Lines Matching +full:regulator +full:- +full:system +full:- +full:load
1 #include "qcom-msm8974.dtsi"
2 #include "qcom-pm8841.dtsi"
3 #include "qcom-pm8941.dtsi"
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
18 stdout-path = "serial0:115200n8";
21 gpio-keys {
22 compatible = "gpio-keys";
23 input-name = "gpio-keys";
25 pinctrl-names = "default";
26 pinctrl-0 = <&gpio_keys_pin_a>;
28 camera-snapshot {
32 wakeup-source;
33 debounce-interval = <15>;
36 volume-down {
40 wakeup-source;
41 debounce-interval = <15>;
44 volume-up {
48 wakeup-source;
49 debounce-interval = <15>;
54 compatible = "gpio-vibrator";
55 enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
56 vcc-supply = <&pm8941_l18>;
62 pm8841-regulators {
64 regulator-min-microvolt = <675000>;
65 regulator-max-microvolt = <1050000>;
69 regulator-min-microvolt = <500000>;
70 regulator-max-microvolt = <1050000>;
74 regulator-min-microvolt = <1050000>;
75 regulator-max-microvolt = <1050000>;
79 pm8941-regulators {
80 vdd_l1_l3-supply = <&pm8941_s1>;
81 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
82 vdd_l4_l11-supply = <&pm8941_s1>;
83 vdd_l5_l7-supply = <&pm8941_s2>;
84 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
85 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
86 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
87 vdd_l21-supply = <&vreg_boost>;
90 regulator-min-microvolt = <1300000>;
91 regulator-max-microvolt = <1300000>;
93 regulator-always-on;
94 regulator-boot-on;
98 regulator-min-microvolt = <2150000>;
99 regulator-max-microvolt = <2150000>;
101 regulator-boot-on;
105 regulator-min-microvolt = <1800000>;
106 regulator-max-microvolt = <1800000>;
108 regulator-always-on;
109 regulator-boot-on;
113 regulator-min-microvolt = <1225000>;
114 regulator-max-microvolt = <1225000>;
116 regulator-always-on;
117 regulator-boot-on;
121 regulator-min-microvolt = <1200000>;
122 regulator-max-microvolt = <1200000>;
126 regulator-min-microvolt = <1225000>;
127 regulator-max-microvolt = <1225000>;
131 regulator-min-microvolt = <1225000>;
132 regulator-max-microvolt = <1225000>;
136 regulator-min-microvolt = <1800000>;
137 regulator-max-microvolt = <1800000>;
141 regulator-min-microvolt = <1800000>;
142 regulator-max-microvolt = <1800000>;
144 regulator-boot-on;
148 regulator-min-microvolt = <1800000>;
149 regulator-max-microvolt = <1800000>;
151 regulator-boot-on;
155 regulator-min-microvolt = <1800000>;
156 regulator-max-microvolt = <1800000>;
160 regulator-min-microvolt = <1800000>;
161 regulator-max-microvolt = <2950000>;
165 regulator-min-microvolt = <1800000>;
166 regulator-max-microvolt = <2950000>;
170 regulator-min-microvolt = <1225000>;
171 regulator-max-microvolt = <1350000>;
175 regulator-min-microvolt = <1800000>;
176 regulator-max-microvolt = <1800000>;
178 regulator-always-on;
179 regulator-boot-on;
183 regulator-min-microvolt = <1800000>;
184 regulator-max-microvolt = <2950000>;
186 regulator-boot-on;
190 regulator-min-microvolt = <1800000>;
191 regulator-max-microvolt = <1800000>;
195 regulator-min-microvolt = <2050000>;
196 regulator-max-microvolt = <2050000>;
200 regulator-min-microvolt = <2700000>;
201 regulator-max-microvolt = <2700000>;
205 regulator-min-microvolt = <2850000>;
206 regulator-max-microvolt = <2850000>;
210 regulator-min-microvolt = <2850000>;
211 regulator-max-microvolt = <2850000>;
215 regulator-min-microvolt = <2900000>;
216 regulator-max-microvolt = <3350000>;
220 regulator-min-microvolt = <2950000>;
221 regulator-max-microvolt = <2950000>;
223 regulator-boot-on;
224 regulator-system-load = <200000>;
225 regulator-allow-set-load;
229 regulator-min-microvolt = <2950000>;
230 regulator-max-microvolt = <2950000>;
232 regulator-boot-on;
236 regulator-min-microvolt = <3000000>;
237 regulator-max-microvolt = <3300000>;
241 regulator-min-microvolt = <3000000>;
242 regulator-max-microvolt = <3000000>;
246 regulator-min-microvolt = <3075000>;
247 regulator-max-microvolt = <3075000>;
249 regulator-boot-on;
265 vddmx-supply = <&pm8841_s1>;
266 vddcx-supply = <&pm8841_s2>;
268 pinctrl-names = "default";
269 pinctrl-0 = <&wcnss_pin_a>;
271 smd-edge {
272 qcom,remote-pid = <4>;
282 sdhc1_pin_a: sdhc1-pin-active {
285 drive-strength = <16>;
286 bias-disable;
289 cmd-data {
291 drive-strength = <10>;
292 bias-pull-up;
296 sdhc2_pin_a: sdhc2-pin-active {
299 drive-strength = <10>;
300 bias-disable;
303 cmd-data {
305 drive-strength = <6>;
306 bias-pull-up;
310 wcnss_pin_a: wcnss-pin-active {
315 drive-strength = <6>;
316 bias-pull-down;
323 drive-strength = <2>;
324 bias-pull-down;
331 drive-strength = <2>;
332 bias-pull-down;
340 vmmc-supply = <&pm8941_l20>;
341 vqmmc-supply = <&pm8941_s3>;
343 bus-width = <8>;
344 non-removable;
346 pinctrl-names = "default";
347 pinctrl-0 = <&sdhc1_pin_a>;
353 vmmc-supply = <&pm8941_l21>;
354 vqmmc-supply = <&pm8941_l13>;
356 bus-width = <4>;
358 pinctrl-names = "default";
359 pinctrl-0 = <&sdhc2_pin_a>;
366 phy-select = <&tcsr 0xb000 0>;
368 vbus-supply = <&chg_otg>;
370 hnp-disable;
371 srp-disable;
372 adp-disable;
378 v1p8-supply = <&pm8941_l6>;
379 v3p3-supply = <&pm8941_l24>;
382 qcom,init-seq = /bits/ 8 <0x1 0x64>;
390 reboot-mode {
391 mode-normal = <0x77665501>;
392 mode-bootloader = <0x77665500>;
393 mode-recovery = <0x77665502>;
401 gpio_keys_pin_a: gpio-keys-active {
405 bias-pull-up;
406 power-source = <PM8941_GPIO_S3>;