Lines Matching +full:imx28 +full:- +full:i2c

1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
7 #include "imx28.dtsi"
11 	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
21 				pinctrl-names = "default";
22 				pinctrl-0 = <&hog_pins_a>;
24 				hog_pins_a: hog-gpios@0 {
26 					fsl,pinmux-ids = <
31 					fsl,drive-strength = <MXS_DRIVE_4mA>;
33 					fsl,pull-up = <MXS_PULL_DISABLE>;
39 				compatible = "fsl,imx28-mmc";
40 				pinctrl-names = "default";
41 				pinctrl-0 = <&mmc0_4bit_pins_a>;
42 				bus-width = <4>;
47 				#address-cells = <1>;
48 				#size-cells = <0>;
49 				compatible = "fsl,imx28-spi";
50 				pinctrl-names = "default";
51 				pinctrl-0 = <&spi2_pins_a>;
55 					#address-cells = <1>;
56 					#size-cells = <1>;
58 					spi-max-frequency = <40000000>;
65 			i2c0: i2c@80058000 {
66 				pinctrl-names = "default";
67 				pinctrl-0 = <&i2c0_pins_a>;
83 				pinctrl-names = "default";
84 				pinctrl-0 = <&duart_pins_a>;
93 				pinctrl-names = "default";
94 				pinctrl-0 = <&auart0_pins_a>;
102 			vbus-supply = <&reg_usb0_vbus>;
103 			pinctrl-names = "default";
104 			pinctrl-0 = <&usb0_pins_b>;
109 			phy-mode = "rmii";
110 			pinctrl-names = "default";
111 			pinctrl-0 = <&mac0_pins_a>;
116 			phy-mode = "rmii";
117 			pinctrl-names = "default";
118 			pinctrl-0 = <&mac1_pins_a>;
124 		compatible = "simple-bus";
125 		#address-cells = <1>;
126 		#size-cells = <0>;
129 			compatible = "regulator-fixed";
131 			regulator-name = "usb0_vbus";
132 			regulator-min-microvolt = <5000000>;
133 			regulator-max-microvolt = <5000000>;
139 		#address-cells = <1>;
140 		#size-cells = <0>;
141 		compatible = "gpio-leds";
145 			label = "sps1-1:yellow:user";
147 			linux,default-trigger = "heartbeat";
152 			label = "sps1-2:red:user";
154 			linux,default-trigger = "heartbeat";
159 			label = "sps1-3:red:user";
161 			default-trigger = "heartbeat";