Lines Matching +full:uart +full:- +full:has +full:- +full:rtscts
1 // SPDX-License-Identifier: GPL-2.0-or-later
6 #include "imx27-eukrea-cpuimx27.dtsi"
10 compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
12 display0: CMO-QVGA {
13 model = "CMO-QVGA";
14 bits-per-pixel = <16>;
17 display-timings {
18 native-mode = <&timing0>;
20 clock-frequency = <6500000>;
23 hback-porch = <20>;
24 hsync-len = <30>;
25 hfront-porch = <38>;
26 vback-porch = <4>;
27 vsync-len = <3>;
28 vfront-porch = <15>;
34 compatible = "gpio-backlight";
35 pinctrl-names = "default";
36 pinctrl-0 = <&pinctrl_backlight>;
41 compatible = "gpio-leds";
42 pinctrl-names = "default";
43 pinctrl-0 = <&pinctrl_gpioleds>;
48 linux,default-trigger = "heartbeat";
58 #address-cells = <1>;
59 #size-cells = <0>;
60 compatible = "simple-bus";
63 pinctrl-names = "default";
64 pinctrl-0 = <&pinctrl_lcdreg>;
65 compatible = "regulator-fixed";
67 regulator-name = "LCD";
68 regulator-min-microvolt = <5000000>;
69 regulator-max-microvolt = <5000000>;
71 enable-active-high;
77 pinctrl-0 = <&pinctrl_cspi1>;
78 cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
83 pinctrl-names = "default";
84 pinctrl-0 = <&pinctrl_touch>;
87 spi-cpol;
88 spi-max-frequency = <1500000>;
89 ti,keep-vref-on;
94 pinctrl-names = "default";
95 pinctrl-0 = <&pinctrl_imxfb>;
97 lcd-supply = <®_lcd>;
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_sdhc1>;
124 bus-width = <4>;
129 pinctrl-names = "default";
130 pinctrl-0 = <&pinctrl_ssi1>;
131 codec-handle = <&codec>;
136 uart-has-rtscts;
137 pinctrl-names = "default";
138 pinctrl-0 = <&pinctrl_uart1>;
143 uart-has-rtscts;
144 pinctrl-names = "default";
145 pinctrl-0 = <&pinctrl_uart2>;
150 uart-has-rtscts;
151 pinctrl-names = "default";
152 pinctrl-0 = <&pinctrl_uart3>;
157 imx27-eukrea-cpuimx27-baseboard {