Lines Matching +full:reset +full:- +full:assert +full:- +full:us
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include "meson-gxbb.dtsi"
17 stdout-path = "serial0:115200n8";
26 compatible = "gpio-leds";
28 led-system {
29 label = "wetek-play:system-status";
31 default-state = "on";
32 panic-indicator;
36 usb_pwr: regulator-usb-pwrs {
37 compatible = "regulator-fixed";
39 regulator-name = "USB_PWR";
41 regulator-min-microvolt = <5000000>;
42 regulator-max-microvolt = <5000000>;
45 enable-active-high;
48 vddio_boot: regulator-vddio_boot {
49 compatible = "regulator-fixed";
50 regulator-name = "VDDIO_BOOT";
51 regulator-min-microvolt = <1800000>;
52 regulator-max-microvolt = <1800000>;
55 vddao_3v3: regulator-vddao_3v3 {
56 compatible = "regulator-fixed";
57 regulator-name = "VDDAO_3V3";
58 regulator-min-microvolt = <3300000>;
59 regulator-max-microvolt = <3300000>;
62 vddio_ao18: regulator-vddio_ao18 {
63 compatible = "regulator-fixed";
64 regulator-name = "VDDIO_AO18";
65 regulator-min-microvolt = <1800000>;
66 regulator-max-microvolt = <1800000>;
69 vcc_3v3: regulator-vcc_3v3 {
70 compatible = "regulator-fixed";
71 regulator-name = "VCC_3V3";
72 regulator-min-microvolt = <3300000>;
73 regulator-max-microvolt = <3300000>;
76 emmc_pwrseq: emmc-pwrseq {
77 compatible = "mmc-pwrseq-emmc";
78 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
82 compatible = "pwm-clock";
83 #clock-cells = <0>;
84 clock-frequency = <32768>;
88 sdio_pwrseq: sdio-pwrseq {
89 compatible = "mmc-pwrseq-simple";
90 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
92 clock-names = "ext_clock";
95 cvbs-connector {
96 compatible = "composite-video-connector";
100 remote-endpoint = <&cvbs_vdac_out>;
105 hdmi-connector {
106 compatible = "hdmi-connector";
111 remote-endpoint = <&hdmi_tx_tmds_out>;
119 pinctrl-0 = <&ao_cec_pins>;
120 pinctrl-names = "default";
121 hdmi-phandle = <&hdmi_tx>;
126 remote-endpoint = <&cvbs_connector_in>;
132 pinctrl-0 = <ð_rgmii_pins>;
133 pinctrl-names = "default";
135 phy-handle = <ð_phy0>;
136 phy-mode = "rgmii";
138 amlogic,tx-delay-ns = <2>;
141 compatible = "snps,dwmac-mdio";
142 #address-cells = <1>;
143 #size-cells = <0>;
145 eth_phy0: ethernet-phy@0 {
149 reset-assert-us = <10000>;
150 reset-deassert-us = <30000>;
151 reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
153 interrupt-parent = <&gpio_intc>;
162 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
163 pinctrl-names = "default";
168 remote-endpoint = <&hdmi_connector_in>;
174 pinctrl-0 = <&remote_input_ao_pins>;
175 pinctrl-names = "default";
180 pinctrl-0 = <&pwm_e_pins>;
181 pinctrl-names = "default";
183 clock-names = "clkin0";
188 vref-supply = <&vddio_ao18>;
194 pinctrl-0 = <&sdio_pins>;
195 pinctrl-1 = <&sdio_clk_gate_pins>;
196 pinctrl-names = "default", "clk-gate";
197 #address-cells = <1>;
198 #size-cells = <0>;
200 bus-width = <4>;
201 cap-sd-highspeed;
202 max-frequency = <50000000>;
204 non-removable;
205 disable-wp;
208 keep-power-in-suspend;
210 mmc-pwrseq = <&sdio_pwrseq>;
212 vmmc-supply = <&vddao_3v3>;
213 vqmmc-supply = <&vddio_boot>;
217 compatible = "brcm,bcm4329-fmac";
224 pinctrl-0 = <&sdcard_pins>;
225 pinctrl-1 = <&sdcard_clk_gate_pins>;
226 pinctrl-names = "default", "clk-gate";
228 bus-width = <4>;
229 cap-sd-highspeed;
230 max-frequency = <50000000>;
231 disable-wp;
233 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
235 vmmc-supply = <&vddao_3v3>;
236 vqmmc-supply = <&vcc_3v3>;
242 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
243 pinctrl-1 = <&emmc_clk_gate_pins>;
244 pinctrl-names = "default", "clk-gate";
246 bus-width = <8>;
247 cap-mmc-highspeed;
248 max-frequency = <200000000>;
249 non-removable;
250 disable-wp;
251 mmc-ddr-1_8v;
252 mmc-hs200-1_8v;
254 mmc-pwrseq = <&emmc_pwrseq>;
255 vmmc-supply = <&vcc_3v3>;
256 vqmmc-supply = <&vddio_boot>;
262 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
263 pinctrl-names = "default";
264 uart-has-rtscts;
267 compatible = "brcm,bcm43438-bt";
268 shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
275 pinctrl-0 = <&uart_ao_a_pins>;
276 pinctrl-names = "default";
281 phy-supply = <&usb_pwr>;