Lines Matching +full:uart +full:- +full:has +full:- +full:rtscts
1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include "imx51-eukrea-cpuimx51.dtsi"
8 #include <dt-bindings/gpio/gpio.h>
16 compatible = "fixed-clock";
17 #clock-cells = <0>;
18 clock-frequency = <24000000>;
23 compatible = "gpio-keys";
24 pinctrl-names = "default";
25 pinctrl-0 = <&pinctrl_gpiokeys_1>;
27 button-1 {
31 wakeup-source;
32 linux,input-type = <1>;
37 compatible = "gpio-leds";
38 pinctrl-names = "default";
39 pinctrl-0 = <&pinctrl_gpioled>;
44 linux,default-trigger = "heartbeat";
49 compatible = "simple-bus";
50 #address-cells = <1>;
51 #size-cells = <0>;
54 compatible = "regulator-fixed";
56 regulator-name = "CAN_RST";
57 regulator-min-microvolt = <3300000>;
58 regulator-max-microvolt = <3300000>;
60 startup-delay-us = <20000>;
61 enable-active-high;
66 compatible = "eukrea,asoc-tlv320";
67 eukrea,model = "imx51-eukrea-tlv320aic23";
68 ssi-controller = <&ssi2>;
69 fsl,mux-int-port = <2>;
70 fsl,mux-ext-port = <3>;
74 compatible = "usb-nop-xceiv";
76 clock-names = "main_clk";
77 clock-frequency = <19200000>;
78 #phy-cells = <0>;
83 pinctrl-names = "default";
84 pinctrl-0 = <&pinctrl_audmux>;
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_esdhc1 &pinctrl_esdhc1_cd>;
91 cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_ecspi1>;
98 cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_can>;
107 spi-max-frequency = <10000000>;
108 interrupt-parent = <&gpio1>;
110 vdd-supply = <®_can>;
122 imx51-eukrea {
181 pinctrl_backlight_1: backlightgrp-1 {
193 pinctrl_gpiokeys_1: gpiokeysgrp-1 {
199 pinctrl_gpioled: gpioledgrp-1 {
228 pinctrl_usbh1_vbus: usbh1-vbusgrp {
237 codec-handle = <&tlv320aic23>;
242 pinctrl-names = "default";
243 pinctrl-0 = <&pinctrl_uart1>;
244 uart-has-rtscts;
249 pinctrl-names = "default";
250 pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
251 uart-has-rtscts;
256 pinctrl-names = "default";
257 pinctrl-0 = <&pinctrl_usbh1>;
271 pinctrl-names = "default";
272 pinctrl-0 = <&pinctrl_usbh1_vbus>;
273 reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;