Lines Matching +full:gpio +full:- +full:regulator
1 // SPDX-License-Identifier: GPL-2.0
4 #include <dt-bindings/mfd/max77620.h>
27 stdout-path = "serial0:115200n8";
34 phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
35 phy-handle = <&phy>;
36 phy-mode = "rgmii-id";
39 #address-cells = <1>;
40 #size-cells = <0>;
43 compatible = "ethernet-phy-ieee802.3-c22";
45 interrupt-parent = <&gpio>;
47 #phy-cells = <0>;
52 memory-controller@2c00000 {
68 vcc-supply = <&vdd_1v8ls>;
69 address-width = <8>;
72 read-only;
78 cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
84 bus-width = <8>;
85 non-removable;
87 vqmmc-supply = <&vdd_1v8ls>;
88 vmmc-supply = <&vdd_emmc_3v3>;
92 avdd-usb-supply = <&vdd_usb_3v3>;
93 vclamp-usb-supply = <&vdd_1v8ao>;
96 usb2-1 {
97 vbus-supply = <&vdd_5v0_sys>;
100 usb2-3 {
101 vbus-supply = <&vdd_5v_sata>;
104 usb3-0 {
105 vbus-supply = <&vdd_5v0_sys>;
108 usb3-3 {
109 vbus-supply = <&vdd_5v0_sys>;
119 nvidia,invert-interrupt;
131 interrupt-parent = <&pmc>;
133 #interrupt-cells = <2>;
134 interrupt-controller;
136 #gpio-cells = <2>;
137 gpio-controller;
139 pinctrl-names = "default";
140 pinctrl-0 = <&max20024_default>;
145 function = "gpio";
150 function = "fps-out";
151 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
156 function = "fps-out";
157 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
162 function = "fps-out";
163 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
168 function = "32k-out1";
169 drive-push-pull = <1>;
174 function = "gpio";
175 drive-push-pull = <1>;
180 function = "gpio";
181 drive-push-pull = <0>;
187 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
188 maxim,shutdown-fps-time-period-us = <640>;
192 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
193 maxim,shutdown-fps-time-period-us = <640>;
194 maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
198 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
199 maxim,shutdown-fps-time-period-us = <640>;
204 in-sd0-supply = <&vdd_5v0_sys>;
205 in-sd1-supply = <&vdd_5v0_sys>;
206 in-sd2-supply = <&vdd_5v0_sys>;
207 in-sd3-supply = <&vdd_5v0_sys>;
208 in-sd4-supply = <&vdd_5v0_sys>;
210 in-ldo0-1-supply = <&vdd_5v0_sys>;
211 in-ldo2-supply = <&vdd_5v0_sys>;
212 in-ldo3-5-supply = <&vdd_5v0_sys>;
213 in-ldo4-6-supply = <&vdd_5v0_sys>;
214 in-ldo7-8-supply = <&vdd_1v8ls>;
217 regulator-name = "VDDIO_SYS_1V0";
218 regulator-min-microvolt = <1000000>;
219 regulator-max-microvolt = <1000000>;
220 regulator-always-on;
221 regulator-boot-on;
225 regulator-name = "VDDIO_SYS_1V8HS";
226 regulator-min-microvolt = <1800000>;
227 regulator-max-microvolt = <1800000>;
228 regulator-always-on;
229 regulator-boot-on;
233 regulator-name = "VDDIO_SYS_1V8LS";
234 regulator-min-microvolt = <1800000>;
235 regulator-max-microvolt = <1800000>;
236 regulator-always-on;
237 regulator-boot-on;
241 regulator-name = "VDDIO_AO_1V8";
242 regulator-min-microvolt = <1800000>;
243 regulator-max-microvolt = <1800000>;
244 regulator-always-on;
245 regulator-boot-on;
249 regulator-name = "VDD_DDR_1V1";
250 regulator-min-microvolt = <1100000>;
251 regulator-max-microvolt = <1100000>;
252 regulator-always-on;
253 regulator-boot-on;
257 regulator-name = "VDD_RTC";
258 regulator-min-microvolt = <800000>;
259 regulator-max-microvolt = <800000>;
260 regulator-always-on;
261 regulator-boot-on;
265 regulator-name = "VDDIO_AO_3V3";
266 regulator-min-microvolt = <3300000>;
267 regulator-max-microvolt = <3300000>;
268 regulator-always-on;
269 regulator-boot-on;
273 regulator-name = "VDD_EMMC_3V3";
274 regulator-min-microvolt = <3300000>;
275 regulator-max-microvolt = <3300000>;
279 regulator-name = "VDD_USB_3V3";
280 regulator-min-microvolt = <3300000>;
281 regulator-max-microvolt = <3300000>;
285 regulator-name = "VDD_SDIO_3V3";
286 regulator-min-microvolt = <3300000>;
287 regulator-max-microvolt = <3300000>;
291 regulator-name = "AVDD_CSI_1V2";
292 regulator-min-microvolt = <1200000>;
293 regulator-max-microvolt = <1200000>;
298 temperature-sensor@4c {
302 interrupt-parent = <&gpio>;
305 vcc-supply = <&vdd_1v8ls>;
307 #thermal-sensor-cells = <1>;
312 vdd_5v0_sys: regulator@0 {
313 compatible = "regulator-fixed";
314 regulator-name = "VIN_SYS_5V0";
315 regulator-min-microvolt = <5000000>;
316 regulator-max-microvolt = <5000000>;
317 regulator-always-on;
318 regulator-boot-on;
321 vdd_hdmi: regulator@1 {
322 compatible = "regulator-fixed";
323 regulator-name = "VDD_5V0_HDMI_CON";
324 regulator-min-microvolt = <5000000>;
325 regulator-max-microvolt = <5000000>;
326 gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
327 enable-active-high;
330 vdd_3v3_pcie: regulator@2 {
331 compatible = "regulator-fixed";
332 regulator-name = "PEX_3V3";
333 regulator-min-microvolt = <3300000>;
334 regulator-max-microvolt = <3300000>;
335 gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
336 regulator-boot-on;
337 enable-active-high;
340 vdd_12v_pcie: regulator@3 {
341 compatible = "regulator-fixed";
342 regulator-name = "VDD_12V";
343 regulator-min-microvolt = <1200000>;
344 regulator-max-microvolt = <1200000>;
345 gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
346 regulator-boot-on;
349 vdd_5v_sata: regulator@4 {
350 compatible = "regulator-fixed";
351 regulator-name = "VDD_5V_SATA";
352 regulator-min-microvolt = <5000000>;
353 regulator-max-microvolt = <5000000>;
354 gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
355 enable-active-high;