Lines Matching +full:0 +full:x15
25 reg = <0x00000000 0x2000000>; /* 32 MB */
33 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
34 <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
35 <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>;
40 pinctrl-0 = <&pmx_reset_button>;
52 pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>;
55 led@0 {
57 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
77 flash@0 {
79 reg = <0 0x800000>;
87 partition@0 {
89 reg = <0x0 0x100000>;
94 reg = <0x100000 0x660000>;
99 reg = <0x760000 0x20000>;
104 reg = <0x780000 0x80000>;
114 switch: switch@0 {
117 #size-cells = <0>;
118 reg = <0>;
119 dsa,member = <0 0>;
123 #size-cells = <0>;
125 port@0 {
126 reg = <0>;
164 #size-cells = <0>;
166 lan3phy: ethernet-phy@0 {
168 compatible = "ethernet-phy-id0141.0cb0",
170 reg = <0>;
171 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
176 compatible = "ethernet-phy-id0141.0cb0",
179 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
184 compatible = "ethernet-phy-id0141.0cb0",
187 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
192 compatible = "ethernet-phy-id0141.0cb0",
195 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
200 compatible = "ethernet-phy-id0141.0cb0",
203 marvell,reg-init = <3 16 0 0x1777 3 17 0 0x15>;
212 ethernet-port@0 {
220 pinctrl-0 = <&pmx_pci_gpios>;