Lines Matching +full:regulator +full:- +full:max +full:- +full:microamp

1 // SPDX-License-Identifier: GPL-2.0
16 stdout-path = "serial0:115200n8";
19 vph_pwr: vph-pwr-regulator {
20 compatible = "regulator-fixed";
21 regulator-name = "vph_pwr";
22 regulator-always-on;
23 regulator-boot-on;
31 compatible = "qcom,wcn3990-bt";
33 vddio-supply = <&vreg_s4a_1p8>;
34 vddxo-supply = <&vreg_l7a_1p8>;
35 vddrf-supply = <&vreg_l17a_1p3>;
36 vddch0-supply = <&vreg_l25a_3p3>;
37 max-speed = <3200000>;
110 pm8005-regulators {
111 compatible = "qcom,pm8005-regulators";
113 vdd_s1-supply = <&vph_pwr>;
116 regulator-min-microvolt = <524000>;
117 regulator-max-microvolt = <1100000>;
118 regulator-enable-ramp-delay = <500>;
121 regulator-always-on;
129 vdda-pll-supply = <&vreg_l12a_1p8>;
130 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
138 pm8998-regulators {
139 compatible = "qcom,rpm-pm8998-regulators";
141 vdd_s1-supply = <&vph_pwr>;
142 vdd_s2-supply = <&vph_pwr>;
143 vdd_s3-supply = <&vph_pwr>;
144 vdd_s4-supply = <&vph_pwr>;
145 vdd_s5-supply = <&vph_pwr>;
146 vdd_s6-supply = <&vph_pwr>;
147 vdd_s7-supply = <&vph_pwr>;
148 vdd_s8-supply = <&vph_pwr>;
149 vdd_s9-supply = <&vph_pwr>;
150 vdd_s10-supply = <&vph_pwr>;
151 vdd_s11-supply = <&vph_pwr>;
152 vdd_s12-supply = <&vph_pwr>;
153 vdd_s13-supply = <&vph_pwr>;
154 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
155 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
156 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
157 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
158 vdd_l6-supply = <&vreg_s5a_2p04>;
159 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
160 vdd_l9-supply = <&vreg_bob>;
161 vdd_l10_l23_l25-supply = <&vreg_bob>;
162 vdd_l13_l19_l21-supply = <&vreg_bob>;
163 vdd_l16_l28-supply = <&vreg_bob>;
164 vdd_l18_l22-supply = <&vreg_bob>;
165 vdd_l20_l24-supply = <&vreg_bob>;
166 vdd_l26-supply = <&vreg_s3a_1p35>;
167 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
170 regulator-min-microvolt = <1352000>;
171 regulator-max-microvolt = <1352000>;
174 regulator-min-microvolt = <1800000>;
175 regulator-max-microvolt = <1800000>;
176 regulator-allow-set-load;
179 regulator-min-microvolt = <1904000>;
180 regulator-max-microvolt = <2040000>;
183 regulator-min-microvolt = <900000>;
184 regulator-max-microvolt = <1028000>;
187 regulator-min-microvolt = <880000>;
188 regulator-max-microvolt = <880000>;
191 regulator-min-microvolt = <1200000>;
192 regulator-max-microvolt = <1200000>;
195 regulator-min-microvolt = <1000000>;
196 regulator-max-microvolt = <1000000>;
199 regulator-min-microvolt = <800000>;
200 regulator-max-microvolt = <800000>;
203 regulator-min-microvolt = <1808000>;
204 regulator-max-microvolt = <1808000>;
207 regulator-min-microvolt = <1800000>;
208 regulator-max-microvolt = <1800000>;
211 regulator-min-microvolt = <1200000>;
212 regulator-max-microvolt = <1200000>;
215 regulator-min-microvolt = <1808000>;
216 regulator-max-microvolt = <2960000>;
219 regulator-min-microvolt = <1808000>;
220 regulator-max-microvolt = <2960000>;
223 regulator-min-microvolt = <1000000>;
224 regulator-max-microvolt = <1000000>;
227 regulator-min-microvolt = <1800000>;
228 regulator-max-microvolt = <1800000>;
