Lines Matching +full:vccio +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
4 #include <dt-bindings/input/input.h>
9 compatible = "zkmagic,a95x-z2", "rockchip,rk3318";
12 stdout-path = "serial2:1500000n8";
15 adc-keys {
16 compatible = "adc-keys";
17 io-channels = <&saradc 0>;
18 io-channel-names = "buttons";
19 keyup-threshold-microvolt = <1800000>;
20 poll-interval = <100>;
25 press-threshold-microvolt = <17000>;
29 ir-receiver {
30 compatible = "gpio-ir-receiver";
32 pinctrl-0 = <&ir_int>;
33 pinctrl-names = "default";
37 compatible = "gpio-leds";
38 pinctrl-0 = <&cyx_led_pin>;
39 pinctrl-names = "default";
41 cyx_led: led-0 {
42 default-state = "on";
48 sdio_pwrseq: sdio-pwrseq {
49 compatible = "mmc-pwrseq-simple";
50 pinctrl-0 = <&wifi_enable_h>;
51 pinctrl-names = "default";
52 reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
55 spdif-sound {
56 compatible = "simple-audio-card";
57 simple-audio-card,name = "SPDIF";
59 simple-audio-card,cpu {
60 sound-dai = <&spdif>;
63 simple-audio-card,codec {
64 sound-dai = <&spdif_out>;
68 spdif_out: spdif-out {
69 compatible = "linux,spdif-dit";
70 #sound-dai-cells = <0>;
74 vccio_1v8: vccio-1v8-regulator {
75 compatible = "regulator-fixed";
76 regulator-name = "vccio_1v8";
77 regulator-min-microvolt = <1800000>;
78 regulator-max-microvolt = <1800000>;
79 regulator-always-on;
82 vccio_3v3: vccio-3v3-regulator {
83 compatible = "regulator-fixed";
84 regulator-name = "vccio_3v3";
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
87 regulator-always-on;
90 vcc_otg_vbus: otg-vbus-regulator {
91 compatible = "regulator-fixed";
93 pinctrl-0 = <&otg_vbus_drv>;
94 pinctrl-names = "default";
95 regulator-name = "vcc_otg_vbus";
96 regulator-min-microvolt = <5000000>;
97 regulator-max-microvolt = <5000000>;
98 enable-active-high;
101 vcc_sd: sdmmc-regulator {
102 compatible = "regulator-fixed";
104 pinctrl-0 = <&sdmmc0m1_pin>;
105 pinctrl-names = "default";
106 regulator-name = "vcc_sd";
107 regulator-min-microvolt = <3300000>;
108 regulator-max-microvolt = <3300000>;
109 vin-supply = <&vccio_3v3>;
112 vdd_arm: vdd-arm {
113 compatible = "pwm-regulator";
115 regulator-name = "vdd_arm";
116 regulator-min-microvolt = <950000>;
117 regulator-max-microvolt = <1400000>;
118 regulator-settling-time-up-us = <250>;
119 regulator-always-on;
120 regulator-boot-on;
123 vdd_log: vdd-log {
124 compatible = "pwm-regulator";
126 regulator-name = "vdd_log";
127 regulator-min-microvolt = <900000>;
128 regulator-max-microvolt = <1300000>;
129 regulator-settling-time-up-us = <250>;
130 regulator-always-on;
131 regulator-boot-on;
144 cpu-supply = <&vdd_arm>;
148 cpu-supply = <&vdd_arm>;
152 cpu-supply = <&vdd_arm>;
156 cpu-supply = <&vdd_arm>;
160 opp-1200000000 {
164 opp-1296000000 {
170 bus-width = <8>;
171 cap-mmc-highspeed;
172 non-removable;
173 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
174 pinctrl-names = "default";
179 assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
180 assigned-clock-rate = <50000000>;
181 assigned-clocks = <&cru SCLK_MAC2PHY>;
187 mali-supply = <&vdd_log>;
191 ddc-i2c-scl-high-time-ns = <9625>;
192 ddc-i2c-scl-low-time-ns = <10000>;
213 pmuio-supply = <&vccio_3v3>;
214 vccio1-supply = <&vccio_3v3>;
215 vccio2-supply = <&vccio_1v8>;
216 vccio3-supply = <&vccio_3v3>;
217 vccio4-supply = <&vccio_1v8>;
218 vccio5-supply = <&vccio_3v3>;
219 vccio6-supply = <&vccio_3v3>;
225 ir_int: ir-int {
231 cyx_led_pin: cyx-led-pin {
237 pwm0_pin_pull_up: pwm0-pin-pull-up {
243 pwm1_pin_pull_up: pwm1-pin-pull-up {
248 sdio-pwrseq {
249 wifi_enable_h: wifi-enable-h {
255 clk_32k_out: clk-32k-out {
261 host_vbus_drv: host-vbus-drv {
265 otg_vbus_drv: otg-vbus-drv {
272 pinctrl-0 = <&pwm0_pin_pull_up>;
273 pinctrl-names = "active";
278 pinctrl-0 = <&pwm1_pin_pull_up>;
279 pinctrl-names = "active";
284 vref-supply = <&vccio_1v8>;
289 bus-width = <4>;
290 cap-sd-highspeed;
291 cap-sdio-irq;
292 keep-power-in-suspend;
293 max-frequency = <125000000>;
294 mmc-pwrseq = <&sdio_pwrseq>;
295 non-removable;
296 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &clk_32k_out>;
297 pinctrl-names = "default";
298 sd-uhs-sdr104;
303 bus-width = <4>;
304 cap-sd-highspeed;
305 pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
306 pinctrl-names = "default";
307 vmmc-supply = <&vcc_sd>;
312 pinctrl-0 = <&spdifm0_tx>;
329 rockchip,hw-tshut-temp = <120000>;
342 phy-supply = <&vcc_otg_vbus>;
347 pinctrl-0 = <&uart0_xfer &uart0_cts>;