Lines Matching +full:vbus +full:- +full:divider

1 // SPDX-License-Identifier: GPL-2.0
3  * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
6 /dts-v1/;
8 #include "k3-j7200-som-p0.dtsi"
9 #include <dt-bindings/net/ti-dp83867.h>
10 #include <dt-bindings/mux/ti-serdes.h>
14 		stdout-path = "serial2:115200n8";
20 	mcu_cpsw_pins_default: mcu-cpsw-pins-default {
21 		pinctrl-single,pins = <
37 	mcu_mdio_pins_default: mcu-mdio1-pins-default {
38 		pinctrl-single,pins = <
46 	main_i2c0_pins_default: main-i2c0-pins-default {
47 		pinctrl-single,pins = <
53 	main_i2c1_pins_default: main-i2c1-pins-default {
54 		pinctrl-single,pins = <
60 	main_mmc1_pins_default: main-mmc1-pins-default {
61 		pinctrl-single,pins = <
73 	main_usbss0_pins_default: main-usbss0-pins-default {
74 		pinctrl-single,pins = <
87 	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
131 	pinctrl-names = "default";
132 	pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
136 	phy0: ethernet-phy@0 {
138 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
139 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
144 	phy-mode = "rgmii-rxid";
145 	phy-handle = <&phy0>;
149 	pinctrl-names = "default";
150 	pinctrl-0 = <&main_i2c0_pins_default>;
151 	clock-frequency = <400000>;
156 		gpio-controller;
157 		#gpio-cells = <2>;
163 		gpio-controller;
164 		#gpio-cells = <2>;
169 	pinctrl-names = "default";
170 	pinctrl-0 = <&main_i2c1_pins_default>;
171 	clock-frequency = <400000>;
176 		gpio-controller;
177 		#gpio-cells = <2>;
183 	non-removable;
184 	ti,driver-strength-ohm = <50>;
185 	disable-wp;
190 	pinctrl-0 = <&main_mmc1_pins_default>;
191 	pinctrl-names = "default";
192 	ti,driver-strength-ohm = <50>;
193 	disable-wp;
197 	idle-states = <J7200_SERDES0_LANE0_PCIE1_LANE0>, <J7200_SERDES0_LANE1_PCIE1_LANE1>,
202 	idle-states = <1>; /* USB0 to SERDES lane 3 */
206 	pinctrl-names = "default";
207 	pinctrl-0 = <&main_usbss0_pins_default>;
208 	ti,vbus-divider;
209 	ti,usb2-only;
214 	maximum-speed = "high-speed";