Lines Matching +full:battery +full:- +full:detect +full:- +full:gpios
1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/clock/maxim,max77686.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/sound/samsung-i2s.h>
27 stdout-path = "serial3:115200n8";
30 gpio-keys {
31 compatible = "gpio-keys";
32 pinctrl-names = "default";
33 pinctrl-0 = <&power_key_irq &lid_irq>;
37 gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
39 wakeup-source;
42 lid-switch {
44 gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
45 linux,input-type = <5>; /* EV_SW */
47 debounce-interval = <1>;
48 wakeup-source;
52 vbat: vbat-fixed-regulator {
53 compatible = "regulator-fixed";
54 regulator-name = "vbat-supply";
55 regulator-boot-on;
58 i2c-arbitrator {
59 compatible = "i2c-arb-gpio-challenge";
60 #address-cells = <1>;
61 #size-cells = <0>;
63 i2c-parent = <&i2c_4>;
65 our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
66 their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
67 slew-delay-us = <10>;
68 wait-retry-us = <3000>;
69 wait-free-us = <50000>;
71 pinctrl-names = "default";
72 pinctrl-0 = <&arb_our_claim &arb_their_claim>;
77 #address-cells = <1>;
78 #size-cells = <0>;
80 battery: sbs-battery@b { label
81 compatible = "sbs,sbs-battery";
83 sbs,poll-retry-count = <1>;
86 cros_ec: embedded-controller@1e {
87 compatible = "google,cros-ec-i2c";
90 interrupt-parent = <&gpx1>;
91 pinctrl-names = "default";
92 pinctrl-0 = <&ec_irq>;
93 wakeup-source;
96 power-regulator@48 {
104 pinctrl-names = "default";
105 pinctrl-0 = <&tps65090_irq>;
107 vsys1-supply = <&vbat>;
108 vsys2-supply = <&vbat>;
109 vsys3-supply = <&vbat>;
110 infet1-supply = <&vbat>;
111 infet2-supply = <&vbat>;
112 infet3-supply = <&vbat>;
113 infet4-supply = <&vbat>;
114 infet5-supply = <&vbat>;
115 infet6-supply = <&vbat>;
116 infet7-supply = <&vbat>;
117 vsys-l1-supply = <&vbat>;
118 vsys-l2-supply = <&vbat>;
122 ti,enable-ext-control;
125 ti,enable-ext-control;
128 ti,enable-ext-control;
131 regulator-name = "vcd_led";
132 ti,overcurrent-wait = <3>;
135 regulator-name = "video_mid";
136 regulator-always-on;
137 ti,overcurrent-wait = <3>;
140 regulator-name = "wwan_r";
141 regulator-always-on;
142 ti,overcurrent-wait = <3>;
145 regulator-name = "sdcard";
146 ti,overcurrent-wait = <3>;
149 regulator-name = "camout";
150 regulator-always-on;
151 ti,overcurrent-wait = <3>;
154 regulator-name = "lcd_vdd";
155 ti,overcurrent-wait = <3>;
158 regulator-name = "video_mid_1a";
159 regulator-always-on;
160 ti,overcurrent-wait = <3>;
169 compatible = "ti,tps65090-charger";
176 samsung,i2s-controller = <&i2s0>;
179 usb3_vbus_reg: regulator-usb3 {
180 compatible = "regulator-fixed";
181 regulator-name = "P5.0V_USB3CON";
182 regulator-min-microvolt = <5000000>;
183 regulator-max-microvolt = <5000000>;
185 pinctrl-names = "default";
186 pinctrl-0 = <&usb3_vbus_en>;
187 enable-active-high;
190 fixed-rate-clocks {
192 compatible = "samsung,clock-xxti";
193 clock-frequency = <24000000>;
198 compatible = "pwm-backlight";
200 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
201 default-brightness-level = <7>;
202 enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
203 power-supply = <&fet1>;
204 pinctrl-0 = <&pwm0_out>;
205 pinctrl-names = "default";
210 power-supply = <&fet6>;
215 remote-endpoint = <&bridge_out>;
221 compatible = "mmc-pwrseq-simple";
222 reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
225 clock-names = "ext_clock";
230 assigned-clocks = <&clock CLK_FOUT_EPLL>;
231 assigned-clock-rates = <49152000>;
235 assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
236 assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
240 cpu0-supply = <&buck2_reg>;
245 pinctrl-names = "default";
