Lines Matching +full:regulator +full:- +full:system +full:- +full:load
1 // SPDX-License-Identifier: GPL-2.0
18 vph_pwr: vph-pwr-regulator {
19 compatible = "regulator-fixed";
20 regulator-name = "vph_pwr";
21 regulator-always-on;
22 regulator-boot-on;
30 compatible = "qcom,wcn3990-bt";
32 vddio-supply = <&vreg_s4a_1p8>;
33 vddxo-supply = <&vreg_l7a_1p8>;
34 vddrf-supply = <&vreg_l17a_1p3>;
35 vddch0-supply = <&vreg_l25a_3p3>;
36 max-speed = <3200000>;
46 cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
50 cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
54 cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
58 cpu-idle-states = <&LITTLE_CPU_SLEEP_1>;
62 cpu-idle-states = <&BIG_CPU_SLEEP_1>;
66 cpu-idle-states = <&BIG_CPU_SLEEP_1>;
70 cpu-idle-states = <&BIG_CPU_SLEEP_1>;
74 cpu-idle-states = <&BIG_CPU_SLEEP_1>;
78 pm8005-regulators {
79 compatible = "qcom,pm8005-regulators";
81 vdd_s1-supply = <&vph_pwr>;
84 regulator-min-microvolt = <524000>;
85 regulator-max-microvolt = <1100000>;
86 regulator-enable-ramp-delay = <500>;
89 regulator-always-on;
97 vdda-pll-supply = <&vreg_l12a_1p8>;
98 vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
102 pm8998-regulators {
103 compatible = "qcom,rpm-pm8998-regulators";
105 vdd_s1-supply = <&vph_pwr>;
106 vdd_s2-supply = <&vph_pwr>;
107 vdd_s3-supply = <&vph_pwr>;
108 vdd_s4-supply = <&vph_pwr>;
109 vdd_s5-supply = <&vph_pwr>;
110 vdd_s6-supply = <&vph_pwr>;
111 vdd_s7-supply = <&vph_pwr>;
112 vdd_s8-supply = <&vph_pwr>;
113 vdd_s9-supply = <&vph_pwr>;
114 vdd_s10-supply = <&vph_pwr>;
115 vdd_s11-supply = <&vph_pwr>;
116 vdd_s12-supply = <&vph_pwr>;
117 vdd_s13-supply = <&vph_pwr>;
118 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
119 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
120 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
121 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
122 vdd_l6-supply = <&vreg_s5a_2p04>;
123 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
124 vdd_l9-supply = <&vph_pwr>;
125 vdd_l10_l23_l25-supply = <&vph_pwr>;
126 vdd_l13_l19_l21-supply = <&vph_pwr>;
127 vdd_l16_l28-supply = <&vph_pwr>;
128 vdd_l18_l22-supply = <&vph_pwr>;
129 vdd_l20_l24-supply = <&vph_pwr>;
130 vdd_l26-supply = <&vreg_s3a_1p35>;
131 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
134 regulator-min-microvolt = <1352000>;
135 regulator-max-microvolt = <1352000>;
138 regulator-min-microvolt = <1800000>;
139 regulator-max-microvolt = <1800000>;
140 regulator-allow-set-load;
143 regulator-min-microvolt = <1904000>;
144 regulator-max-microvolt = <2040000>;
147 regulator-min-microvolt = <900000>;
148 regulator-max-microvolt = <1028000>;
151 regulator-min-microvolt = <880000>;
152 regulator-max-microvolt = <880000>;
153 regulator-allow-set-load;
156 regulator-min-microvolt = <1200000>;
157 regulator-max-microvolt = <1200000>;
158 regulator-allow-set-load;
161 regulator-min-microvolt = <1000000>;
162 regulator-max-microvolt = <1000000>;
165 regulator-min-microvolt = <800000>;
166 regulator-max-microvolt = <800000>;
169 regulator-min-microvolt = <1808000>;
170 regulator-max-microvolt = <1808000>;
173 regulator-min-microvolt = <1800000>;
174 regulator-max-microvolt = <1800000>;
175 regulator-allow-set-load;
178 regulator-min-microvolt = <1200000>;
179 regulator-max-microvolt = <1200000>;
182 regulator-min-microvolt = <1808000>;
183 regulator-max-microvolt = <2960000>;
186 regulator-min-microvolt = <1808000>;
187 regulator-max-microvolt = <2960000>;
190 regulator-min-microvolt = <1000000>;
191 regulator-max-microvolt = <1000000>;
194 regulator-min-microvolt = <1800000>;
195 regulator-max-microvolt = <1800000>;
198 regulator-min-microvolt = <1808000>;
199 regulator-max-microvolt = <2960000>;
202 regulator-min-microvolt = <1880000>;
203 regulator-max-microvolt = <1880000>;
206 regulator-min-microvolt = <1800000>;
207 regulator-max-microvolt = <1800000>;
210 regulator-min-microvolt = <2704000>;
211 regulator-max-microvolt = <2704000>;
214 regulator-min-microvolt = <1304000>;
215 regulator-max-microvolt = <1304000>;
216 regulator-allow-set-load;
219 regulator-min-microvolt = <2704000>;
220 regulator-max-microvolt = <2704000>;
223 regulator-min-microvolt = <3008000>;
224 regulator-max-microvolt = <3008000>;
227 regulator-min-microvolt = <2960000>;
228 regulator-max-microvolt = <2960000>;
229 regulator-allow-set-load;
232 regulator-min-microvolt = <2960000>;
233 regulator-max-microvolt = <2960000>;
234 regulator-allow-set-load;
235 regulator-system-load = <800000>;
238 regulator-min-microvolt = <2864000>;
239 regulator-max-microvolt = <2864000>;
242 regulator-min-microvolt = <3312000>;
243 regulator-max-microvolt = <3312000>;
246 regulator-min-microvolt = <3088000>;
247 regulator-max-microvolt = <3088000>;
250 regulator-min-microvolt = <3104000>;
251 regulator-max-microvolt = <3312000>;
252 regulator-allow-set-load;
255 regulator-min-microvolt = <1200000>;
256 regulator-max-microvolt = <1200000>;
259 regulator-min-microvolt = <3008000>;
260 regulator-max-microvolt = <3008000>;
264 regulator-min-microvolt = <1800000>;
265 regulator-max-microvolt = <1800000>;
269 regulator-min-microvolt = <1800000>;
270 regulator-max-microvolt = <1800000>;
277 gpio-reserved-ranges = <0 4>, <81 4>;
282 bias-pull-up; /* pull up */
290 vmmc-supply = <&vreg_l21a_2p95>;
291 vqmmc-supply = <&vreg_l13a_2p95>;
293 pinctrl-names = "default", "sleep";
294 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
295 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
303 dr_mode = "host"; /* Force to host until we have Type-C hooked up */
309 vdda-phy-supply = <&vreg_l1a_0p875>;
310 vdda-pll-supply = <&vreg_l2a_1p2>;
316 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
317 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
318 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
319 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
322 /* PINCTRL - board-specific pinctrl */
325 /delete-property/ bias-disable;
327 * Configure a pull-up on 45 (RX). This is needed to
329 * module is in tri-state (module powered off or not
332 bias-pull-up;
336 /delete-property/ bias-disable;
338 * Configure a pull-down on 47 (CTS) to match the pull
341 bias-pull-down;