Lines Matching +full:uart +full:- +full:has +full:- +full:rtscts
6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/input/input.h>
53 compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q";
56 stdout-path = &uart4;
64 reg_3p3v: regulator-3p3v {
65 compatible = "regulator-fixed";
66 regulator-name = "3P3V";
67 regulator-min-microvolt = <3300000>;
68 regulator-max-microvolt = <3300000>;
71 reg_1p8v: regulator-1p8v {
72 compatible = "regulator-fixed";
73 regulator-name = "1P8V";
74 regulator-min-microvolt = <1800000>;
75 regulator-max-microvolt = <1800000>;
78 wlan_en_reg: regulator-wlan_en {
79 compatible = "regulator-fixed";
80 regulator-name = "wlan-en-regulator";
81 regulator-min-microvolt = <1800000>;
82 regulator-max-microvolt = <1800000>;
84 startup-delay-us = <70000>;
85 enable-active-high;
88 reg_usb_otg_vbus: regulator-usb_vbus {
89 compatible = "regulator-fixed";
90 regulator-name = "usb_otg_vbus";
91 regulator-min-microvolt = <5000000>;
92 regulator-max-microvolt = <5000000>;
94 enable-active-high;
95 vin-supply = <&swbst_reg>;
98 gpio-keys {
99 compatible = "gpio-keys";
100 pinctrl-names = "default";
101 pinctrl-0 = <&pinctrl_gpio_keys>;
106 wakeup-source;
112 compatible = "fsl,imx-sgtl5000",
113 "fsl,imx-audio-sgtl5000";
114 model = "audio-sgtl5000";
115 ssi-controller = <&ssi1>;
116 audio-codec = <&codec>;
117 audio-routing =
121 mux-int-port = <1>;
122 mux-ext-port = <3>;
125 backlight_lvds: backlight-lvds {
126 compatible = "pwm-backlight";
128 brightness-levels = <
141 default-brightness-level = <94>;
151 remote-endpoint = <&lvds0_out>;
158 pinctrl-names = "default";
159 pinctrl-0 = <&pinctrl_audmux>;
164 pinctrl-names = "default";
165 pinctrl-0 = <&pinctrl_flexcan2>;
170 assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
172 assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_enet>;
179 phy-mode = "rgmii";
184 ddc-i2c-bus = <&i2c2>;
189 clock-frequency = <100000>;
190 pinctrl-names = "default";
191 pinctrl-0 = <&pinctrl_i2c1>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
200 VDDA-supply = <®_1p8v>;
201 VDDIO-supply = <®_1p8v>;
206 clock-frequency = <100000>;
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_i2c2>;
217 regulator-min-microvolt = <300000>;
218 regulator-max-microvolt = <1875000>;
219 regulator-boot-on;
220 regulator-always-on;
221 regulator-ramp-delay = <6250>;
225 regulator-min-microvolt = <300000>;
226 regulator-max-microvolt = <1875000>;
227 regulator-boot-on;
228 regulator-always-on;
229 regulator-ramp-delay = <6250>;
233 regulator-min-microvolt = <800000>;
234 regulator-max-microvolt = <3300000>;
235 regulator-boot-on;
236 regulator-always-on;
237 regulator-ramp-delay = <6250>;
241 regulator-min-microvolt = <400000>;
242 regulator-max-microvolt = <1975000>;
243 regulator-boot-on;
244 regulator-always-on;
248 regulator-min-microvolt = <400000>;
249 regulator-max-microvolt = <1975000>;
250 regulator-boot-on;
251 regulator-always-on;
255 regulator-min-microvolt = <800000>;
256 regulator-max-microvolt = <3300000>;
260 regulator-min-microvolt = <5000000>;
261 regulator-max-microvolt = <5150000>;
265 regulator-min-microvolt = <1000000>;
266 regulator-max-microvolt = <3000000>;
267 regulator-boot-on;
268 regulator-always-on;
272 regulator-boot-on;
273 regulator-always-on;
277 regulator-min-microvolt = <800000>;
278 regulator-max-microvolt = <1550000>;
282 regulator-min-microvolt = <800000>;
283 regulator-max-microvolt = <1550000>;
287 regulator-min-microvolt = <1800000>;
288 regulator-max-microvolt = <3300000>;
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <3300000>;
294 regulator-always-on;
298 regulator-min-microvolt = <1800000>;
299 regulator-max-microvolt = <3300000>;
300 regulator-always-on;
303 regulator-min-microvolt = <1800000>;
304 regulator-max-microvolt = <3300000>;
305 regulator-always-on;
311 compatible = "microchip,ar1021-i2c";
313 interrupt-parent = <&gpio6>;
319 clock-frequency = <100000>;
320 pinctrl-names = "default";
321 pinctrl-0 = <&pinctrl_i2c3>;
326 pinctrl-names = "default";
381 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
438 pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp {
557 lvds-channel@1 {
558 fsl,data-mapping = "spwg";
559 fsl,data-width = <18>;
566 remote-endpoint = <&panel_in>;
573 #pwm-cells = <2>;
574 pinctrl-names = "default";
575 pinctrl-0 = <&pinctrl_pwm1>;
588 pinctrl-names = "default";
589 pinctrl-0 = <&pinctrl_uart1>;
590 uart-has-rtscts;
591 fsl,dte-mode;
596 pinctrl-names = "default";
597 pinctrl-0 = <&pinctrl_uart2>;
598 uart-has-rtscts;
603 pinctrl-names = "default";
604 pinctrl-0 = <&pinctrl_uart3>;
605 uart-has-rtscts;
610 pinctrl-names = "default";
611 pinctrl-0 = <&pinctrl_uart4>;
612 uart-has-rtscts;
617 pinctrl-names = "default";
618 pinctrl-0 = <&pinctrl_uart5>;
619 uart-has-rtscts;
624 vbus-supply = <®_usb_otg_vbus>;
625 pinctrl-names = "default";
626 pinctrl-0 = <&pinctrl_usbotg>;
627 disable-over-current;
628 srp-disable;
629 hnp-disable;
630 adp-disable;
639 fsl,tx-d-cal = <0x5>;
643 fsl,tx-d-cal = <0x5>;
647 pinctrl-names = "default";
648 pinctrl-0 = <&pinctrl_usdhc1>;
649 bus-width = <8>;
650 keep-power-in-suspend;
651 vmmc-supply = <®_3p3v>;
656 pinctrl-names = "default";
657 pinctrl-0 = <&pinctrl_usdhc2>;
658 bus-width = <4>;
659 vmmc-supply = <&wlan_en_reg>;
660 no-1-8-v;
661 keep-power-in-suspend;
662 non-removable;
663 cap-power-off-card;
666 #address-cells = <1>;
667 #size-cells = <0>;
671 interrupt-parent = <&gpio5>;
673 ref-clock-frequency = <38400000>;
674 tcxo-clock-frequency = <26000000>;
679 pinctrl-names = "default";
680 pinctrl-0 = <&pinctrl_usdhc3>;
681 bus-width = <4>;
682 cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
683 no-1-8-v;
684 keep-power-in-suspend;
685 wakeup-source;