246 pinctrl-0 = <&dp_hpd>;
247 samsung,color-space = <0>;
248 samsung,color-depth = <1>;
249 samsung,link-rate = <0x0a>;
250 samsung,lane-count = <2>;
251 hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
256 remote-endpoint = <&bridge_in>;
263 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
268 samsung,invert-vclk;
273 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
274 pinctrl-names = "default";
275 pinctrl-0 = <&hdmi_hpd_irq>;
277 hdmi-en-supply = <&tps65090_fet7>;
278 vdd-supply = <&ldo8_reg>;
279 vdd_osc-supply = <&ldo10_reg>;
280 vdd_pll-supply = <&ldo8_reg>;
289 samsung,i2c-sda-delay = <100>;
290 samsung,i2c-max-bus-freq = <378000>;
294 interrupt-parent = <&gpx3>;
296 pinctrl-names = "default";
297 pinctrl-0 = <&max77686_irq>;
298 wakeup-source;
300 #clock-cells = <1>;
302 voltage-regulators {
304 regulator-name = "P1.0V_LDO_OUT1";
305 regulator-min-microvolt = <1000000>;
306 regulator-max-microvolt = <1000000>;
307 regulator-always-on;
311 regulator-name = "P1.8V_LDO_OUT2";
312 regulator-min-microvolt = <1800000>;
313 regulator-max-microvolt = <1800000>;
314 regulator-always-on;
318 regulator-name = "P1.8V_LDO_OUT3";
319 regulator-min-microvolt = <1800000>;
320 regulator-max-microvolt = <1800000>;
321 regulator-always-on;
325 regulator-name = "P1.1V_LDO_OUT7";
326 regulator-min-microvolt = <1100000>;
327 regulator-max-microvolt = <1100000>;
328 regulator-always-on;
332 regulator-name = "P1.0V_LDO_OUT8";
333 regulator-min-microvolt = <1000000>;
334 regulator-max-microvolt = <1000000>;
335 regulator-always-on;
339 regulator-name = "P1.8V_LDO_OUT10";
340 regulator-min-microvolt = <1800000>;
341 regulator-max-microvolt = <1800000>;
342 regulator-always-on;
346 regulator-name = "P3.0V_LDO_OUT12";
347 regulator-min-microvolt = <3000000>;
348 regulator-max-microvolt = <3000000>;
349 regulator-always-on;
353 regulator-name = "P1.8V_LDO_OUT14";
354 regulator-min-microvolt = <1800000>;
355 regulator-max-microvolt = <1800000>;
356 regulator-always-on;
360 regulator-name = "P1.0V_LDO_OUT15";
361 regulator-min-microvolt = <1000000>;
362 regulator-max-microvolt = <1000000>;
363 regulator-always-on;
367 regulator-name = "P1.8V_LDO_OUT16";
368 regulator-min-microvolt = <1800000>;
369 regulator-max-microvolt = <1800000>;
370 regulator-always-on;
374 regulator-name = "vdd_mif";
375 regulator-min-microvolt = <950000>;
376 regulator-max-microvolt = <1300000>;
377 regulator-always-on;
378 regulator-boot-on;
382 regulator-name = "vdd_arm";
383 regulator-min-microvolt = <850000>;
384 regulator-max-microvolt = <1350000>;
385 regulator-always-on;
386 regulator-boot-on;
390 regulator-name = "vdd_int";
391 regulator-min-microvolt = <900000>;
392 regulator-max-microvolt = <1200000>;
393 regulator-always-on;
394 regulator-boot-on;
398 regulator-name = "vdd_g3d";
399 regulator-min-microvolt = <850000>;
400 regulator-max-microvolt = <1300000>;
401 regulator-always-on;
402 regulator-boot-on;
406 regulator-name = "P1.8V_BUCK_OUT5";
407 regulator-min-microvolt = <1800000>;
408 regulator-max-microvolt = <1800000>;
409 regulator-always-on;
410 regulator-boot-on;
414 regulator-name = "P1.35V_BUCK_OUT6";
415 regulator-min-microvolt = <1350000>;
416 regulator-max-microvolt = <1350000>;
417 regulator-always-on;
421 regulator-name = "P2.0V_BUCK_OUT7";
422 regulator-min-microvolt = <2000000>;
423 regulator-max-microvolt = <2000000>;
424 regulator-always-on;
428 regulator-name = "P2.85V_BUCK_OUT8";
429 regulator-min-microvolt = <2850000>;
430 regulator-max-microvolt = <2850000>;
431 regulator-always-on;
439 samsung,i2c-sda-delay = <100>;
440 samsung,i2c-max-bus-freq = <378000>;
446 interrupt-parent = <&gpx1>;
447 wakeup-source;
453 * double-pulling gets us out of spec in some cases.
