Lines Matching +full:vbus +full:- +full:divider
4 * This file is dual-licensed: you can use it either under the terms
22 * MA 02110-1301 USA
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/input/input.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
64 stdout-path = &uart2;
67 backlight-display {
68 compatible = "pwm-backlight";
70 brightness-levels = <
83 default-brightness-level = <100>;
86 backlight-keypad {
87 compatible = "gpio-backlight";
89 default-on;
92 gpio-keys {
93 compatible = "gpio-keys";
94 #address-cells = <1>;
95 #size-cells = <0>;
97 user-pb {
103 user-pb1x {
106 interrupt-parent = <&gsc>;
110 key-erased {
111 label = "key-erased";
113 interrupt-parent = <&gsc>;
117 eeprom-wp {
120 interrupt-parent = <&gsc>;
127 interrupt-parent = <&gsc>;
131 switch-hold {
134 interrupt-parent = <&gsc>;
140 compatible = "gpio-leds";
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_gpio_leds>;
147 default-state = "on";
148 linux,default-trigger = "heartbeat";
154 default-state = "off";
160 default-state = "off";
170 compatible = "pps-gpio";
171 pinctrl-names = "default";
172 pinctrl-0 = <&pinctrl_pps>;
176 reg_2p5v: regulator-2p5v {
177 compatible = "regulator-fixed";
178 regulator-name = "2P5V";
179 regulator-min-microvolt = <2500000>;
180 regulator-max-microvolt = <2500000>;
181 regulator-always-on;
184 reg_3p3v: regulator-3p3v {
185 compatible = "regulator-fixed";
186 regulator-name = "3P3V";
187 regulator-min-microvolt = <3300000>;
188 regulator-max-microvolt = <3300000>;
189 regulator-always-on;
192 reg_5p0v: regulator-5p0v {
193 compatible = "regulator-fixed";
194 regulator-name = "5P0V";
195 regulator-min-microvolt = <5000000>;
196 regulator-max-microvolt = <5000000>;
197 regulator-always-on;
200 reg_12p0v: regulator-12p0v {
201 compatible = "regulator-fixed";
202 regulator-name = "12P0V";
203 regulator-min-microvolt = <12000000>;
204 regulator-max-microvolt = <12000000>;
206 enable-active-high;
209 reg_1p4v: regulator-vddsoc {
210 compatible = "regulator-fixed";
211 regulator-name = "vdd_soc";
212 regulator-min-microvolt = <1400000>;
213 regulator-max-microvolt = <1400000>;
214 regulator-always-on;
217 reg_usb_h1_vbus: regulator-usb-h1-vbus {
218 compatible = "regulator-fixed";
219 regulator-name = "usb_h1_vbus";
220 regulator-min-microvolt = <5000000>;
221 regulator-max-microvolt = <5000000>;
222 regulator-always-on;
225 reg_usb_otg_vbus: regulator-usb-otg-vbus {
226 compatible = "regulator-fixed";
227 regulator-name = "usb_otg_vbus";
228 regulator-min-microvolt = <5000000>;
229 regulator-max-microvolt = <5000000>;
231 enable-active-high;
235 compatible = "fsl,imx6q-ventana-sgtl5000",
236 "fsl,imx-audio-sgtl5000";
237 model = "sgtl5000-audio";
238 ssi-controller = <&ssi1>;
239 audio-codec = <&sgtl5000>;
240 audio-routing =
244 mux-int-port = <1>;
245 mux-ext-port = <4>;
250 pinctrl-names = "default";
251 pinctrl-0 = <&pinctrl_audmux>;
256 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
257 pinctrl-names = "default";
258 pinctrl-0 = <&pinctrl_ecspi3>;
263 pinctrl-names = "default";
264 pinctrl-0 = <&pinctrl_flexcan>;
269 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
271 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
276 pinctrl-names = "default";
277 pinctrl-0 = <&pinctrl_enet>;
278 phy-mode = "rgmii-id";
279 phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
284 ddc-i2c-bus = <&i2c3>;
289 clock-frequency = <100000>;
290 pinctrl-names = "default";
291 pinctrl-0 = <&pinctrl_i2c1>;
297 interrupt-parent = <&gpio1>;
299 interrupt-controller;
300 #interrupt-cells = <1>;
301 #size-cells = <0>;
304 compatible = "gw,gsc-adc";
305 #address-cells = <1>;
306 #size-cells = <0>;
397 gpio-controller;
398 #gpio-cells = <2>;
399 interrupt-parent = <&gsc>;
434 clock-frequency = <100000>;
435 pinctrl-names = "default";
436 pinctrl-0 = <&pinctrl_i2c2>;
442 #sound-dai-cells = <0>;
444 VDDA-supply = <®_1p8v>;
