Lines Matching +full:va +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0+
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
11 stdout-path = &uart4;
20 compatible = "gpio-leds";
21 pinctrl-names = "default";
22 pinctrl-0 = <&pinctrl_gpio_leds>;
30 gpio-keys {
31 compatible = "gpio-keys";
32 pinctrl-names = "default";
33 pinctrl-0 = <&pinctrl_gpio_keys>;
39 wakeup-source;
46 wakeup-source;
53 wakeup-source;
56 volume-up {
60 wakeup-source;
63 volume-down {
67 wakeup-source;
73 compatible = "fixed-clock";
74 #clock-cells = <0>;
75 clock-frequency = <24576000>;
79 reg_audio: regulator-audio {
80 compatible = "regulator-fixed";
81 regulator-name = "cs42888_supply";
82 regulator-min-microvolt = <3300000>;
83 regulator-max-microvolt = <3300000>;
84 regulator-always-on;
87 reg_usb_h1_vbus: regulator-usb-h1-vbus {
88 compatible = "regulator-fixed";
89 regulator-name = "usb_h1_vbus";
90 regulator-min-microvolt = <5000000>;
91 regulator-max-microvolt = <5000000>;
93 enable-active-high;
96 reg_usb_otg_vbus: regulator-usb-otg-vbus {
97 compatible = "regulator-fixed";
98 regulator-name = "usb_otg_vbus";
99 regulator-min-microvolt = <5000000>;
100 regulator-max-microvolt = <5000000>;
102 enable-active-high;
105 reg_can_en: regulator-can-en {
106 compatible = "regulator-fixed";
107 regulator-name = "can-en";
108 regulator-min-microvolt = <3300000>;
109 regulator-max-microvolt = <3300000>;
111 enable-active-high;
114 reg_can_stby: regulator-can-stby {
115 compatible = "regulator-fixed";
116 regulator-name = "can-stby";
117 regulator-min-microvolt = <3300000>;
118 regulator-max-microvolt = <3300000>;
120 enable-active-high;
121 vin-supply = <®_can_en>;
124 sound-cs42888 {
125 compatible = "fsl,imx6-sabreauto-cs42888",
126 "fsl,imx-audio-cs42888";
127 model = "imx-cs42888";
128 audio-cpu = <&esai>;
129 audio-asrc = <&asrc>;
130 audio-codec = <&codec>;
131 audio-routing =
146 sound-spdif {
147 compatible = "fsl,imx-audio-spdif",
148 "fsl,imx-sabreauto-spdif";
149 model = "imx-spdif";
150 spdif-controller = <&spdif>;
151 spdif-in;
155 compatible = "pwm-backlight";
157 brightness-levels = <0 4 8 16 32 64 128 255>;
158 default-brightness-level = <7>;
163 compatible = "i2c-mux-gpio";
164 #address-cells = <1>;
165 #size-cells = <0>;
166 pinctrl-names = "default";
167 pinctrl-0 = <&pinctrl_i2c3mux>;
168 mux-gpios = <&gpio5 4 0>;
169 i2c-parent = <&i2c3>;
170 idle-state = <0>;
173 #address-cells = <1>;
174 #size-cells = <0>;
180 powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
181 interrupt-parent = <&gpio1>;
186 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
187 bus-width = <8>;
195 gpio-controller;
196 #gpio-cells = <2>;
202 gpio-controller;
203 #gpio-cells = <2>;
204 pinctrl-names = "default";
205 pinctrl-0 = <&pinctrl_max7310>;
206 reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
212 gpio-controller;
213 #gpio-cells = <2>;
216 light-sensor@44 {
219 interrupt-parent = <&gpio5>;
226 interrupt-parent = <&gpio2>;
233 pinctrl-names = "default";
234 pinctrl-0 = <&pinctrl_mma8451_int>;
235 interrupt-parent = <&gpio6>;
243 bus-width = <8>;
247 remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
248 bus-width = <8>;
252 pinctrl-names = "default";
253 pinctrl-0 = <&pinctrl_ipu1_csi0>;
257 assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
262 assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
266 assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
270 cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
271 pinctrl-names = "default";
272 pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
276 #address-cells = <1>;
277 #size-cells = <1>;
278 compatible = "st,m25p32", "jedec,spi-nor";
279 spi-max-frequency = <20000000>;
285 pinctrl-names = "default";
286 pinctrl-0 = <&pinctrl_esai>;
287 assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
289 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
290 assigned-clock-rates = <0>, <24576000>;
295 pinctrl-names = "default";
