Lines Matching +full:rpm +full:- +full:pm8941 +full:- +full:regulators
1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-msm8974.dtsi"
3 #include "qcom-pm8841.dtsi"
4 #include "qcom-pm8941.dtsi"
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
19 stdout-path = "serial0:115200n8";
23 rpm {
25 pm8841-regulators {
27 regulator-min-microvolt = <675000>;
28 regulator-max-microvolt = <1050000>;
32 regulator-min-microvolt = <500000>;
33 regulator-max-microvolt = <1050000>;
37 regulator-min-microvolt = <1050000>;
38 regulator-max-microvolt = <1050000>;
42 regulator-min-microvolt = <815000>;
43 regulator-max-microvolt = <900000>;
47 pm8941-regulators {
48 vdd_l1_l3-supply = <&pm8941_s1>;
49 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
50 vdd_l4_l11-supply = <&pm8941_s1>;
51 vdd_l5_l7-supply = <&pm8941_s2>;
52 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
53 vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
54 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
55 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
56 vdd_l21-supply = <&vreg_boost>;
59 regulator-min-microvolt = <1300000>;
60 regulator-max-microvolt = <1300000>;
62 regulator-always-on;
63 regulator-boot-on;
67 regulator-min-microvolt = <2150000>;
68 regulator-max-microvolt = <2150000>;
70 regulator-boot-on;
74 regulator-min-microvolt = <1800000>;
75 regulator-max-microvolt = <1800000>;
77 regulator-always-on;
78 regulator-boot-on;
82 regulator-min-microvolt = <1225000>;
83 regulator-max-microvolt = <1225000>;
85 regulator-always-on;
86 regulator-boot-on;
90 regulator-min-microvolt = <1200000>;
91 regulator-max-microvolt = <1200000>;
95 regulator-min-microvolt = <1225000>;
96 regulator-max-microvolt = <1225000>;
100 regulator-min-microvolt = <1225000>;
101 regulator-max-microvolt = <1225000>;
105 regulator-min-microvolt = <1800000>;
106 regulator-max-microvolt = <1800000>;
110 regulator-min-microvolt = <1800000>;
111 regulator-max-microvolt = <1800000>;
113 regulator-boot-on;
117 regulator-min-microvolt = <1800000>;
118 regulator-max-microvolt = <1800000>;
120 regulator-boot-on;
124 regulator-min-microvolt = <1800000>;
125 regulator-max-microvolt = <1800000>;
129 regulator-min-microvolt = <1800000>;
130 regulator-max-microvolt = <2950000>;
134 regulator-min-microvolt = <1800000>;
135 regulator-max-microvolt = <2950000>;
139 regulator-min-microvolt = <1300000>;
140 regulator-max-microvolt = <1300000>;
144 regulator-min-microvolt = <1800000>;
145 regulator-max-microvolt = <1800000>;
147 regulator-always-on;
148 regulator-boot-on;
152 regulator-min-microvolt = <1800000>;
153 regulator-max-microvolt = <2950000>;
155 regulator-boot-on;
159 regulator-min-microvolt = <1800000>;
160 regulator-max-microvolt = <1800000>;
164 regulator-min-microvolt = <2050000>;
165 regulator-max-microvolt = <2050000>;
169 regulator-min-microvolt = <2700000>;
170 regulator-max-microvolt = <2700000>;
174 regulator-min-microvolt = <2850000>;
175 regulator-max-microvolt = <2850000>;
179 regulator-min-microvolt = <2850000>;
180 regulator-max-microvolt = <2850000>;
184 regulator-min-microvolt = <3000000>;
185 regulator-max-microvolt = <3300000>;
189 regulator-min-microvolt = <2950000>;
190 regulator-max-microvolt = <2950000>;
192 regulator-boot-on;
193 regulator-system-load = <200000>;
194 regulator-allow-set-load;
198 regulator-min-microvolt = <2950000>;
199 regulator-max-microvolt = <2950000>;
201 regulator-boot-on;
205 regulator-min-microvolt = <3000000>;
206 regulator-max-microvolt = <3300000>;
210 regulator-min-microvolt = <3000000>;
211 regulator-max-microvolt = <3000000>;
215 regulator-min-microvolt = <3075000>;
216 regulator-max-microvolt = <3075000>;
218 regulator-boot-on;
225 vreg_wlan: wlan-regulator {
226 compatible = "regulator-fixed";
228 regulator-name = "wl-reg";
229 regulator-min-microvolt = <3300000>;
230 regulator-max-microvolt = <3300000>;
233 enable-active-high;
235 pinctrl-names = "default";
236 pinctrl-0 = <&wlan_regulator_pin>;
246 sdhc1_pin_a: sdhc1-pin-active {
249 drive-strength = <16>;
250 bias-disable;
253 cmd-data {
255 drive-strength = <10>;
256 bias-pull-up;
260 sdhc2_pin_a: sdhc2-pin-active {
263 drive-strength = <6>;
264 bias-disable;
267 cmd-data {
269 drive-strength = <6>;
270 bias-pull-up;
279 drive-strength = <2>;
280 bias-disable;
289 drive-strength = <2>;
290 bias-disable;
298 drive-strength = <2>;
299 bias-disable;
308 drive-strength = <2>;
309 bias-disable;
317 drive-strength = <2>;