231 regulator-min-microvolt = <1808000>;
232 regulator-max-microvolt = <2960000>;
235 regulator-min-microvolt = <1880000>;
236 regulator-max-microvolt = <1880000>;
239 regulator-min-microvolt = <1800000>;
240 regulator-max-microvolt = <1800000>;
243 regulator-min-microvolt = <2704000>;
244 regulator-max-microvolt = <2704000>;
247 regulator-min-microvolt = <1304000>;
248 regulator-max-microvolt = <1304000>;
251 regulator-min-microvolt = <2704000>;
252 regulator-max-microvolt = <2704000>;
255 regulator-min-microvolt = <3008000>;
256 regulator-max-microvolt = <3008000>;
259 regulator-min-microvolt = <2960000>;
260 regulator-max-microvolt = <2960000>;
261 regulator-allow-set-load;
264 regulator-min-microvolt = <2960000>;
265 regulator-max-microvolt = <2960000>;
266 regulator-allow-set-load;
267 regulator-system-load = <800000>;
270 regulator-min-microvolt = <2864000>;
271 regulator-max-microvolt = <2864000>;
274 regulator-min-microvolt = <3312000>;
275 regulator-max-microvolt = <3312000>;
278 regulator-min-microvolt = <3088000>;
279 regulator-max-microvolt = <3088000>;
282 regulator-min-microvolt = <3104000>;
283 regulator-max-microvolt = <3312000>;
286 regulator-min-microvolt = <1200000>;
287 regulator-max-microvolt = <1200000>;
288 regulator-allow-set-load;
291 regulator-min-microvolt = <3008000>;
292 regulator-max-microvolt = <3008000>;
296 regulator-min-microvolt = <1800000>;
297 regulator-max-microvolt = <1800000>;
301 regulator-min-microvolt = <1800000>;
302 regulator-max-microvolt = <1800000>;
307 pmi8998-regulators {
308 compatible = "qcom,rpm-pmi8998-regulators";
310 vdd_bob-supply = <&vph_pwr>;
313 regulator-min-microvolt = <3312000>;
314 regulator-max-microvolt = <3600000>;
328 gpio-reserved-ranges = <0 4>, <81 4>;
333 cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
335 vmmc-supply = <&vreg_l21a_2p95>;
336 vqmmc-supply = <&vreg_l13a_2p95>;
338 pinctrl-names = "default", "sleep";
339 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
340 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
348 vcc-supply = <&vreg_l20a_2p95>;
349 vccq-supply = <&vreg_l26a_1p2>;
350 vccq2-supply = <&vreg_s4a_1p8>;
351 vcc-max-microamp = <750000>;
352 vccq-max-microamp = <560000>;
353 vccq2-max-microamp = <750000>;
357 vdda-phy-supply = <&vreg_l1a_0p875>;
358 vdda-pll-supply = <&vreg_l2a_1p2>;
359 vddp-ref-clk-supply = <&vreg_l26a_1p2>;
360 vdda-phy-max-microamp = <51400>;
361 vdda-pll-max-microamp = <14600>;
362 vddp-ref-clk-max-microamp = <100>;
363 vddp-ref-clk-always-on;
371 dr_mode = "host"; /* Force to host until we have Type-C hooked up */
377 vdda-phy-supply = <&vreg_l1a_0p875>;
378 vdda-pll-supply = <&vreg_l2a_1p2>;
384 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
385 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
386 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
387 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
390 /* PINCTRL - board-specific pinctrl */
393 /delete-property/ bias-disable;
395 * Configure a pull-up on 45 (RX). This is needed to
397 * module is in tri-state (module powered off or not
400 bias-pull-up;
404 /delete-property/ bias-disable;
406 * Configure a pull-down on 47 (CTS) to match the pull
409 bias-pull-down;