Lines Matching +full:usb +full:- +full:bias
1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2011 - 2014 Xilinx
6 /dts-v1/;
7 #include "zynq-7000.dtsi"
11 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
27 stdout-path = "serial0:115200n8";
30 gpio-keys {
31 compatible = "gpio-keys";
37 wakeup-source;
44 wakeup-source;
50 compatible = "gpio-leds";
55 linux,default-trigger = "heartbeat";
60 compatible = "usb-nop-xceiv";
61 #phy-cells = <0>;
67 compatible = "mmio-sram";
74 pinctrl-names = "default";
75 pinctrl-0 = <&pinctrl_can0_default>;
79 ps-clk-frequency = <33333333>;
84 phy-mode = "rgmii-id";
85 phy-handle = <ðernet_phy>;
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_gem0_default>;
89 ethernet_phy: ethernet-phy@7 {
91 device_type = "ethernet-phy";
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_gpio0_default>;
102 clock-frequency = <400000>;
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_i2c0_default>;
106 i2c-mux@74 {
108 #address-cells = <1>;
109 #size-cells = <0>;
113 #address-cells = <1>;
114 #size-cells = <0>;
116 si570: clock-generator@5d {
117 #clock-cells = <0>;
119 temperature-stability = <50>;
121 factory-fout = <156250000>;
122 clock-frequency = <148500000>;
127 #address-cells = <1>;
128 #size-cells = <0>;
130 adv7511: hdmi-tx@39 {
133 adi,input-depth = <8>;
134 adi,input-colorspace = "yuv422";
135 adi,input-clock = "1x";
136 adi,input-style = <3>;
137 adi,input-justification = "right";
142 #address-cells = <1>;
143 #size-cells = <0>;
152 #address-cells = <1>;
153 #size-cells = <0>;
158 gpio-controller;
159 #gpio-cells = <2>;
164 #address-cells = <1>;
165 #size-cells = <0>;
174 #address-cells = <1>;
175 #size-cells = <0>;
194 pinctrl_can0_default: can0-default {
202 slew-rate = <0>;
203 io-standard = <1>;
206 conf-rx {
208 bias-high-impedance;
211 conf-tx {
213 bias-disable;
217 pinctrl_gem0_default: gem0-default {
225 slew-rate = <0>;
226 io-standard = <4>;
229 conf-rx {
231 bias-high-impedance;
232 low-power-disable;
235 conf-tx {
237 bias-disable;
238 low-power-enable;
241 mux-mdio {
246 conf-mdio {
248 slew-rate = <0>;
249 io-standard = <1>;
250 bias-disable;
254 pinctrl_gpio0_default: gpio0-default {
266 slew-rate = <0>;
267 io-standard = <1>;
270 conf-pull-up {
272 bias-pull-up;
275 conf-pull-none {
277 bias-disable;
281 pinctrl_i2c0_default: i2c0-default {
289 bias-pull-up;
290 slew-rate = <0>;
291 io-standard = <1>;
295 pinctrl_sdhci0_default: sdhci0-default {
303 slew-rate = <0>;
304 io-standard = <1>;
305 bias-disable;
308 mux-cd {
313 conf-cd {
315 bias-high-impedance;
316 bias-pull-up;
317 slew-rate = <0>;
318 io-standard = <1>;
321 mux-wp {
326 conf-wp {
328 bias-high-impedance;
329 bias-pull-up;
330 slew-rate = <0>;
331 io-standard = <1>;
335 pinctrl_uart1_default: uart1-default {
343 slew-rate = <0>;
344 io-standard = <1>;
347 conf-rx {
349 bias-high-impedance;
352 conf-tx {
354 bias-disable;
358 pinctrl_usb0_default: usb0-default {
366 slew-rate = <0>;
367 io-standard = <1>;
370 conf-rx {
372 bias-high-impedance;
375 conf-tx {
378 bias-disable;
385 pinctrl-names = "default";
386 pinctrl-0 = <&pinctrl_sdhci0_default>;
391 pinctrl-names = "default";
392 pinctrl-0 = <&pinctrl_uart1_default>;
398 usb-phy = <&usb_phy0>;
399 pinctrl-names = "default";
400 pinctrl-0 = <&pinctrl_usb0_default>;