Lines Matching +full:always +full:- +full:on
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/clock/samsung,s2mps11.h>
14 #include <dt-bindings/sound/samsung-i2s.h>
18 model = "Insignal Arndale evaluation board based on Exynos5250";
27 stdout-path = "serial2:115200n8";
31 compatible = "gpio-keys";
34 label = "SW-TACT2";
37 wakeup-source;
41 label = "SW-TACT3";
44 wakeup-source;
48 label = "SW-TACT4";
51 wakeup-source;
55 label = "SW-TACT5";
58 wakeup-source;
62 label = "SW-TACT6";
65 wakeup-source;
69 label = "SW-TACT7";
72 wakeup-source;
77 compatible = "boe,hv070wsa-100";
78 power-supply = <&vcc_3v3_reg>;
79 enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
82 remote-endpoint = <&bridge_out_ep>;
87 main_dc_reg: regulator-0 {
88 compatible = "regulator-fixed";
89 regulator-name = "MAIN_DC";
90 regulator-always-on;
93 mmc_reg: regulator-1 {
94 compatible = "regulator-fixed";
95 regulator-name = "VDD_MMC";
96 regulator-min-microvolt = <2800000>;
97 regulator-max-microvolt = <2800000>;
98 regulator-always-on;
101 reg_hdmi_en: regulator-2 {
102 compatible = "regulator-fixed";
103 regulator-name = "hdmi-en";
104 regulator-always-on;
107 vcc_1v2_reg: regulator-3 {
108 compatible = "regulator-fixed";
109 regulator-name = "VCC_1V2";
110 regulator-min-microvolt = <1200000>;
111 regulator-max-microvolt = <1200000>;
112 regulator-always-on;
115 vcc_1v8_reg: regulator-4 {
116 compatible = "regulator-fixed";
117 regulator-name = "VCC_1V8";
118 regulator-min-microvolt = <1800000>;
119 regulator-max-microvolt = <1800000>;
120 regulator-always-on;
123 vcc_3v3_reg: regulator-5 {
124 compatible = "regulator-fixed";
125 regulator-name = "VCC_3V3";
126 regulator-min-microvolt = <3300000>;
127 regulator-max-microvolt = <3300000>;
128 regulator-always-on;
132 compatible = "samsung,arndale-wm1811";
133 samsung,audio-cpu = <&i2s0>;
134 samsung,audio-codec = <&wm1811>;
137 fixed-rate-clocks {
139 compatible = "samsung,clock-xxti";
140 clock-frequency = <24000000>;
145 usb_hub: usb-hub {
148 reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
149 connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>;
154 assigned-clocks = <&clock CLK_FOUT_EPLL>;
155 assigned-clock-rates = <49152000>;
159 assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
160 assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
164 cpu0-supply = <&buck2_reg>;
168 vddcore-supply = <&ldo8_reg>;
169 vddio-supply = <&ldo10_reg>;
170 samsung,pll-clock-frequency = <24000000>;
171 samsung,burst-clock-frequency = <320000000>;
172 samsung,esc-clock-frequency = <10000000>;
178 vddc-supply = <&vcc_1v2_reg>;
179 vddio-supply = <&vcc_1v8_reg>;
180 vddlvds-supply = <&vcc_3v3_reg>;
181 reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
182 #address-cells = <1>;
183 #size-cells = <0>;
187 remote-endpoint = <&panel_ep>;
198 pinctrl-names = "default";
199 pinctrl-0 = <&hdmi_hpd>;
202 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
203 vdd_osc-supply = <&ldo10_reg>;
204 vdd_pll-supply = <&ldo8_reg>;
205 vdd-supply = <&ldo8_reg>;
210 samsung,i2c-sda-delay = <100>;
211 samsung,i2c-max-bus-freq = <20000>;
212 samsung,i2c-slave-addr = <0x66>;
215 compatible = "samsung,s5m8767-pmic";
217 interrupt-parent = <&gpx3>;
219 pinctrl-names = "default";
220 pinctrl-0 = <&s5m8767_irq>;
222 vinb1-supply = <&main_dc_reg>;
223 vinb2-supply = <&main_dc_reg>;
224 vinb3-supply = <&main_dc_reg>;
225 vinb4-supply = <&main_dc_reg>;
226 vinb5-supply = <&main_dc_reg>;
227 vinb6-supply = <&main_dc_reg>;
228 vinb7-supply = <&main_dc_reg>;
