Lines Matching +full:vpll +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
7 /dts-v1/;
13 compatible = "zii,imx51-scu3-esb", "fsl,imx51";
16 stdout-path = &uart1;
25 usb_vbus: regulator-usb-vbus {
26 compatible = "regulator-fixed";
27 regulator-name = "usb_vbus";
28 regulator-min-microvolt = <5000000>;
29 regulator-max-microvolt = <5000000>;
31 pinctrl-names = "default";
32 pinctrl-0 = <&pinctrl_usb_mmc_reset>;
34 startup-delay-us = <150000>;
39 cpu-supply = <&sw1_reg>;
43 pinctrl-names = "default";
44 pinctrl-0 = <&pinctrl_ecspi1>;
45 cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
51 pinctrl-names = "default";
52 pinctrl-0 = <&pinctrl_pmic>;
53 spi-max-frequency = <6000000>;
54 spi-cs-high;
56 interrupt-parent = <&gpio1>;
58 fsl,mc13xxx-uses-adc;
62 regulator-min-microvolt = <600000>;
63 regulator-max-microvolt = <1375000>;
64 regulator-boot-on;
65 regulator-always-on;
69 regulator-min-microvolt = <900000>;
70 regulator-max-microvolt = <1850000>;
71 regulator-boot-on;
72 regulator-always-on;
76 regulator-min-microvolt = <1100000>;
77 regulator-max-microvolt = <1850000>;
78 regulator-boot-on;
79 regulator-always-on;
83 regulator-min-microvolt = <1100000>;
84 regulator-max-microvolt = <1850000>;
85 regulator-boot-on;
86 regulator-always-on;
89 vpll_reg: vpll {
90 regulator-min-microvolt = <1050000>;
91 regulator-max-microvolt = <1800000>;
92 regulator-boot-on;
93 regulator-always-on;
97 regulator-min-microvolt = <1650000>;
98 regulator-max-microvolt = <1650000>;
99 regulator-boot-on;
103 regulator-min-microvolt = <1800000>;
104 regulator-max-microvolt = <3150000>;
108 regulator-always-on;
112 regulator-min-microvolt = <2400000>;
113 regulator-max-microvolt = <2775000>;
114 regulator-boot-on;
115 regulator-always-on;
119 regulator-min-microvolt = <2775000>;
120 regulator-max-microvolt = <2775000>;
124 regulator-min-microvolt = <2300000>;
125 regulator-max-microvolt = <3000000>;
129 regulator-min-microvolt = <2500000>;
130 regulator-max-microvolt = <3000000>;
134 regulator-min-microvolt = <1200000>;
135 regulator-max-microvolt = <1200000>;
139 regulator-min-microvolt = <1200000>;
140 regulator-max-microvolt = <3150000>;
141 regulator-always-on;
145 regulator-min-microvolt = <1800000>;
146 regulator-max-microvolt = <2900000>;
147 regulator-always-on;
152 #address-cells = <1>;
153 #size-cells = <0>;
154 led-control = <0x0 0x0 0x3f83f8 0x0>;
159 linux,default-trigger = "default-on";
165 linux,default-trigger = "heartbeat";
171 #address-cells = <1>;
172 #size-cells = <1>;
174 spi-max-frequency = <25000000>;
180 pinctrl-names = "default";
181 pinctrl-0 = <&pinctrl_esdhc1>;
182 bus-width = <8>;
183 non-removable;
184 no-1-8-v;
185 no-sdio;
186 no-sd;
191 pinctrl-names = "default";
192 pinctrl-0 = <&pinctrl_esdhc4>;
193 bus-width = <4>;
194 no-1-8-v;
195 no-sdio;
196 cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
201 pinctrl-names = "default";
202 pinctrl-0 = <&pinctrl_fec>;
203 phy-mode = "mii";
206 fixed-link {
208 full-duplex;
212 #address-cells = <1>;
213 #size-cells = <0>;
220 eeprom-length = <512>;
221 interrupt-parent = <&gpio4>;
223 interrupt-controller;
224 #interrupt-cells = <2>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&pinctrl_switch>;
229 #address-cells = <1>;
230 #size-cells = <0>;
260 phy-mode = "sgmii";
262 fixed-link {
264 full-duplex;
271 phy-mode = "mii";
274 fixed-link {
276 full-duplex;
289 pinctrl-names = "default";
290 pinctrl-0 = <&pinctrl_i2c2>;
306 pinctrl-names = "default";
307 pinctrl-0 = <&pinctrl_uart1>;
312 pinctrl-names = "default";
313 pinctrl-0 = <&pinctrl_uart2>;
318 pinctrl-names = "default";
319 pinctrl-0 = <&pinctrl_uart3>;
322 rave-sp {
323 compatible = "zii,rave-sp-esb";
324 current-speed = <57600>;
325 #address-cells = <1>;
326 #size-cells = <1>;
329 compatible = "zii,rave-sp-watchdog-legacy";
333 compatible = "zii,rave-sp-eeprom";
335 #address-cells = <1>;
336 #size-cells = <1>;
337 zii,eeprom-name = "main-eeprom";
344 disable-over-current;
346 vbus-supply = <&usb_vbus>;
351 vcc-supply = <&vusb2_reg>;