Lines Matching +full:mmci +full:- +full:gpio +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Copyright 2012 ST-Ericsson AB
6 #include <dt-bindings/interrupt-controller/irq.h>
7 #include "ste-href-family-pinctrl.dtsi"
17 pinctrl-names = "default", "sleep";
18 pinctrl-0 = <&u0_a_1_default>;
19 pinctrl-1 = <&u0_a_1_sleep>;
25 pinctrl-names = "default", "sleep";
26 pinctrl-0 = <&u1rxtx_a_1_default>;
27 pinctrl-1 = <&u1rxtx_a_1_sleep>;
31 pinctrl-names = "default", "sleep";
32 pinctrl-0 = <&u2rxtx_c_1_default>;
33 pinctrl-1 = <&u2rxtx_c_1_sleep>;
38 pinctrl-names = "default","sleep";
39 pinctrl-0 = <&i2c0_a_1_default>;
40 pinctrl-1 = <&i2c0_a_1_sleep>;
45 pinctrl-names = "default","sleep";
46 pinctrl-0 = <&i2c1_b_2_default>;
47 pinctrl-1 = <&i2c1_b_2_sleep>;
52 pinctrl-names = "default","sleep";
53 pinctrl-0 = <&i2c2_b_2_default>;
54 pinctrl-1 = <&i2c2_b_2_sleep>;
60 clock-mode = /bits/ 8 <2>;
61 #address-cells = <1>;
62 #size-cells = <0>;
65 led-cur = /bits/ 8 <0x2f>;
66 max-cur = /bits/ 8 <0x5f>;
67 linux,default-trigger = "heartbeat";
71 led-cur = /bits/ 8 <0x2f>;
72 max-cur = /bits/ 8 <0x5f>;
76 led-cur = /bits/ 8 <0x2f>;
77 max-cur = /bits/ 8 <0x5f>;
84 clock-mode = /bits/ 8 <2>;
85 #address-cells = <1>;
86 #size-cells = <0>;
89 led-cur = /bits/ 8 <0x2f>;
90 max-cur = /bits/ 8 <0x5f>;
94 led-cur = /bits/ 8 <0x2f>;
95 max-cur = /bits/ 8 <0x5f>;
99 led-cur = /bits/ 8 <0x2f>;
100 max-cur = /bits/ 8 <0x5f>;
110 pinctrl-names = "default","sleep";
111 pinctrl-0 = <&i2c3_c_2_default>;
112 pinctrl-1 = <&i2c3_c_2_sleep>;
117 vmmci: regulator-gpio {
118 compatible = "regulator-gpio";
120 regulator-min-microvolt = <1800000>;
121 regulator-max-microvolt = <2900000>;
122 regulator-name = "mmci-reg";
123 regulator-type = "voltage";
125 startup-delay-us = <100>;
133 arm,primecell-periphid = <0x10480180>;
134 max-frequency = <100000000>;
135 bus-width = <4>;
136 cap-sd-highspeed;
137 cap-mmc-highspeed;
138 sd-uhs-sdr12;
139 sd-uhs-sdr25;
140 full-pwr-cycle;
141 st,sig-dir-dat0;
142 st,sig-dir-dat2;
143 st,sig-dir-cmd;
144 st,sig-pin-fbclk;
145 vmmc-supply = <&ab8500_ldo_aux3_reg>;
146 vqmmc-supply = <&vmmci>;
147 pinctrl-names = "default", "sleep";
148 pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>;
149 pinctrl-1 = <&mc0_a_1_sleep>;
156 arm,primecell-periphid = <0x10480180>;
157 max-frequency = <100000000>;
158 bus-width = <4>;
159 non-removable;
160 pinctrl-names = "default", "sleep";
161 pinctrl-0 = <&mc1_a_1_default>;
162 pinctrl-1 = <&mc1_a_1_sleep>;
169 arm,primecell-periphid = <0x10480180>;
170 max-frequency = <100000000>;
171 bus-width = <8>;
172 cap-mmc-highspeed;
173 non-removable;
174 vmmc-supply = <&db8500_vsmps2_reg>;
175 pinctrl-names = "default", "sleep";
176 pinctrl-0 = <&mc2_a_1_default>;
177 pinctrl-1 = <&mc2_a_1_sleep>;
182 // On-board eMMC
184 arm,primecell-periphid = <0x10480180>;
185 max-frequency = <100000000>;
186 bus-width = <8>;
187 cap-mmc-highspeed;
188 non-removable;
189 vmmc-supply = <&ab8500_ldo_aux2_reg>;
190 pinctrl-names = "default", "sleep";
191 pinctrl-0 = <&mc4_a_1_default>;
192 pinctrl-1 = <&mc4_a_1_sleep>;
198 pinctrl-names = "default";
199 pinctrl-0 = <&msp0txrxtfstck_a_1_default>;
204 pinctrl-names = "default";
205 pinctrl-0 = <&msp1txrx_a_1_default>;
210 pinctrl-names = "default";
211 pinctrl-0 = <&msp2_a_1_default>;
220 ab8500-gpio {
224 pinctrl-names = "default", "sleep";
225 pinctrl-0 = <&usb_a_1_default>;
226 pinctrl-1 = <&usb_a_1_sleep>;
229 ab8500-regulators {
231 regulator-name = "V-DISPLAY";
235 regulator-name = "V-eMMC1";
239 regulator-name = "V-MMC-SD";
243 regulator-name = "V-INTCORE";
247 regulator-name = "V-TVOUT";
251 regulator-name = "V-AUD";
255 regulator-name = "V-AMIC1";
259 regulator-name = "V-AMIC2";
263 regulator-name = "V-DMIC";
267 regulator-name = "V-CSI/DSI";
282 pinctrl-names = "default", "sleep";
283 pinctrl-0 = <&lcd_default_mode>;
284 pinctrl-1 = <&lcd_sleep_mode>;