Lines Matching +full:dcd +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
15 compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
18 stdout-path = &uart3;
26 rmii_clk: clock-rmii {
28 compatible = "fixed-clock";
29 #clock-cells = <0>;
30 clock-frequency = <50000000>;
33 reg_usb_h1_vbus: regulator-usb-h1-vbus {
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
36 compatible = "regulator-fixed";
37 regulator-name = "usb_h1_vbus";
38 regulator-min-microvolt = <5000000>;
39 regulator-max-microvolt = <5000000>;
41 enable-active-high;
45 compatible = "eckelmann,siox-gpio";
46 pinctrl-names = "default";
47 pinctrl-0 = <&pinctrl_siox>;
48 din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
49 dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
50 dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
51 dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
56 pinctrl-names = "default";
57 pinctrl-0 = <&pinctrl_flexcan1>;
62 pinctrl-names = "default";
63 pinctrl-0 = <&pinctrl_flexcan2>;
68 pinctrl-names = "default";
69 pinctrl-0 = <&pinctrl_ecspi2>;
70 cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
76 spi-max-frequency = <15000000>;
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_ecspi1>;
83 cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
87 compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
89 spi-max-frequency = <10000000>;
94 gpio-line-names = "buzzer", "", "", "", "", "", "", "",
101 gpio-line-names = "", "", "", "", "", "", "", "in2",
108 gpio-line-names = "", "", "", "", "", "", "", "",
115 pinctrl-names = "default";
116 pinctrl-0 = <&pinctrl_i2c1>;
119 temperature-sensor@49 {
131 pinctrl-names = "default";
132 pinctrl-0 = <&pinctrl_hog>;
231 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x0001b010 /* DCD */
243 MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b010 /* DCD */
295 pinctrl-names = "default";
296 pinctrl-0 = <&pinctrl_enet>;
297 phy-mode = "rmii";
298 phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
299 phy-handle = <&phy>;
304 #address-cells = <1>;
305 #size-cells = <0>;
307 phy: ethernet-phy@1 {
308 compatible = "ethernet-phy-ieee802.3-c22";
315 pinctrl-names = "default";
316 pinctrl-0 = <&pinctrl_pcie>;
317 reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
322 pinctrl-names = "default";
323 pinctrl-0 = <&pinctrl_uart1_dte>;
324 uart-has-rtscts;
325 fsl,dte-mode;
326 dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
327 dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
328 dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
333 pinctrl-names = "default";
334 pinctrl-0 = <&pinctrl_uart2_dte>;
335 uart-has-rtscts;
336 fsl,dte-mode;
337 dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
338 dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
339 dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
344 pinctrl-names = "default";
345 pinctrl-0 = <&pinctrl_uart3_dce>;
350 pinctrl-names = "default";
351 pinctrl-0 = <&pinctrl_uart4_dce>;
352 rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
357 pinctrl-names = "default";
358 pinctrl-0 = <&pinctrl_uart5_dce>;
359 rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
364 pinctrl-names = "default";
365 pinctrl-0 = <&pinctrl_usbh1>;
366 vbus-supply = <®_usb_h1_vbus>;
376 pinctrl-names = "default";
377 pinctrl-0 = <&pinctrl_usdhc3>;
378 bus-width = <8>;
379 non-removable;