229 vinb8-supply = <&main_dc_reg>;
230 vinb9-supply = <&main_dc_reg>;
232 vinl1-supply = <&buck7_reg>;
233 vinl2-supply = <&buck7_reg>;
234 vinl3-supply = <&buck7_reg>;
235 vinl4-supply = <&main_dc_reg>;
236 vinl5-supply = <&main_dc_reg>;
237 vinl6-supply = <&main_dc_reg>;
238 vinl7-supply = <&main_dc_reg>;
239 vinl8-supply = <&buck8_reg>;
240 vinl9-supply = <&buck8_reg>;
242 s5m8767,pmic-buck2-dvs-voltage = <1300000>;
243 s5m8767,pmic-buck3-dvs-voltage = <1100000>;
244 s5m8767,pmic-buck4-dvs-voltage = <1200000>;
245 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
248 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
253 compatible = "samsung,s5m8767-clk";
254 #clock-cells = <1>;
255 clock-output-names = "s5m8767_ap", "unused1", "unused2";
260 regulator-name = "VDD_ALIVE_1.0V";
261 regulator-min-microvolt = <1100000>;
262 regulator-max-microvolt = <1100000>;
263 regulator-always-on;
264 regulator-boot-on;
269 regulator-name = "VDD_28IO_DP_1.35V";
270 regulator-min-microvolt = <1200000>;
271 regulator-max-microvolt = <1200000>;
272 regulator-always-on;
273 regulator-boot-on;
278 regulator-name = "VDD_COMMON1_1.8V";
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <1800000>;
281 regulator-always-on;
282 regulator-boot-on;
287 regulator-name = "VDD_IOPERI_1.8V";
288 regulator-min-microvolt = <1800000>;
289 regulator-max-microvolt = <1800000>;
290 regulator-always-on;
295 regulator-name = "VDD_EXT_1.8V";
296 regulator-min-microvolt = <1800000>;
297 regulator-max-microvolt = <1800000>;
298 regulator-always-on;
299 regulator-boot-on;
304 regulator-name = "VDD_MPLL_1.1V";
305 regulator-min-microvolt = <1100000>;
306 regulator-max-microvolt = <1100000>;
307 regulator-always-on;
308 regulator-boot-on;
313 regulator-name = "VDD_XPLL_1.1V";
314 regulator-min-microvolt = <1100000>;
315 regulator-max-microvolt = <1100000>;
316 regulator-always-on;
317 regulator-boot-on;
322 regulator-name = "VDD_COMMON2_1.0V";
323 regulator-min-microvolt = <1000000>;
324 regulator-max-microvolt = <1000000>;
325 regulator-always-on;
326 regulator-boot-on;
331 regulator-name = "VDD_33ON_3.0V";
332 regulator-min-microvolt = <3000000>;
333 regulator-max-microvolt = <3000000>;
338 regulator-name = "VDD_COMMON3_1.8V";
339 regulator-min-microvolt = <1800000>;
340 regulator-max-microvolt = <1800000>;
341 regulator-always-on;
342 regulator-boot-on;
347 regulator-name = "VDD_ABB2_1.8V";
348 regulator-min-microvolt = <1800000>;
349 regulator-max-microvolt = <1800000>;
350 regulator-always-on;
351 regulator-boot-on;
356 regulator-name = "VDD_USB_3.0V";
357 regulator-min-microvolt = <3000000>;
358 regulator-max-microvolt = <3000000>;
359 regulator-always-on;
360 regulator-boot-on;
365 regulator-name = "VDDQ_C2C_W_1.8V";
366 regulator-min-microvolt = <1800000>;
367 regulator-max-microvolt = <1800000>;
368 regulator-always-on;
369 regulator-boot-on;
374 regulator-name = "VDD18_ABB0_3_1.8V";
375 regulator-min-microvolt = <1800000>;
376 regulator-max-microvolt = <1800000>;
377 regulator-always-on;
378 regulator-boot-on;
383 regulator-name = "VDD10_COMMON4_1.0V";
384 regulator-min-microvolt = <1000000>;
385 regulator-max-microvolt = <1000000>;
386 regulator-always-on;
387 regulator-boot-on;
392 regulator-name = "VDD18_HSIC_1.8V";
393 regulator-min-microvolt = <1800000>;
394 regulator-max-microvolt = <1800000>;
395 regulator-always-on;
396 regulator-boot-on;
401 regulator-name = "VDDQ_MMC2_3_2.8V";
402 regulator-min-microvolt = <2800000>;
403 regulator-max-microvolt = <2800000>;
404 regulator-always-on;
405 regulator-boot-on;
