Lines Matching +full:hall +full:- +full:effect

1 // SPDX-License-Identifier: GPL-2.0-or-later
3  * Copyright 2012 ST-Ericsson AB
6 #include <dt-bindings/interrupt-controller/irq.h>
10 		compatible = "gpio-keys";
11 		#address-cells = <1>;
12 		#size-cells = <0>;
13 		vdd-supply = <&ab8500_ldo_aux1_reg>;
14 		pinctrl-names = "default";
15 		pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>;
24 			/* Hall sensor */
27 			label = "HED54XXU11 Hall Effect Sensor";
37 				interrupt-parent = <&gpio6>;
38 				interrupt-controller;
39 				vcc-supply = <&db8500_vsmps2_reg>;
40 				vio-supply = <&db8500_vsmps2_reg>;
41 				pinctrl-names = "default";
42 				pinctrl-0 = <&stmpe_stuib_mode>;
44 				wakeup-source;
45 				st,autosleep-timeout = <1024>;
48 					compatible = "st,stmpe-keypad";
50 					debounce-interval = <64>;
51 					st,scan-count = <8>;
52 					st,no-autorepeat;
80 				compatible = "st,lis331dl-accel";
81 				st,drdy-int-pin = <1>;
83 				vdd-supply = <&ab8500_ldo_aux1_reg>;
84 				vddio-supply = <&db8500_vsmps2_reg>;
85 				pinctrl-names = "default";
86 				pinctrl-0 = <&accel_stuib_mode>;
87 				interrupt-parent = <&gpio2>;
93 				compatible = "asahi-kasei,ak8974";
95 				vdd-supply = <&ab8500_ldo_aux1_reg>;
96 				vddio-supply = <&db8500_vsmps2_reg>;
97 				pinctrl-names = "default";
98 				pinctrl-0 = <&magneto_stuib_mode>;
99 				interrupt-parent = <&gpio1>;
108 				avdd-supply = <&ab8500_ldo_aux1_reg>;
110 				rohm,touch-max-x = <384>;
111 				rohm,touch-max-y = <704>;
112 				rohm,flip-y;
113 				pinctrl-names = "default";
114 				pinctrl-0 = <&touch_rohm_mode>;
120 				avdd-supply = <&ab8500_ldo_aux1_reg>;
122 				rohm,touch-max-x = <384>;
123 				rohm,touch-max-y = <704>;
124 				rohm,flip-y;
125 				pinctrl-names = "default";
126 				pinctrl-0 = <&touch_rohm_mode>;
148 			hall {
183 					 * GPIO 67 for interrupts. Pull-up
202 			dsi-controller@a0351000 {
206 					vdd1-supply = <&ab8500_ldo_aux1_reg>;
207 					reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;