Lines Matching +full:sun7i +full:- +full:a20 +full:- +full:codec
2 * Copyright 2015 - Marcus Cooper <codekipper@gmail.com>
3 * Copyright 2015 - Karsten Merker <merker@debian.org>
5 * This file is dual-licensed: you can use it either under the terms
44 /dts-v1/;
45 #include "sun7i-a20.dtsi"
46 #include "sunxi-common-regulators.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/input/input.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
53 model = "Olimex A20-Olimex-SOM-EVB";
54 compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20";
61 stdout-path = "serial0:115200n8";
64 hdmi-connector {
65 compatible = "hdmi-connector";
70 remote-endpoint = <&hdmi_out_con>;
76 compatible = "gpio-leds";
79 label = "a20-olimex-som-evb:green:usr";
81 default-state = "on";
87 target-supply = <®_ahci_5v>;
104 cpu-supply = <®_dcdc2>;
107 &codec {
112 pinctrl-names = "default";
113 pinctrl-0 = <&gmac_rgmii_pins>;
114 phy-handle = <&phy1>;
115 phy-mode = "rgmii";
125 remote-endpoint = <&hdmi_con_in>;
134 interrupt-parent = <&nmi_intc>;
148 vref-supply = <®_vcc3v0>;
151 button-190 {
158 button-390 {
165 button-600 {
172 button-800 {
179 button-980 {
186 button-1180 {
193 button-1400 {
202 phy1: ethernet-phy@1 {
208 vmmc-supply = <®_vcc3v3>;
209 bus-width = <4>;
210 cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
215 vmmc-supply = <®_vcc3v3>;
216 bus-width = <4>;
217 cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */
234 led_pins_olimex_som_evb: led-pins {
237 drive-strength = <20>;
249 regulator-always-on;
250 regulator-min-microvolt = <1000000>;
251 regulator-max-microvolt = <1400000>;
252 regulator-name = "vdd-cpu";
256 regulator-always-on;
257 regulator-min-microvolt = <1000000>;
258 regulator-max-microvolt = <1400000>;
259 regulator-name = "vdd-int-dll";
263 regulator-name = "vdd-rtc";
267 regulator-always-on;
268 regulator-min-microvolt = <3000000>;
269 regulator-max-microvolt = <3000000>;
270 regulator-name = "avcc";
286 pinctrl-names = "default";
287 pinctrl-0 = <&spi1_pi_pins>,
293 pinctrl-names = "default";
294 pinctrl-0 = <&spi2_pc_pins>,
300 pinctrl-names = "default";
301 pinctrl-0 = <&uart0_pb_pins>;
306 pinctrl-names = "default";
307 pinctrl-0 = <&uart6_pi_pins>;
312 pinctrl-names = "default";
313 pinctrl-0 = <&uart7_pi_pins>;
323 usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */
324 usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */
325 usb0_vbus-supply = <®_usb0_vbus>;
326 usb1_vbus-supply = <®_usb1_vbus>;
327 usb2_vbus-supply = <®_usb2_vbus>;