Lines Matching +full:regulator +full:- +full:mode
1 // SPDX-License-Identifier: GPL-2.0
2 #include "qcom-apq8064-v2.0.dtsi"
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8 compatible = "asus,nexus7-flo", "qcom,apq8064";
16 stdout-path = "serial0:115200n8";
19 reserved-memory {
20 #address-cells = <1>;
21 #size-cells = <1>;
27 record-size = <0x00020000>;
28 console-size = <0x00020000>;
29 ftrace-size = <0x00020000>;
33 ext_3p3v: regulator-fixed@1 {
34 compatible = "regulator-fixed";
35 regulator-min-microvolt = <3300000>;
36 regulator-max-microvolt = <3300000>;
37 regulator-name = "ext_3p3v";
38 regulator-type = "voltage";
39 startup-delay-us = <0>;
41 enable-active-high;
42 regulator-boot-on;
45 gpio-keys {
46 compatible = "gpio-keys";
62 vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
63 vin_lvs1_3_6-supply = <&pm8921_s4>;
64 vin_lvs4_5_7-supply = <&pm8921_s4>;
67 vdd_l24-supply = <&pm8921_s1>;
68 vdd_l25-supply = <&pm8921_s1>;
69 vin_lvs2-supply = <&pm8921_s1>;
71 vdd_l26-supply = <&pm8921_s7>;
72 vdd_l27-supply = <&pm8921_s7>;
73 vdd_l28-supply = <&pm8921_s7>;
75 vdd_ncp-supply = <&pm8921_l6>;
79 regulator-always-on;
80 regulator-min-microvolt = <1225000>;
81 regulator-max-microvolt = <1225000>;
82 qcom,switch-mode-frequency = <3200000>;
83 bias-pull-down;
88 regulator-min-microvolt = <500000>;
89 regulator-max-microvolt = <1150000>;
90 qcom,switch-mode-frequency = <4800000>;
94 * msm_sdcc.1-sdc-vdd_io
95 * tabla2x-slim-CDC_VDDA_RX
96 * tabla2x-slim-CDC_VDDA_TX
97 * tabla2x-slim-CDC_VDD_CP
98 * tabla2x-slim-VDDIO_CDC
101 regulator-min-microvolt = <1800000>;
102 regulator-max-microvolt = <1800000>;
103 qcom,switch-mode-frequency = <3200000>;
104 regulator-always-on;
108 regulator-min-microvolt = <1300000>;
109 regulator-max-microvolt = <1300000>;
110 qcom,switch-mode-frequency = <3200000>;
113 /* mipi_dsi.1-dsi1_pll_vdda */
115 regulator-min-microvolt = <1200000>;
116 regulator-max-microvolt = <1200000>;
117 regulator-always-on;
120 /* msm_otg-HSUSB_3p3 */
122 regulator-min-microvolt = <3075000>;
123 regulator-max-microvolt = <3075000>;
124 bias-pull-down;
127 /* msm_otg-HSUSB_1p8 */
129 regulator-min-microvolt = <1800000>;
130 regulator-max-microvolt = <1800000>;
131 bias-pull-down;
134 /* msm_sdcc.1-sdc_vdd */
136 regulator-min-microvolt = <2950000>;
137 regulator-max-microvolt = <2950000>;
138 regulator-always-on;
139 bias-pull-down;
143 regulator-min-microvolt = <2950000>;
144 regulator-max-microvolt = <2950000>;
147 /* mipi_dsi.1-dsi1_avdd */
149 regulator-min-microvolt = <3000000>;
150 regulator-max-microvolt = <3000000>;
151 bias-pull-down;
152 regulator-always-on;
157 regulator-min-microvolt = <3000000>;
158 regulator-max-microvolt = <3000000>;
159 regulator-always-on;
164 regulator-min-microvolt = <1800000>;
165 regulator-max-microvolt = <1800000>;
166 bias-pull-down;
170 * tabla2x-slim-CDC_VDDA_A_1P2V
171 * tabla2x-slim-VDDD_CDC_D
174 regulator-min-microvolt = <1250000>;
175 regulator-max-microvolt = <1250000>;
176 bias-pull-down;
180 bias-pull-down;
184 bias-pull-down;
188 bias-pull-down;
192 bias-pull-down;
195 * mipi_dsi.1-dsi1_vddio
196 * pil_riva-pll_vdd
199 bias-pull-down;
209 remote-endpoint = <&dsi0_in>;
217 vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
218 vdd-supply = <&pm8921_l8>;
219 vddio-supply = <&pm8921_lvs7>;
220 avdd-supply = <&pm8921_l11>;
221 vcss-supply = <&ext_3p3v>;
227 vddp-supply = <&pm8921_l17>;
228 iovcc-supply = <&pm8921_lvs7>;
230 enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
231 reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
232 dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
236 remote-endpoint = <&dsi0_out>;
243 remote-endpoint = <&mdp_dsi1_out>;
249 remote-endpoint = <&panel_in>;
250 data-lanes = <0 1 2 3>;
256 dsi-phy@4700200 {
258 vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/
263 qcom,mode = <GSBI_PROT_I2C>;
266 clock-frequency = <200000>;
267 pinctrl-0 = <&i2c3_pins>;
268 pinctrl-names = "default";
273 interrupt-parent = <&tlmm_pinmux>;
282 qcom,mode = <GSBI_PROT_I2C>;
286 clock-frequency = <200000>;
287 pinctrl-0 = <&i2c1_pins>;
288 pinctrl-names = "default";
306 qcom,mode = <GSBI_PROT_I2C_UART>;
311 pinctrl-names = "default";
312 pinctrl-0 = <&gsbi6_uart_4pins>;
318 qcom,mode = <GSBI_PROT_I2C_UART>;
330 v3p3-supply = <&pm8921_l3>;
331 v1p8-supply = <&pm8921_l4>;
340 vmmc-supply = <&pm8921_l5>;
341 vqmmc-supply = <&pm8921_s4>;
346 compatible = "syscon", "simple-mfd";
349 reboot-mode {
350 compatible = "syscon-reboot-mode";
353 mode-normal = <0x77665501>;
354 mode-bootloader = <0x77665500>;
355 mode-recovery = <0x77665502>;