445 VDDIO-supply = <®_3p3v>;
449 compatible = "st,lsm9ds1-magn";
451 pinctrl-names = "default";
452 pinctrl-0 = <&pinctrl_mag>;
453 interrupt-parent = <&gpio5>;
459 pinctrl-names = "default";
460 pinctrl-0 = <&pinctrl_keypad>;
462 interrupt-parent = <&gpio5>;
475 keypad,num-rows = <4>;
476 keypad,num-columns = <4>;
481 pinctrl-names = "default";
482 pinctrl-0 = <&pinctrl_pmic>;
484 interrupt-parent = <&gpio1>;
490 regulator-name = "vddddr";
491 regulator-min-microvolt = <868310>;
492 regulator-max-microvolt = <1684000>;
493 lltc,fb-voltage-divider = <221000 200000>;
494 regulator-ramp-delay = <7000>;
495 regulator-boot-on;
496 regulator-always-on;
501 regulator-name = "vddarm";
502 regulator-min-microvolt = <796551>;
503 regulator-max-microvolt = <1544827>;
504 lltc,fb-voltage-divider = <243000 261000>;
505 regulator-ramp-delay = <7000>;
506 regulator-boot-on;
507 regulator-always-on;
511 /* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
513 regulator-name = "vdd1p8";
514 regulator-min-microvolt = <1033310>;
515 regulator-max-microvolt = <2004000>;
516 lltc,fb-voltage-divider = <301000 200000>;
517 regulator-ramp-delay = <7000>;
518 regulator-boot-on;
519 regulator-always-on;
522 /* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
524 regulator-name = "vdd1p0";
525 regulator-min-microvolt = <950000>;
526 regulator-max-microvolt = <1050000>;
527 lltc,fb-voltage-divider = <78700 200000>;
528 regulator-boot-on;
529 regulator-always-on;
534 regulator-name = "vdd1p8a";
535 regulator-min-microvolt = <1800000>;
536 regulator-max-microvolt = <1800000>;
537 regulator-boot-on;
542 regulator-name = "vdd3p0";
543 regulator-min-microvolt = <3023250>;
544 regulator-max-microvolt = <3023250>;
545 lltc,fb-voltage-divider = <634000 200000>;
546 regulator-boot-on;
547 regulator-always-on;
553 compatible = "st,lsm9ds1-imu";
555 st,drdy-int-pin = <1>;
556 pinctrl-names = "default";
557 pinctrl-0 = <&pinctrl_imu>;
558 interrupt-parent = <&gpio5>;
564 clock-frequency = <100000>;
565 pinctrl-names = "default";
566 pinctrl-0 = <&pinctrl_i2c3>;
572 interrupt-parent = <&gpio5>;
574 wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
579 fsl,dual-channel;
582 lvds-channel@0 {
583 fsl,data-mapping = "spwg";
584 fsl,data-width = <18>;
587 display-timings {
588 native-mode = <&timing0>;
590 clock-frequency = <65000000>;
593 hback-porch = <220>;
594 hfront-porch = <40>;
595 vback-porch = <21>;
596 vfront-porch = <7>;
597 hsync-len = <60>;
598 vsync-len = <10>;
605 pinctrl-names = "default";
606 pinctrl-0 = <&pinctrl_pcie>;
607 reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
612 pinctrl-names = "default";
613 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
618 pinctrl-names = "default";
619 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
624 #pwm-cells = <2>;
625 pinctrl-names = "default";
626 pinctrl-0 = <&pinctrl_pwm4>;
635 pinctrl-names = "default";
636 pinctrl-0 = <&pinctrl_uart1>;
637 uart-has-rtscts;
638 rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
643 pinctrl-names = "default";
644 pinctrl-0 = <&pinctrl_uart2>;
649 pinctrl-names = "default";
650 pinctrl-0 = <&pinctrl_uart5>;
655 vbus-supply = <®_usb_otg_vbus>;
656 pinctrl-names = "default";
657 pinctrl-0 = <&pinctrl_usbotg>;
658 disable-over-current;
663 vbus-supply = <®_usb_h1_vbus>;
664 pinctrl-names = "default";
665 pinctrl-0 = <&pinctrl_usbh1>;
670 pinctrl-names = "default";
671 pinctrl-0 = <&pinctrl_usdhc2>;
672 bus-width = <8>;
673 vmmc-supply = <®_3p3v>;
674 non-removable;
679 pinctrl-names = "default", "state_100mhz", "state_200mhz";
680 pinctrl-0 = <&pinctrl_usdhc3>;
681 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
682 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
683 cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
684 vmmc-supply = <®_3p3v>;
689 pinctrl-names = "default";
690 pinctrl-0 = <&pinctrl_wdog>;
691 fsl,ext-reset-output;