456 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
462 samsung,i2c-sda-delay = <100>;
463 samsung,i2c-max-bus-freq = <66000>;
468 samsung,i2c-sda-delay = <100>;
469 samsung,i2c-max-bus-freq = <66000>;
474 samsung,i2c-sda-delay = <100>;
475 samsung,i2c-max-bus-freq = <66000>;
480 samsung,i2c-sda-delay = <100>;
481 samsung,i2c-max-bus-freq = <66000>;
486 samsung,i2c-sda-delay = <100>;
487 samsung,i2c-max-bus-freq = <66000>;
489 ptn3460: lvds-bridge@20 {
492 powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
493 reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
494 edid-emulation = <5>;
497 #address-cells = <1>;
498 #size-cells = <0>;
504 remote-endpoint = <&panel_in>;
512 remote-endpoint = <&dp_out>;
522 samsung,i2c-sda-delay = <100>;
523 samsung,i2c-max-bus-freq = <378000>;
527 assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
528 assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
533 mali-supply = <&buck4_reg>;
544 non-removable;
545 samsung,dw-mshc-ciu-div = <3>;
546 samsung,dw-mshc-sdr-timing = <2 3>;
547 samsung,dw-mshc-ddr-timing = <1 2>;
548 pinctrl-names = "default";
549 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
550 bus-width = <8>;
551 cap-mmc-highspeed;
557 card-detect-delay = <200>;
558 samsung,dw-mshc-ciu-div = <3>;
559 samsung,dw-mshc-sdr-timing = <2 3>;
560 samsung,dw-mshc-ddr-timing = <1 2>;
561 pinctrl-names = "default";
562 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
563 bus-width = <4>;
564 wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
565 cap-sd-highspeed;
576 non-removable;
577 cap-sdio-irq;
578 keep-power-in-suspend;
579 samsung,dw-mshc-ciu-div = <3>;
580 samsung,dw-mshc-sdr-timing = <2 3>;
581 samsung,dw-mshc-ddr-timing = <1 2>;
582 pinctrl-names = "default";
583 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
584 bus-width = <4>;
585 cap-sd-highspeed;
586 mmc-pwrseq = <&mmc3_pwrseq>;
590 wifi_en: wifi-en {
591 samsung,pins = "gpx0-1";
592 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
593 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
594 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
597 wifi_rst: wifi-rst {
598 samsung,pins = "gpx0-2";
599 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
600 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
601 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
604 power_key_irq: power-key-irq {
605 samsung,pins = "gpx1-3";
606 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
607 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
608 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
611 ec_irq: ec-irq {
612 samsung,pins = "gpx1-6";
613 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
614 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
615 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
618 tps65090_irq: tps65090-irq {
619 samsung,pins = "gpx2-6";
620 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
621 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
622 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
625 usb3_vbus_en: usb3-vbus-en {
626 samsung,pins = "gpx2-7";
627 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
628 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
629 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
632 max77686_irq: max77686-irq {
633 samsung,pins = "gpx3-2";
634 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
635 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
636 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
639 lid_irq: lid-irq {
640 samsung,pins = "gpx3-5";
641 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
642 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
643 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
646 hdmi_hpd_irq: hdmi-hpd-irq {
647 samsung,pins = "gpx3-7";
648 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
649 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
650 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
655 arb_their_claim: arb-their-claim {
656 samsung,pins = "gpe0-4";
657 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
658 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
659 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
662 arb_our_claim: arb-our-claim {
663 samsung,pins = "gpf0-3";
664 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
665 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
666 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
671 assigned-clocks = <&pmu_system_controller 0>;
672 assigned-clock-parents = <&clock CLK_FIN_PLL>;
678 clock-names = "rtc", "rtc_src";
682 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
686 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
690 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
691 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
696 samsung,spi-src-clk = <0>;
697 num-cs = <1>;
698 cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
706 vbus-supply = <&usb3_vbus_reg>;
709 #include "cros-ec-keyboard.dtsi"