Lines Matching +full:sun7i +full:- +full:a20 +full:- +full:can
2 * Copyright 2015-2020 Adam Sampson <ats@offog.org>
4 * This file is dual-licensed: you can use it either under the terms
9 * a) This file is free software; you can redistribute it and/or
43 /dts-v1/;
44 #include "sun7i-a20.dtsi"
45 #include "sunxi-common-regulators.dtsi"
46 #include <dt-bindings/gpio/gpio.h>
47 #include <dt-bindings/interrupt-controller/arm-gic.h>
51 compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
58 stdout-path = "serial0:115200n8";
61 hdmi-connector {
62 compatible = "hdmi-connector";
67 remote-endpoint = <&hdmi_out_con>;
73 compatible = "gpio-leds";
77 label = "pcduino3-nano:green:usr1";
83 label = "pcduino3-nano:green:usr2";
90 target-supply = <®_ahci_5v>;
99 cpu-supply = <®_dcdc2>;
115 pinctrl-names = "default";
116 pinctrl-0 = <&gmac_rgmii_pins>;
117 phy-handle = <&phy1>;
118 phy-mode = "rgmii-id";
128 remote-endpoint = <&hdmi_con_in>;
137 interrupt-parent = <&nmi_intc>;
143 pinctrl-names = "default";
144 pinctrl-0 = <&ir0_rx_pin>;
149 phy1: ethernet-phy@1 {
155 vmmc-supply = <®_vcc3v3>;
156 bus-width = <4>;
157 cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
181 regulator-always-on;
182 regulator-min-microvolt = <1000000>;
183 regulator-max-microvolt = <1400000>;
184 regulator-name = "vdd-cpu";
188 regulator-always-on;
189 regulator-min-microvolt = <1000000>;
190 regulator-max-microvolt = <1400000>;
191 regulator-name = "vdd-int-pll";
195 regulator-name = "vdd-rtc";
199 regulator-always-on;
200 regulator-min-microvolt = <3000000>;
201 regulator-max-microvolt = <3000000>;
202 regulator-name = "avcc";
212 pinctrl-names = "default";
213 pinctrl-0 = <&uart0_pb_pins>;
223 usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
224 usb1_vbus-supply = <®_usb1_vbus>;
225 usb2_vbus-supply = <®_usb1_vbus>;