@10.0 {
114 compatible = "register-bit-led";
119 led@10.1 {
120 compatible = "register-bit-led";
125 led@10.2 {
126 compatible = "register-bit-led";
131 led@10.3 {
132 compatible = "register-bit-led";
137 led@10.4 {
138 compatible = "register-bit-led";
143 led@10.5 {
144 compatible = "register-bit-led";
149 led@10.6 {
150 compatible = "register-bit-led";
155 led@10.7 {
156 compatible = "register-bit-led";
162 led@18.0 {
163 compatible = "register-bit-led";
168 led@18.1 {
169 compatible = "register-bit-led";
174 led@18.2 {
175 compatible = "register-bit-led";
180 led@18.3 {
181 compatible = "register-bit-led";
186 led@18.4 {
187 compatible = "register-bit-led";
192 led@18.5 {
193 compatible = "register-bit-led";
198 led@18.6 {
199 compatible = "register-bit-led";
204 led@18.7 {
205 compatible = "register-bit-led";
212 compatible = "mti,sead3-lcd";
218 uart0: uart@1f000900 {
221 reg-io-width = <4>;
222 reg-shift = <2>;
224 clock-frequency = <14745600>;
226 interrupt-parent = <&gic>;
229 no-loopback-test;
233 uart1: uart@1f000800 {
236 reg-io-width = <4>;
237 reg-shift = <2>;
239 clock-frequency = <14745600>;
241 interrupt-parent = <&gic>;
244 no-loopback-test;
247 eth@1f010000 {
250 reg-io-width = <4>;
252 interrupt-parent = <&gic>;
255 phy-mode = "mii";
256 smsc,irq-push-pull;
257 smsc,save-mac-address;