Lines Matching +full:omap +full:- +full:usb2
1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
11 compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
15 cpu0-supply = <&vcc>;
30 compatible = "gpio-leds";
38 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
39 linux,default-trigger = "heartbeat";
44 gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
45 linux,default-trigger = "mmc0";
51 compatible = "regulator-fixed";
52 regulator-name = "hsusb2_vbus";
53 regulator-min-microvolt = <3300000>;
54 regulator-max-microvolt = <3300000>;
56 startup-delay-us = <70000>;
61 compatible = "usb-nop-xceiv";
62 reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
63 vcc-supply = <&hsusb2_power>;
64 #phy-cells = <0>;
68 compatible = "ti,omap-twl4030";
75 compatible = "gpio-keys";
81 wakeup-source;
88 powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
90 pinctrl-names = "default";
91 pinctrl-0 = <&tfp410_pins>;
94 #address-cells = <1>;
95 #size-cells = <0>;
101 remote-endpoint = <&dpi_out>;
109 remote-endpoint = <&dvi_connector_in>;
116 compatible = "dvi-connector";
121 ddc-i2c-bus = <&i2c3>;
125 remote-endpoint = <&tfp410_out>;
131 compatible = "svideo-connector";
136 remote-endpoint = <&venc_out>;
142 compatible = "arm,coresight-etb10", "arm,primecell";
146 clock-names = "apb_pclk";
147 in-ports {
150 remote-endpoint = <&etm_out>;
157 compatible = "arm,coresight-etm3x", "arm,primecell";
161 clock-names = "apb_pclk";
162 out-ports {
165 remote-endpoint = <&etb_in>;
174 pinctrl-single,pins = <
181 pinctrl-names = "default";
182 pinctrl-0 = <
187 pinctrl-single,pins = <
198 pinctrl-single,pins = <
205 pinctrl-single,pins = <
211 pinctrl-single,pins = <
245 pinctrl-names = "default";
246 pinctrl-0 = <
251 pinctrl-single,pins = <
263 clock-frequency = <2600000>;
268 interrupt-parent = <&intc>;
271 compatible = "ti,twl4030-audio";
282 clock-frequency = <100000>;
286 vmmc-supply = <&vmmc1>;
287 vqmmc-supply = <&vsim>;
288 bus-width = <8>;
300 port2-mode = "ehci-phy";
314 /delete-property/ti,no-reset-on-init;
315 /delete-property/ti,no-idle;
317 /delete-property/ti,timer-alwon;
321 /* Preferred always-on timer for clocksource */
323 ti,no-reset-on-init;
324 ti,no-idle;
332 ti,no-reset-on-init;
333 ti,no-idle;
335 assigned-clocks = <&gpt2_fck>;
336 assigned-clock-parents = <&sys_ck>;
341 ti,use-leds;
353 pinctrl-names = "default";
354 pinctrl-0 = <&uart3_pins>;
355 interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
359 pinctrl-names = "default";
360 pinctrl-0 = <&gpio1_pins>;
364 interface-type = <0>;
365 usb-phy = <&usb2_phy>;
367 phy-names = "usb2-phy";
373 regulator-name = "vdd_ehci";
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <1800000>;
376 regulator-always-on;
385 regulator-always-on;
391 pinctrl-names = "default";
392 pinctrl-0 = <&dss_dpi_pins>;
396 remote-endpoint = <&tfp410_in>;
397 data-lines = <24>;
405 vdda-supply = <&vdac>;
409 remote-endpoint = <&tv_connector_in>;
421 compatible = "ti,omap2-nand";
423 interrupt-parent = <&gpmc>;
426 ti,nand-ecc-opt = "ham1";
427 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
428 nand-bus-width = <16>;
429 #address-cells = <1>;
430 #size-cells = <1>;
432 gpmc,device-width = <2>;
433 gpmc,cs-on-ns = <0>;
434 gpmc,cs-rd-off-ns = <36>;
435 gpmc,cs-wr-off-ns = <36>;
436 gpmc,adv-on-ns = <6>;
437 gpmc,adv-rd-off-ns = <24>;
438 gpmc,adv-wr-off-ns = <36>;
439 gpmc,oe-on-ns = <6>;
440 gpmc,oe-off-ns = <48>;
441 gpmc,we-on-ns = <6>;
442 gpmc,we-off-ns = <30>;
443 gpmc,rd-cycle-ns = <72>;
444 gpmc,wr-cycle-ns = <72>;
445 gpmc,access-ns = <54>;
446 gpmc,wr-access-ns = <30>;
449 label = "X-Loader";
453 label = "U-Boot";
457 label = "U-Boot Env";