Lines Matching +full:ipq8064 +full:- +full:mdio
1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-ipq8064.dtsi"
3 #include <dt-bindings/input/input.h>
6 model = "MikroTik RB3011UiAS-RM";
13 mdio-gpio0 = &mdio0;
14 mdio-gpio1 = &mdio1;
19 stdout-path = "serial0:115200n8";
27 mdio0: mdio@0 {
29 compatible = "virtual,mdio-gpio";
32 #address-cells = <1>;
33 #size-cells = <0>;
35 pinctrl-0 = <&mdio0_pins>;
36 pinctrl-names = "default";
40 #address-cells = <1>;
41 #size-cells = <0>;
45 pinctrl-0 = <&sw0_reset_pin>;
46 pinctrl-names = "default";
48 reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
52 #address-cells = <1>;
53 #size-cells = <0>;
59 phy-mode = "rgmii-id";
60 fixed-link {
62 full-duplex;
94 mdio1: mdio@1 {
96 compatible = "virtual,mdio-gpio";
99 #address-cells = <1>;
100 #size-cells = <0>;
102 pinctrl-0 = <&mdio1_pins>;
103 pinctrl-names = "default";
107 #address-cells = <1>;
108 #size-cells = <0>;
112 pinctrl-0 = <&sw1_reset_pin>;
113 pinctrl-names = "default";
115 reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
119 #address-cells = <1>;
120 #size-cells = <0>;
126 phy-mode = "sgmii";
127 fixed-link {
129 full-duplex;
168 spi-max-frequency = <50000000>;
170 pinctrl-0 = <&spi_pins>;
171 pinctrl-names = "default";
173 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
176 compatible = "jedec,spi-nor";
177 #address-cells = <1>;
178 #size-cells = <1>;
179 spi-max-frequency = <50000000>;
191 compatible = "gpio-keys";
192 pinctrl-0 = <&buttons_pins>;
193 pinctrl-names = "default";
199 linux,input-type = <1>;
200 debounce-interval = <60>;
205 compatible = "gpio-leds";
206 pinctrl-0 = <&leds_pins>;
207 pinctrl-names = "default";
212 default-state = "off";
222 phy-mode = "rgmii";
224 phy-handle = <&switch0cpu>;
226 fixed-link {
228 full-duplex;
235 phy-mode = "sgmii";
237 phy-handle = <&switch1cpu>;
239 fixed-link {
241 full-duplex;
258 drive-strength = <16>;
259 bias-disable;
266 drive-strength = <16>;
267 bias-disable;
275 drive-strength = <8>;
276 bias-disable;
284 drive-strength = <8>;
285 bias-disable;
292 drive-strength = <16>;
294 bias-disable;
295 input-disable;
302 drive-strength = <16>;
304 bias-disable;
305 input-disable;