Lines Matching +full:uart +full:- +full:has +full:- +full:rtscts

1 // SPDX-License-Identifier: GPL-2.0+
3 // Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
5 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
14 	compatible = "logicpd,imx31-lite", "fsl,imx31";
17 		stdout-path = &uart1;
26 		compatible = "gpio-leds";
43 	nand-bus-width = <8>;
44 	nand-ecc-mode = "hw";
45 	nand-on-flash-bbt;
50 	bus-width = <4>;
51 	cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
52 	wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
62 		spi-cs-high;
63 		spi-max-frequency = <1000000>;
64 		interrupt-parent = <&gpio1>;
67 		fsl,mc13xxx-uses-adc;
68 		fsl,mc13xxx-uses-rtc;
72 				regulator-min-microvolt = <1200000>;
73 				regulator-max-microvolt = <1500000>;
74 				regulator-always-on;
75 				regulator-boot-on;
79 				regulator-min-microvolt = <1200000>;
80 				regulator-max-microvolt = <1500000>;
81 				regulator-always-on;
82 				regulator-boot-on;
86 				regulator-min-microvolt = <1800000>;
87 				regulator-max-microvolt = <1800000>;
88 				regulator-always-on;
89 				regulator-boot-on;
93 				regulator-min-microvolt = <1800000>;
94 				regulator-max-microvolt = <1800000>;
95 				regulator-always-on;
96 				regulator-boot-on;
100 				regulator-min-microvolt = <1800000>;
101 				regulator-max-microvolt = <1800000>;
102 				regulator-always-on;
103 				regulator-boot-on;
107 				regulator-min-microvolt = <2775000>;
108 				regulator-max-microvolt = <2775000>;
109 				regulator-always-on;
110 				regulator-boot-on;
114 				regulator-min-microvolt = <2775000>;
115 				regulator-max-microvolt = <2775000>;
119 				regulator-min-microvolt = <2800000>;
120 				regulator-max-microvolt = <2800000>;
124 				regulator-min-microvolt = <2775000>;
125 				regulator-max-microvolt = <2775000>;
126 				regulator-always-on;
127 				regulator-boot-on;
131 				regulator-min-microvolt = <1600000>;
132 				regulator-max-microvolt = <3000000>;
133 				regulator-always-on;
134 				regulator-boot-on;
141 	uart-has-rtscts;
147 	uart-has-rtscts;
153 	uart-has-rtscts;
161 		compatible = "cfi-flash";
163 		bank-width = <2>;
164 		linux,mtd-name = "physmap-flash.0";
165 		fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>;
171 		interrupt-parent = <&gpio1>;
173 		phy-mode = "mii";
174 		reg-io-width = <2>;
175 		smsc,irq-push-pull;
176 		fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>;