296 pinctrl-0 = <&pinctrl_enet>;
297 phy-mode = "rgmii-id";
298 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
300 fsl,err006687-workaround-present;
305 pinctrl-names = "default";
306 pinctrl-0 = <&pinctrl_flexcan1>;
307 xceiver-supply = <®_can_stby>;
312 pinctrl-names = "default";
313 pinctrl-0 = <&pinctrl_flexcan2>;
314 xceiver-supply = <®_can_stby>;
319 pinctrl-names = "default";
320 pinctrl-0 = <&pinctrl_gpmi_nand>;
325 pinctrl-names = "default";
326 pinctrl-0 = <&pinctrl_hdmi_cec>;
327 ddc-i2c-bus = <&i2c2>;
332 clock-frequency = <100000>;
333 pinctrl-names = "default";
334 pinctrl-0 = <&pinctrl_i2c2>;
343 regulator-min-microvolt = <300000>;
344 regulator-max-microvolt = <1875000>;
345 regulator-boot-on;
346 regulator-always-on;
347 regulator-ramp-delay = <6250>;
351 regulator-min-microvolt = <300000>;
352 regulator-max-microvolt = <1875000>;
353 regulator-boot-on;
354 regulator-always-on;
355 regulator-ramp-delay = <6250>;
359 regulator-min-microvolt = <800000>;
360 regulator-max-microvolt = <3300000>;
361 regulator-boot-on;
362 regulator-always-on;
366 regulator-min-microvolt = <400000>;
367 regulator-max-microvolt = <1975000>;
368 regulator-boot-on;
369 regulator-always-on;
373 regulator-min-microvolt = <400000>;
374 regulator-max-microvolt = <1975000>;
375 regulator-boot-on;
376 regulator-always-on;
380 regulator-min-microvolt = <800000>;
381 regulator-max-microvolt = <3300000>;
385 regulator-min-microvolt = <5000000>;
386 regulator-max-microvolt = <5150000>;
390 regulator-min-microvolt = <1000000>;
391 regulator-max-microvolt = <3000000>;
392 regulator-boot-on;
393 regulator-always-on;
397 regulator-boot-on;
398 regulator-always-on;
402 regulator-min-microvolt = <800000>;
403 regulator-max-microvolt = <1550000>;
407 regulator-min-microvolt = <800000>;
408 regulator-max-microvolt = <1550000>;
412 regulator-min-microvolt = <1800000>;
413 regulator-max-microvolt = <3300000>;
417 regulator-min-microvolt = <1800000>;
418 regulator-max-microvolt = <3300000>;
419 regulator-always-on;
423 regulator-min-microvolt = <1800000>;
424 regulator-max-microvolt = <3300000>;
425 regulator-always-on;
429 regulator-min-microvolt = <1800000>;
430 regulator-max-microvolt = <3300000>;
431 regulator-always-on;
440 clock-names = "mclk";
441 VA-supply = <®_audio>;
442 VD-supply = <®_audio>;
443 VLS-supply = <®_audio>;
444 VLC-supply = <®_audio>;
450 pinctrl-names = "default";
451 pinctrl-0 = <&pinctrl_egalax_int>;
452 interrupt-parent = <&gpio2>;
454 wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
459 pinctrl-names = "default";
460 pinctrl-0 = <&pinctrl_i2c3>;
465 pinctrl-names = "default";
466 pinctrl-0 = <&pinctrl_hog>;
468 imx6qdl-sabreauto {
491 pinctrl_egalax_int: egalax-intgrp {
780 lvds-channel@0 {
781 fsl,data-mapping = "spwg";
782 fsl,data-width = <18>;
785 display-timings {
786 native-mode = <&timing0>;
788 clock-frequency = <65000000>;
791 hback-porch = <220>;
792 hfront-porch = <40>;
793 vback-porch = <21>;
794 vfront-porch = <7>;
795 hsync-len = <60>;
796 vsync-len = <10>;
803 #pwm-cells = <2>;
804 pinctrl-names = "default";
805 pinctrl-0 = <&pinctrl_pwm3>;
814 pinctrl-names = "default";
815 pinctrl-0 = <&pinctrl_spdif>;
820 pinctrl-names = "default";
821 pinctrl-0 = <&pinctrl_uart4>;
826 vbus-supply = <®_usb_h1_vbus>;
831 vbus-supply = <®_usb_otg_vbus>;
832 pinctrl-names = "default";
833 pinctrl-0 = <&pinctrl_usbotg>;
838 pinctrl-names = "default", "state_100mhz", "state_200mhz";
839 pinctrl-0 = <&pinctrl_usdhc3>;
840 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
841 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
842 cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
843 wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
848 pinctrl-names = "default";
849 pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
854 compatible = "cfi-flash";
856 #address-cells = <1>;
857 #size-cells = <1>;
858 bank-width = <2>;
859 fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000