318 bias-disable;
326 bias-disable;
327 input-enable;
336 drive-strength = <2>;
337 bias-disable;
338 input-enable;
345 drive-strength = <2>;
346 bias-pull-up;
355 drive-strength = <2>;
356 bias-disable;
377 blsp2_uart10_pin_a: blsp2-uart10-pin-active {
382 drive-strength = <2>;
383 bias-disable;
390 drive-strength = <2>;
391 bias-pull-up;
398 drive-strength = <2>;
399 bias-pull-up;
406 drive-strength = <2>;
407 bias-disable;
415 vmmc-supply = <&pm8941_l20>;
416 vqmmc-supply = <&pm8941_s3>;
418 bus-width = <8>;
419 non-removable;
421 pinctrl-names = "default";
422 pinctrl-0 = <&sdhc1_pin_a>;
428 max-frequency = <100000000>;
429 bus-width = <4>;
430 non-removable;
431 vmmc-supply = <&vreg_wlan>;
432 vqmmc-supply = <&pm8941_s3>;
434 pinctrl-names = "default";
435 pinctrl-0 = <&sdhc2_pin_a>;
437 #address-cells = <1>;
438 #size-cells = <0>;
441 compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
444 brcm,drive-strength = <10>;
446 pinctrl-names = "default";
447 pinctrl-0 = <&wlan_sleep_clk_pin>;
451 gpio-keys {
452 compatible = "gpio-keys";
453 input-name = "gpio-keys";
455 pinctrl-names = "default";
456 pinctrl-0 = <&gpio_keys_pin_a>;
458 volume-up {
461 linux,input-type = <1>;
465 volume-down {
468 linux,input-type = <1>;
476 pinctrl-names = "default";
477 pinctrl-0 = <&blsp2_uart10_pin_a>;
480 compatible = "brcm,bcm43438-bt";
481 max-speed = <3000000>;
483 pinctrl-names = "default";
484 pinctrl-0 = <&bt_pin>;
486 host-wakeup-gpios = <&msmgpio 42 GPIO_ACTIVE_HIGH>;
487 device-wakeup-gpios = <&msmgpio 62 GPIO_ACTIVE_HIGH>;
488 shutdown-gpios = <&msmgpio 41 GPIO_ACTIVE_HIGH>;
494 pinctrl-names = "default";
495 pinctrl-0 = <&i2c11_pins>;
496 clock-frequency = <355000>;
497 qcom,src-freq = <50000000>;
499 led-controller@38 {
504 #address-cells = <1>;
505 #size-cells = <0>;
509 led-sources = <0 1>;
510 label = "lcd-backlight";
511 default-brightness = <200>;
518 pinctrl-names = "default";
519 pinctrl-0 = <&i2c12_pins>;
520 clock-frequency = <100000>;
521 qcom,src-freq = <50000000>;
526 interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
527 vddio-supply = <&pm8941_lvs1>;
529 pinctrl-names = "default";
530 pinctrl-0 = <&mpu6515_pin>;
532 i2c-gate {
533 #address-cells = <1>;
534 #size-cells = <0>;
536 compatible = "asahi-kasei,ak8963";
539 vid-supply = <&pm8941_lvs1>;
540 vdd-supply = <&pm8941_l17>;
546 vdda-supply = <&pm8941_lvs1>;
547 vddd-supply = <&pm8941_l17>;
555 pinctrl-names = "default";
556 pinctrl-0 = <&i2c1_pins>;
557 clock-frequency = <100000>;
558 qcom,src-freq = <50000000>;
563 interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
565 omit-battery-class;
567 usb_otg_vbus: usb-otg-vbus { };
574 clock-frequency = <355000>;
575 qcom,src-freq = <50000000>;
577 pinctrl-names = "default";
578 pinctrl-0 = <&i2c2_pins>;
581 compatible = "syna,rmi4-i2c";
584 interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>;
585 vdd-supply = <&pm8941_l22>;
586 vio-supply = <&pm8941_lvs3>;
588 pinctrl-names = "default";
589 pinctrl-0 = <&touch_pin>;
591 #address-cells = <1>;
592 #size-cells = <0>;
594 rmi4-f01@1 {
596 syna,nosleep-mode = <1>;
599 rmi4-f12@12 {
601 syna,sensor-type = <1>;
608 pinctrl-names = "default";
609 pinctrl-0 = <&i2c3_pins>;
610 clock-frequency = <100000>;
611 qcom,src-freq = <50000000>;
616 interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
617 vdd-supply = <&pm8941_l17>;
618 vddio-supply = <&pm8941_lvs1>;
619 led-max-microamp = <100000>;
620 amstaos,proximity-diodes = <0>;
628 phy-select = <&tcsr 0xb000 0>;
631 vbus-supply = <&usb_otg_vbus>;
633 hnp-disable;
634 srp-disable;
635 adp-disable;
641 v1p8-supply = <&pm8941_l6>;
642 v3p3-supply = <&pm8941_l24>;
644 qcom,init-seq = /bits/ 8 <0x1 0x64>;
659 vdda-supply = <&pm8941_l2>;
660 vdd-supply = <&pm8941_lvs3>;
661 vddio-supply = <&pm8941_l12>;
663 #address-cells = <1>;
664 #size-cells = <0>;
669 remote-endpoint = <&panel_in>;
670 data-lanes = <0 1 2 3>;
677 compatible = "lg,acx467akm-7";
679 pinctrl-names = "default";
680 pinctrl-0 = <&panel_pin>;
684 remote-endpoint = <&dsi0_out>;
690 dsi-phy@fd922a00 {
693 vddio-supply = <&pm8941_l12>;
699 pm8941@0 {
701 gpio_keys_pin_a: gpio-keys-active {
705 bias-pull-up;
706 power-source = <PM8941_GPIO_S3>;
709 wlan_sleep_clk_pin: wl-sleep-clk {
713 output-high;
714 power-source = <PM8941_GPIO_S3>;
717 wlan_regulator_pin: wl-reg-active {
721 bias-disable;
722 power-source = <PM8941_GPIO_S3>;
726 gpio-hog;
728 output-high;
729 line-name = "otg-gpio";