Lines Matching +full:push +full:- +full:pull
1 // SPDX-License-Identifier: GPL-2.0
4 #include <dt-bindings/mfd/max77620.h>
8 compatible = "nvidia,p3668-0000", "nvidia,tegra194";
28 stdout-path = "serial0:115200n8";
35 phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
36 phy-handle = <&phy>;
37 phy-mode = "rgmii-id";
40 #address-cells = <1>;
41 #size-cells = <0>;
44 compatible = "ethernet-phy-ieee802.3-c22";
46 interrupt-parent = <&gpio>;
48 #phy-cells = <0>;
53 memory-controller@2c00000 {
69 vcc-supply = <&vdd_1v8ls>;
70 address-width = <8>;
73 read-only;
80 bus-width = <4>;
81 cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
82 disable-wp;
83 vmmc-supply = <&vdd_3v3_sd>;
87 avdd-usb-supply = <&vdd_usb_3v3>;
88 vclamp-usb-supply = <&vdd_1v8ao>;
91 usb2-1 {
92 vbus-supply = <&vdd_5v0_sys>;
95 usb2-3 {
96 vbus-supply = <&vdd_5v0_sys>;
99 usb3-0 {
100 vbus-supply = <&vdd_5v0_sys>;
103 usb3-3 {
104 vbus-supply = <&vdd_5v0_sys>;
114 nvidia,invert-interrupt;
126 interrupt-parent = <&pmc>;
128 #interrupt-cells = <2>;
129 interrupt-controller;
131 #gpio-cells = <2>;
132 gpio-controller;
134 pinctrl-names = "default";
135 pinctrl-0 = <&max20024_default>;
145 function = "fps-out";
146 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
151 function = "fps-out";
152 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
157 function = "fps-out";
158 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
163 function = "32k-out1";
164 drive-push-pull = <1>;
170 drive-push-pull = <1>;
176 drive-push-pull = <0>;
182 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
183 maxim,shutdown-fps-time-period-us = <640>;
187 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
188 maxim,shutdown-fps-time-period-us = <640>;
189 maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
193 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
194 maxim,shutdown-fps-time-period-us = <640>;
199 in-sd0-supply = <&vdd_5v0_sys>;
200 in-sd1-supply = <&vdd_5v0_sys>;
201 in-sd2-supply = <&vdd_5v0_sys>;
202 in-sd3-supply = <&vdd_5v0_sys>;
203 in-sd4-supply = <&vdd_5v0_sys>;
205 in-ldo0-1-supply = <&vdd_5v0_sys>;
206 in-ldo2-supply = <&vdd_5v0_sys>;
207 in-ldo3-5-supply = <&vdd_5v0_sys>;
208 in-ldo4-6-supply = <&vdd_5v0_sys>;
209 in-ldo7-8-supply = <&vdd_1v8ls>;
212 regulator-name = "VDDIO_SYS_1V0";
213 regulator-min-microvolt = <1000000>;
214 regulator-max-microvolt = <1000000>;
215 regulator-always-on;
216 regulator-boot-on;
220 regulator-name = "VDDIO_SYS_1V8HS";
221 regulator-min-microvolt = <1800000>;
222 regulator-max-microvolt = <1800000>;
223 regulator-always-on;
224 regulator-boot-on;
228 regulator-name = "VDDIO_SYS_1V8LS";
229 regulator-min-microvolt = <1800000>;
230 regulator-max-microvolt = <1800000>;
231 regulator-always-on;
232 regulator-boot-on;
236 regulator-name = "VDDIO_AO_1V8";
237 regulator-min-microvolt = <1800000>;
238 regulator-max-microvolt = <1800000>;
239 regulator-always-on;
240 regulator-boot-on;
244 regulator-name = "VDD_DDR_1V1";
245 regulator-min-microvolt = <1100000>;
246 regulator-max-microvolt = <1100000>;
247 regulator-always-on;
248 regulator-boot-on;
252 regulator-name = "VDD_RTC";
253 regulator-min-microvolt = <800000>;
254 regulator-max-microvolt = <800000>;
255 regulator-always-on;
256 regulator-boot-on;
260 regulator-name = "VDDIO_AO_3V3";
261 regulator-min-microvolt = <3300000>;
262 regulator-max-microvolt = <3300000>;
263 regulator-always-on;
264 regulator-boot-on;
268 regulator-name = "VDD_EMMC_3V3";
269 regulator-min-microvolt = <3300000>;
270 regulator-max-microvolt = <3300000>;
274 regulator-name = "VDD_USB_3V3";
275 regulator-min-microvolt = <3300000>;
276 regulator-max-microvolt = <3300000>;
277 regulator-always-on;
278 regulator-boot-on;
282 regulator-name = "VDD_SDIO_3V3";
283 regulator-min-microvolt = <3300000>;
284 regulator-max-microvolt = <3300000>;
288 regulator-name = "AVDD_CSI_1V2";
289 regulator-min-microvolt = <1200000>;
290 regulator-max-microvolt = <1200000>;
298 compatible = "regulator-fixed";
299 regulator-name = "VDD_3V3_SD";
300 regulator-min-microvolt = <3300000>;
301 regulator-max-microvolt = <3300000>;
303 regulator-boot-on;
304 enable-active-high;