Lines Matching +full:aiu +full:- +full:gxl
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/sound/meson-aiu.h>
13 #include "meson-gxl-s905x.dtsi"
16 compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x",
17 "amlogic,meson-gxl";
18 model = "Libre Computer AML-S905X-CC V2";
27 stdout-path = "serial0:115200n8";
30 emmc_pwrseq: emmc-pwrseq {
31 compatible = "mmc-pwrseq-emmc";
32 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
35 hdmi-connector {
36 compatible = "hdmi-connector";
41 remote-endpoint = <&hdmi_tx_tmds_out>;
47 compatible = "gpio-leds";
49 led-blue {
53 linux,default-trigger = "heartbeat";
54 panic-indicator;
57 led-green {
61 linux,default-trigger = "disk-activity";
70 ao_5v: regulator-ao_5v {
71 compatible = "regulator-fixed";
72 regulator-name = "AO_5V";
73 regulator-min-microvolt = <5000000>;
74 regulator-max-microvolt = <5000000>;
75 vin-supply = <&dc_in>;
76 regulator-always-on;
79 dc_in: regulator-dc_in {
80 compatible = "regulator-fixed";
81 regulator-name = "DC_IN";
82 regulator-min-microvolt = <5000000>;
83 regulator-max-microvolt = <5000000>;
84 regulator-always-on;
88 vcck: regulator-vcck {
89 compatible = "regulator-fixed";
90 regulator-name = "VCCK";
91 regulator-min-microvolt = <3300000>;
92 regulator-max-microvolt = <3300000>;
93 vin-supply = <&ao_5v>;
94 regulator-always-on;
97 vcc_card: regulator-vcc_card {
98 compatible = "regulator-fixed";
99 regulator-name = "VCC_CARD";
100 regulator-min-microvolt = <3300000>;
101 regulator-max-microvolt = <3300000>;
102 vin-supply = <&vddio_ao3v3>;
105 enable-active-high;
108 vcc5v: regulator-vcc5v {
109 compatible = "regulator-fixed";
110 regulator-name = "VCC5V";
111 regulator-min-microvolt = <5000000>;
112 regulator-max-microvolt = <5000000>;
113 vin-supply = <&ao_5v>;
118 vddio_ao3v3: regulator-vddio_ao3v3 {
119 compatible = "regulator-fixed";
120 regulator-name = "VDDIO_AO3V3";
121 regulator-min-microvolt = <3300000>;
122 regulator-max-microvolt = <3300000>;
123 vin-supply = <&ao_5v>;
124 regulator-always-on;
128 vddio_card: regulator-vddio-card {
129 compatible = "regulator-gpio";
130 regulator-name = "VDDIO_CARD";
131 regulator-min-microvolt = <1800000>;
132 regulator-max-microvolt = <3300000>;
135 gpios-states = <0>;
140 regulator-settling-time-up-us = <200>;
141 regulator-settling-time-down-us = <50000>;
144 vddio_ao18: regulator-vddio_ao18 {
145 compatible = "regulator-fixed";
146 regulator-name = "VDDIO_AO18";
147 regulator-min-microvolt = <1800000>;
148 regulator-max-microvolt = <1800000>;
149 vin-supply = <&vddio_ao3v3>;
150 regulator-always-on;
153 vcc_1v8: regulator-vcc_1v8 {
154 compatible = "regulator-fixed";
155 regulator-name = "VCC 1V8";
156 regulator-min-microvolt = <1800000>;
157 regulator-max-microvolt = <1800000>;
158 vin-supply = <&vddio_ao3v3>;
159 regulator-always-on;
163 compatible = "amlogic,gx-sound-card";
164 model = "GXL-LIBRETECH-S905X-CC-V2";
165 assigned-clocks = <&clkc CLKID_MPLL0>,
168 assigned-clock-parents = <0>, <0>, <0>;
169 assigned-clock-rates = <294912000>,
174 dai-link-0 {
175 sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
178 dai-link-1 {
179 sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
180 dai-format = "i2s";
181 mclk-fs = <256>;
183 codec-0 {
184 sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
188 dai-link-2 {
189 sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
191 codec-0 {
192 sound-dai = <&hdmi_tx>;
199 &aiu {
205 pinctrl-0 = <&ao_cec_pins>;
206 pinctrl-names = "default";
207 hdmi-phandle = <&hdmi_tx>;
216 pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
217 pinctrl-names = "default";
222 pinctrl-0 = <&remote_input_ao_pins>;
223 pinctrl-names = "default";
228 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
229 hdmi-supply = <&vcc5v>;
230 pinctrl-names = "default";
235 remote-endpoint = <&hdmi_connector_in>;
241 vref-supply = <&vddio_ao18>;
246 pinctrl-0 = <&sdcard_pins>;
247 pinctrl-1 = <&sdcard_clk_gate_pins>;
248 pinctrl-names = "default", "clk-gate";
250 bus-width = <4>;
251 cap-sd-highspeed;
252 sd-uhs-sdr12;
253 sd-uhs-sdr25;
254 sd-uhs-sdr50;
255 sd-uhs-ddr50;
256 max-frequency = <100000000>;
257 disable-wp;
259 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
261 vmmc-supply = <&vcc_card>;
262 vqmmc-supply = <&vddio_card>;
269 pinctrl-0 = <&emmc_pins>;
270 pinctrl-1 = <&emmc_clk_gate_pins>;
271 pinctrl-names = "default", "clk-gate";
273 bus-width = <8>;
274 cap-mmc-highspeed;
275 mmc-hs200-1_8v;
276 max-frequency = <200000000>;
277 disable-wp;
279 mmc-pwrseq = <&emmc_pwrseq>;
280 vmmc-supply = <&vddio_ao3v3>;
281 vqmmc-supply = <&vcc_1v8>;
288 pinctrl-0 = <&nor_pins>;
289 pinctrl-names = "default";
291 nor_4u1: spi-flash@0 {
292 #address-cells = <1>;
293 #size-cells = <1>;
294 compatible = "jedec,spi-nor";
296 spi-max-frequency = <3000000>;
302 pinctrl-0 = <&uart_ao_a_pins>;
303 pinctrl-names = "default";
312 pinctrl-names = "default";
313 phy-supply = <&vcc5v>;
317 phy-supply = <&vcc5v>;