Lines Matching +full:usb +full:- +full:bias
1 // SPDX-License-Identifier: GPL-2.0
7 #include <dt-bindings/gpio/gpio.h>
16 stdout-path = "serial0:921600n8";
21 compatible = "linaro,optee-tz";
26 gpio-keys {
27 compatible = "gpio-keys";
28 input-name = "gpio-keys";
29 pinctrl-names = "default";
30 pinctrl-0 = <&gpio_keys_default>;
32 volume-up {
36 wakeup-source;
37 debounce-interval = <15>;
40 volume-down {
44 wakeup-source;
45 debounce-interval = <15>;
51 clock-div = <2>;
52 pinctrl-names = "default";
53 pinctrl-0 = <&i2c0_pins_a>;
59 reset-gpios = <&pio 65 GPIO_ACTIVE_HIGH>;
60 pinctrl-names = "default";
61 pinctrl-0 = <&tca6416_pins>;
63 gpio-controller;
64 #gpio-cells = <2>;
67 gpio-hog;
70 line-name = "eint20_mux_sel0";
74 gpio-hog;
77 line-name = "expcon_mux_sel1";
81 gpio-hog;
84 line-name = "mrg_di_mux_sel2";
88 gpio-hog;
91 line-name = "sd_sdio_mux_sel3";
95 gpio-hog;
97 output-low;
98 line-name = "sd_sdio_mux_ctrl7";
102 gpio-hog;
105 line-name = "hw_id0";
109 gpio-hog;
112 line-name = "hw_id1";
116 gpio-hog;
119 line-name = "hw_id2";
123 gpio-hog;
126 line-name = "fg_int_n";
130 gpio-hog;
132 output-high;
133 line-name = "usba_pwr_en";
137 gpio-hog;
140 line-name = "wifi_3v3_pg";
144 gpio-hog;
146 output-low;
147 line-name = "cam_rst";
151 gpio-hog;
153 output-low;
154 line-name = "cam_pwdn";
160 clock-div = <2>;
161 pinctrl-names = "default";
162 pinctrl-0 = <&i2c2_pins_a>;
171 pinctrl-names = "default";
172 pinctrl-0 = <ðernet_pins_default>;
173 phy-handle = <ð_phy>;
174 phy-mode = "rmii";
175 mac-address = [00 00 00 00 00 00];
179 #address-cells = <1>;
180 #size-cells = <0>;
182 eth_phy: ethernet-phy@0 {
193 compatible = "usb-c-connector";
194 label = "USB-C";
207 bias-pull-up;
208 input-enable;
216 bias-disable;
224 bias-disable;
231 output-high;
236 input-enable;
237 bias-pull-up;