Lines Matching +full:fixed +full:- +full:frequency
1 // SPDX-License-Identifier: GPL-2.0
9 #include <dt-bindings/gpio/gpio.h>
19 stdout-path = "serial0:115200n8";
22 hdmi0-out {
23 compatible = "hdmi-connector";
28 remote-endpoint = <&rcar_dw_hdmi0_out>;
34 compatible = "gpio-leds";
54 compatible = "regulator-fixed";
55 regulator-name = "fixed-1.8V";
56 regulator-min-microvolt = <1800000>;
57 regulator-max-microvolt = <1800000>;
58 regulator-boot-on;
59 regulator-always-on;
63 compatible = "regulator-fixed";
64 regulator-name = "fixed-3.3V";
65 regulator-min-microvolt = <3300000>;
66 regulator-max-microvolt = <3300000>;
67 regulator-boot-on;
68 regulator-always-on;
72 compatible = "audio-graph-card";
74 label = "rcar-sound";
79 vbus0_usb2: regulator-vbus0-usb2 {
80 compatible = "regulator-fixed";
82 regulator-name = "USB20_VBUS0";
83 regulator-min-microvolt = <5000000>;
84 regulator-max-microvolt = <5000000>;
87 enable-active-high;
90 vccq_sdhi0: regulator-vccq-sdhi0 {
91 compatible = "regulator-gpio";
93 regulator-name = "SDHI0 VccQ";
94 regulator-min-microvolt = <1800000>;
95 regulator-max-microvolt = <3300000>;
98 gpios-states = <1>;
102 x302_clk: x302-clock {
103 compatible = "fixed-clock";
104 #clock-cells = <0>;
105 clock-frequency = <33000000>;
108 x304_clk: x304-clock {
109 compatible = "fixed-clock";
110 #clock-cells = <0>;
111 clock-frequency = <25000000>;
116 clock-frequency = <22579200>;
132 clock-frequency = <16666666>;
136 clock-frequency = <32768>;
140 usb1-reset {
141 gpio-hog;
143 output-low;
144 line-name = "usb1-reset";
155 remote-endpoint = <&hdmi0_con>;
161 remote-endpoint = <&rsnd_endpoint>;
168 pinctrl-0 = <&hscif0_pins>;
169 pinctrl-names = "default";
171 uart-has-rtscts;
181 clock-frequency = <400000>;
184 versaclock5: clock-generator@6a {
187 #clock-cells = <1>;
189 clock-names = "xin";
202 clock-frequency = <100000000>;
206 pinctrl-0 = <&scif_clk_pins>;
207 pinctrl-names = "default";
227 power-source = <3300>;
233 power-source = <1800>;
239 power-source = <1800>;
245 power-source = <1800>;
261 bias-pull-up;
272 timeout-sec = <60>;
277 pinctrl-0 = <&scif2_pins>;
278 pinctrl-names = "default";
284 clock-frequency = <14745600>;
288 pinctrl-0 = <&sdhi0_pins>;
289 pinctrl-1 = <&sdhi0_pins_uhs>;
290 pinctrl-names = "default", "state_uhs";
292 vmmc-supply = <®_3p3v>;
293 vqmmc-supply = <&vccq_sdhi0>;
294 cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
295 bus-width = <4>;
296 sd-uhs-sdr50;
297 sd-uhs-sdr104;
303 pinctrl-0 = <&sdhi2_pins>;
304 pinctrl-names = "default";
306 vmmc-supply = <&wlan_en_reg>;
307 bus-width = <4>;
308 non-removable;
309 cap-power-off-card;
310 keep-power-in-suspend;
312 #address-cells = <1>;
313 #size-cells = <0>;
317 interrupt-parent = <&gpio2>;
323 pinctrl-0 = <&sdhi3_pins>;
324 pinctrl-1 = <&sdhi3_pins>;
325 pinctrl-names = "default", "state_uhs";
327 vmmc-supply = <®_3p3v>;
328 vqmmc-supply = <®_1p8v>;
329 bus-width = <8>;
330 mmc-hs200-1_8v;
331 non-removable;
332 fixed-emmc-driver-type = <1>;
337 clock-frequency = <50000000>;
341 pinctrl-0 = <&usb0_pins>;
342 pinctrl-names = "default";
344 vbus-supply = <&vbus0_usb2>;
349 pinctrl-0 = <&usb1_pins>;
350 pinctrl-names = "default";
357 phy-names = "usb";
369 clock-frequency = <100000000>;
373 pinctrl-0 = <&usb30_pins>;
374 pinctrl-names = "default";