410 regulator-name = "VDD_33ON_2.8V";
411 regulator-min-microvolt = <2800000>;
412 regulator-max-microvolt = <2800000>;
417 regulator-name = "EXT_33_OFF";
418 regulator-min-microvolt = <3300000>;
419 regulator-max-microvolt = <3300000>;
424 regulator-name = "EXT_28_OFF";
425 regulator-min-microvolt = <2800000>;
426 regulator-max-microvolt = <2800000>;
431 regulator-name = "PVDD_LDO25";
432 regulator-min-microvolt = <1200000>;
433 regulator-max-microvolt = <1200000>;
438 regulator-name = "EXT_18_OFF";
439 regulator-min-microvolt = <1800000>;
440 regulator-max-microvolt = <1800000>;
445 regulator-name = "VDD_MIF";
446 regulator-min-microvolt = <950000>;
447 regulator-max-microvolt = <1200000>;
448 regulator-always-on;
449 regulator-boot-on;
454 regulator-name = "VDD_ARM";
455 regulator-min-microvolt = <912500>;
456 regulator-max-microvolt = <1300000>;
457 regulator-always-on;
458 regulator-boot-on;
463 regulator-name = "VDD_INT";
464 regulator-min-microvolt = <900000>;
465 regulator-max-microvolt = <1200000>;
466 regulator-always-on;
467 regulator-boot-on;
472 regulator-name = "VDD_G3D";
473 regulator-min-microvolt = <850000>;
474 regulator-max-microvolt = <1300000>;
475 regulator-always-on;
476 regulator-boot-on;
481 regulator-name = "VDD_MEM_1.35V";
482 regulator-min-microvolt = <750000>;
483 regulator-max-microvolt = <1355000>;
484 regulator-always-on;
485 regulator-boot-on;
490 regulator-name = "PVDD_BUCK7";
491 regulator-always-on;
496 regulator-name = "PVDD_BUCK8";
497 regulator-always-on;
502 regulator-name = "VDD_33_OFF_EXT1";
503 regulator-min-microvolt = <750000>;
504 regulator-max-microvolt = <3000000>;
518 clock-names = "MCLK1";
520 AVDD2-supply = <&main_dc_reg>;
521 CPVDD-supply = <&main_dc_reg>;
522 DBVDD1-supply = <&main_dc_reg>;
523 DBVDD2-supply = <&main_dc_reg>;
524 DBVDD3-supply = <&main_dc_reg>;
525 LDO1VDD-supply = <&main_dc_reg>;
526 SPKVDD1-supply = <&main_dc_reg>;
527 SPKVDD2-supply = <&main_dc_reg>;
537 samsung,i2c-sda-delay = <100>;
538 samsung,i2c-max-bus-freq = <66000>;
543 samsung,i2c-sda-delay = <100>;
544 samsung,i2c-max-bus-freq = <40000>;
548 assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
549 assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
554 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
558 mali-supply = <&buck4_reg>;
568 broken-cd;
569 card-detect-delay = <200>;
570 samsung,dw-mshc-ciu-div = <3>;
571 samsung,dw-mshc-sdr-timing = <2 3>;
572 samsung,dw-mshc-ddr-timing = <1 2>;
573 vmmc-supply = <&mmc_reg>;
574 pinctrl-names = "default";
575 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
576 bus-width = <8>;
577 cap-mmc-highspeed;
582 card-detect-delay = <200>;
583 samsung,dw-mshc-ciu-div = <3>;
584 samsung,dw-mshc-sdr-timing = <2 3>;
585 samsung,dw-mshc-ddr-timing = <1 2>;
586 vmmc-supply = <&mmc_reg>;
587 pinctrl-names = "default";
588 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
589 bus-width = <4>;
590 disable-wp;
591 cap-sd-highspeed;
595 s5m8767_irq: s5m8767-irq {
596 samsung,pins = "gpx3-2";
597 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
603 clock-names = "rtc", "rtc_src";
613 samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
622 * For unknown reasons HDMI-DDC does not work with Exynos I2C
625 i2c_ddc: i2c-10 {
626 pinctrl-names = "default";
627 pinctrl-0 = <&i2c2_gpio_bus>;
629 compatible = "i2c-gpio";
630 sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
631 scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
632 i2c-gpio,delay-us = <2>;
633 #address-cells = <1>;
634 #size-cells = <0>;