Lines Matching +full:vpll +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
7 /dts-v1/;
13 compatible = "zii,imx51-scu2-mezz", "fsl,imx51";
16 stdout-path = &uart1;
26 mdio-gpio0 = &mdio_gpio;
29 usb_vbus: regulator-usb-vbus {
30 compatible = "regulator-fixed";
31 pinctrl-names = "default";
32 pinctrl-0 = <&pinctrl_usb_mmc_reset>;
34 startup-delay-us = <150000>;
35 regulator-name = "usb_vbus";
36 regulator-min-microvolt = <5000000>;
37 regulator-max-microvolt = <5000000>;
40 mdio_gpio: mdio-gpio {
41 compatible = "virtual,mdio-gpio";
42 pinctrl-names = "default";
43 pinctrl-0 = <&pinctrl_swmdio>;
46 #address-cells = <1>;
47 #size-cells = <0>;
53 eeprom-length = <512>;
54 interrupt-parent = <&gpio1>;
56 interrupt-controller;
57 #interrupt-cells = <2>;
60 #address-cells = <1>;
61 #size-cells = <0>;
88 fixed-link {
90 full-duplex;
97 phy-mode = "sgmii";
99 fixed-link {
101 full-duplex;
110 cpu-supply = <&sw1_reg>;
114 pinctrl-names = "default";
115 pinctrl-0 = <&pinctrl_ecspi1>;
116 cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_pmic>;
124 spi-max-frequency = <6000000>;
125 spi-cs-high;
127 interrupt-parent = <&gpio1>;
129 fsl,mc13xxx-uses-adc;
133 regulator-min-microvolt = <600000>;
134 regulator-max-microvolt = <1375000>;
135 regulator-boot-on;
136 regulator-always-on;
140 regulator-min-microvolt = <900000>;
141 regulator-max-microvolt = <1850000>;
142 regulator-boot-on;
143 regulator-always-on;
147 regulator-min-microvolt = <1100000>;
148 regulator-max-microvolt = <1850000>;
149 regulator-boot-on;
150 regulator-always-on;
154 regulator-min-microvolt = <1100000>;
155 regulator-max-microvolt = <1850000>;
156 regulator-boot-on;
157 regulator-always-on;
160 vpll_reg: vpll {
161 regulator-min-microvolt = <1050000>;
162 regulator-max-microvolt = <1800000>;
163 regulator-boot-on;
164 regulator-always-on;
168 regulator-min-microvolt = <1650000>;
169 regulator-max-microvolt = <1650000>;
170 regulator-boot-on;
174 regulator-min-microvolt = <1800000>;
175 regulator-max-microvolt = <3150000>;
176 regulator-always-on;
180 regulator-always-on;
184 regulator-min-microvolt = <2400000>;
185 regulator-max-microvolt = <2775000>;
186 regulator-boot-on;
187 regulator-always-on;
191 regulator-min-microvolt = <2775000>;
192 regulator-max-microvolt = <2775000>;
196 regulator-min-microvolt = <2300000>;
197 regulator-max-microvolt = <3000000>;
201 regulator-min-microvolt = <2500000>;
202 regulator-max-microvolt = <3000000>;
206 regulator-min-microvolt = <1200000>;
207 regulator-max-microvolt = <1200000>;
211 regulator-min-microvolt = <1200000>;
212 regulator-max-microvolt = <3150000>;
213 regulator-always-on;
217 regulator-min-microvolt = <1800000>;
218 regulator-max-microvolt = <2900000>;
219 regulator-always-on;
224 #address-cells = <1>;
225 #size-cells = <0>;
226 led-control = <0x0 0x0 0x3f83f8 0x0>;
231 linux,default-trigger = "default-on";
237 linux,default-trigger = "heartbeat";
245 spi-max-frequency = <25000000>;
250 pinctrl-names = "default";
251 pinctrl-0 = <&pinctrl_esdhc1>;
252 bus-width = <8>;
253 non-removable;
254 no-1-8-v;
255 no-sdio;
256 no-sd;
261 pinctrl-names = "default";
262 pinctrl-0 = <&pinctrl_esdhc4>;
263 bus-width = <4>;
264 no-1-8-v;
265 no-sdio;
266 cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
271 pinctrl-names = "default";
272 pinctrl-0 = <&pinctrl_fec>;
273 phy-mode = "mii";
275 phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
276 phy-reset-duration = <1>;
277 phy-supply = <&vgen3_reg>;
278 phy-handle = <ðphy>;
281 #address-cells = <1>;
282 #size-cells = <0>;
284 ethphy: ethernet-phy@0 {
286 max-speed = <100>;
292 pinctrl-names = "default";
293 pinctrl-0 = <&pinctrl_i2c2>;
304 pinctrl-names = "default";
305 pinctrl-0 = <&pinctrl_uart1>;
310 pinctrl-names = "default";
311 pinctrl-0 = <&pinctrl_uart3>;
314 rave-sp {
315 compatible = "zii,rave-sp-mezz";
316 current-speed = <57600>;
317 #address-cells = <1>;
318 #size-cells = <1>;
321 compatible = "zii,rave-sp-watchdog-legacy";
325 compatible = "zii,rave-sp-eeprom";
327 #address-cells = <1>;
328 #size-cells = <1>;
329 zii,eeprom-name = "main-eeprom";
336 disable-over-current;
338 vbus-supply = <&usb_vbus>;
343 vcc-supply = <&vusb2_reg>;