Lines Matching +full:sda +full:- +full:gpios
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-gxbb.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
12 compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
21 stdout-path = "serial0:115200n8";
30 compatible = "gpio-leds";
32 led-stat {
33 label = "nanopi-k2:blue:stat";
34 gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
35 default-state = "on";
36 panic-indicator;
40 vdd_5v: regulator-vdd-5v {
41 compatible = "regulator-fixed";
42 regulator-name = "VDD_5V";
43 regulator-min-microvolt = <5000000>;
44 regulator-max-microvolt = <5000000>;
47 vddio_ao18: regulator-vddio-ao18 {
48 compatible = "regulator-fixed";
49 regulator-name = "VDDIO_AO18";
50 regulator-min-microvolt = <1800000>;
51 regulator-max-microvolt = <1800000>;
54 vddio_ao3v3: regulator-vddio-ao3v3 {
55 compatible = "regulator-fixed";
56 regulator-name = "VDDIO_AO3.3V";
57 regulator-min-microvolt = <3300000>;
58 regulator-max-microvolt = <3300000>;
61 vddio_tf: regulator-vddio-tf {
62 compatible = "regulator-gpio";
64 regulator-name = "VDDIO_TF";
65 regulator-min-microvolt = <1800000>;
66 regulator-max-microvolt = <3300000>;
68 gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
69 gpios-states = <0>;
74 regulator-settling-time-up-us = <100>;
75 regulator-settling-time-down-us = <5000>;
78 wifi_32k: wifi-32k {
79 compatible = "pwm-clock";
80 #clock-cells = <0>;
81 clock-frequency = <32768>;
85 sdio_pwrseq: sdio-pwrseq {
86 compatible = "mmc-pwrseq-simple";
87 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
89 clock-names = "ext_clock";
92 vcc1v8: regulator-vcc1v8 {
93 compatible = "regulator-fixed";
94 regulator-name = "VCC1.8V";
95 regulator-min-microvolt = <1800000>;
96 regulator-max-microvolt = <1800000>;
99 vcc3v3: regulator-vcc3v3 {
100 compatible = "regulator-fixed";
101 regulator-name = "VCC3.3V";
102 regulator-min-microvolt = <3300000>;
103 regulator-max-microvolt = <3300000>;
106 emmc_pwrseq: emmc-pwrseq {
107 compatible = "mmc-pwrseq-emmc";
108 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
112 cvbs-connector {
113 compatible = "composite-video-connector";
118 remote-endpoint = <&cvbs_vdac_out>;
123 hdmi-connector {
124 compatible = "hdmi-connector";
129 remote-endpoint = <&hdmi_tx_tmds_out>;
137 pinctrl-0 = <&ao_cec_pins>;
138 pinctrl-names = "default";
139 hdmi-phandle = <&hdmi_tx>;
144 remote-endpoint = <&cvbs_connector_in>;
150 pinctrl-0 = <ð_rgmii_pins>;
151 pinctrl-names = "default";
153 phy-handle = <ð_phy0>;
154 phy-mode = "rgmii";
156 amlogic,tx-delay-ns = <2>;
159 compatible = "snps,dwmac-mdio";
160 #address-cells = <1>;
161 #size-cells = <0>;
163 eth_phy0: ethernet-phy@0 {
167 reset-assert-us = <10000>;
168 reset-deassert-us = <30000>;
169 reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
171 interrupt-parent = <&gpio_intc>;
180 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
181 pinctrl-names = "default";
186 remote-endpoint = <&hdmi_connector_in>;
192 pinctrl-0 = <&remote_input_ao_pins>;
193 pinctrl-names = "default";
197 gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
207 gpio-line-names = /* Bank GPIOZ */
214 "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL",
228 "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK",
256 pinctrl-0 = <&pwm_e_pins>;
257 pinctrl-names = "default";
259 clock-names = "clkin0";
264 vref-supply = <&vddio_ao18>;
270 pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
271 pinctrl-1 = <&sdio_clk_gate_pins>;
272 pinctrl-names = "default", "clk-gate";
273 #address-cells = <1>;
274 #size-cells = <0>;
276 bus-width = <4>;
277 cap-sd-highspeed;
278 max-frequency = <50000000>;
280 non-removable;
281 disable-wp;
284 keep-power-in-suspend;
286 mmc-pwrseq = <&sdio_pwrseq>;
288 vmmc-supply = <&vddio_ao3v3>;
289 vqmmc-supply = <&vddio_ao18>;
292 compatible = "brcm,bcm4329-fmac";
300 pinctrl-0 = <&sdcard_pins>;
301 pinctrl-1 = <&sdcard_clk_gate_pins>;
302 pinctrl-names = "default", "clk-gate";
304 bus-width = <4>;
305 cap-sd-highspeed;
306 sd-uhs-sdr12;
307 sd-uhs-sdr25;
308 sd-uhs-sdr50;
309 sd-uhs-ddr50;
310 max-frequency = <100000000>;
311 disable-wp;
313 cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
315 vmmc-supply = <&vddio_ao3v3>;
316 vqmmc-supply = <&vddio_tf>;
322 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
323 pinctrl-1 = <&emmc_clk_gate_pins>;
324 pinctrl-names = "default", "clk-gate";
326 bus-width = <8>;
327 max-frequency = <200000000>;
328 non-removable;
329 disable-wp;
330 cap-mmc-highspeed;
331 mmc-ddr-1_8v;
332 mmc-hs200-1_8v;
334 mmc-pwrseq = <&emmc_pwrseq>;
335 vmmc-supply = <&vcc3v3>;
336 vqmmc-supply = <&vcc1v8>;
342 pinctrl-0 = <&uart_ao_a_pins>;
343 pinctrl-names = "default";
349 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
350 pinctrl-names = "default";
353 /* 40-pin CON1 */
356 pinctrl-0 = <&uart_c_pins>;
357 pinctrl-names = "default";
362 phy-supply = <&vdd_5v>;