Lines Matching +full:mipi +full:- +full:bias
1 // SPDX-License-Identifier: GPL-2.0
12 /dts-v1/;
14 #include "exynos4412-ppmu-common.dtsi"
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/input.h>
17 #include <dt-bindings/interrupt-controller/irq.h>
18 #include <dt-bindings/clock/maxim,max77686.h>
19 #include <dt-bindings/pinctrl/samsung.h>
30 stdout-path = &serial_2;
34 compatible = "samsung,secure-firmware";
38 fixed-rate-clocks {
40 compatible = "samsung,clock-xxti";
41 clock-frequency = <0>;
45 compatible = "samsung,clock-xusbxti";
46 clock-frequency = <24000000>;
50 cam_io_reg: voltage-regulator-1 {
51 compatible = "regulator-fixed";
52 regulator-name = "CAM_SENSOR_A";
53 regulator-min-microvolt = <2800000>;
54 regulator-max-microvolt = <2800000>;
55 enable-active-high;
59 cam_af_reg: voltage-regulator-2 {
60 compatible = "regulator-fixed";
61 regulator-name = "CAM_AF";
62 regulator-min-microvolt = <2800000>;
63 regulator-max-microvolt = <2800000>;
64 enable-active-high;
68 vsil12: voltage-regulator-3 {
69 compatible = "regulator-fixed";
70 regulator-name = "VSIL_1.2V";
71 regulator-min-microvolt = <1200000>;
72 regulator-max-microvolt = <1200000>;
74 enable-active-high;
75 vin-supply = <&buck7_reg>;
78 vcc33mhl: voltage-regulator-4 {
79 compatible = "regulator-fixed";
80 regulator-name = "VCC_3.3_MHL";
81 regulator-min-microvolt = <3300000>;
82 regulator-max-microvolt = <3300000>;
84 enable-active-high;
87 vcc18mhl: voltage-regulator-5 {
88 compatible = "regulator-fixed";
89 regulator-name = "VCC_1.8_MHL";
90 regulator-min-microvolt = <1800000>;
91 regulator-max-microvolt = <1800000>;
93 enable-active-high;
96 touchkey_reg: voltage-regulator-6 {
97 compatible = "regulator-fixed";
98 regulator-name = "LED_VDD_3.3V";
99 regulator-min-microvolt = <3300000>;
100 regulator-max-microvolt = <3300000>;
101 enable-active-high;
105 vbatt_reg: voltage-regulator-7 {
106 compatible = "regulator-fixed";
107 regulator-name = "VBATT";
108 regulator-min-microvolt = <5000000>;
109 regulator-max-microvolt = <5000000>;
110 regulator-always-on;
113 mic_bias_reg: voltage-regulator-8 {
114 compatible = "regulator-fixed";
115 regulator-name = "MICBIAS_LDO_2.8V";
116 regulator-min-microvolt = <2800000>;
117 regulator-max-microvolt = <2800000>;
119 enable-active-high;
122 submic_bias_reg: voltage-regulator-9 {
123 compatible = "regulator-fixed";
124 regulator-name = "SUB_MICBIAS_LDO_2.8V";
125 regulator-min-microvolt = <2800000>;
126 regulator-max-microvolt = <2800000>;
129 gpio-keys {
130 compatible = "gpio-keys";
131 pinctrl-names = "default";
132 pinctrl-0 = <&gpio_keys>;
134 key-down {
138 debounce-interval = <10>;
141 key-up {
145 debounce-interval = <10>;
148 key-power {
152 debounce-interval = <10>;
153 wakeup-source;
156 key-ok {
160 debounce-interval = <10>;
161 wakeup-source;
165 i2c_max77693: i2c-gpio-1 {
166 compatible = "i2c-gpio";
167 sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
168 scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
169 i2c-gpio,delay-us = <2>;
170 #address-cells = <1>;
171 #size-cells = <0>;
176 interrupt-parent = <&gpx1>;
178 pinctrl-names = "default";
179 pinctrl-0 = <&max77693_irq>;
184 regulator-name = "ESAFEOUT1";
187 regulator-name = "ESAFEOUT2";
190 regulator-name = "CHARGER";
191 regulator-min-microamp = <60000>;
192 regulator-max-microamp = <2580000>;
197 compatible = "maxim,max77693-haptic";
198 haptic-supply = <&ldo26_reg>;
203 compatible = "maxim,max77693-charger";
205 maxim,constant-microvolt = <4350000>;
206 maxim,min-system-microvolt = <3600000>;
207 maxim,thermal-regulation-celsius = <100>;
208 maxim,battery-overcurrent-microamp = <3500000>;
209 maxim,charge-input-threshold-microvolt = <4300000>;
214 i2c_max77693_fuel: i2c-gpio-3 {
215 compatible = "i2c-gpio";
216 sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
217 scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
218 i2c-gpio,delay-us = <2>;
219 #address-cells = <1>;
220 #size-cells = <0>;
223 max77693-fuel-gauge@36 {
225 interrupt-parent = <&gpx2>;
227 pinctrl-names = "default";
228 pinctrl-0 = <&max77693_fuel_irq>;
231 maxim,over-heat-temp = <700>;
232 maxim,over-volt = <4500>;
236 i2c-gpio-4 {
237 compatible = "i2c-gpio";
238 sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
239 scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
240 i2c-gpio,delay-us = <2>;
241 #address-cells = <1>;
242 #size-cells = <0>;
245 compatible = "cypress,midas-touchkey";
247 vdd-supply = <&touchkey_reg>;
248 vcc-supply = <&ldo5_reg>;
249 interrupt-parent = <&gpj0>;
255 i2c-mhl {
256 compatible = "i2c-gpio";
257 sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
258 scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
259 i2c-gpio,delay-us = <100>;
260 #address-cells = <1>;
261 #size-cells = <0>;
263 pinctrl-0 = <&i2c_mhl_bus>;
264 pinctrl-names = "default";
267 sii9234: hdmi-bridge@39 {
269 avcc33-supply = <&vcc33mhl>;
270 iovcc18-supply = <&vcc18mhl>;
271 avcc12-supply = <&vsil12>;
272 cvcc12-supply = <&vsil12>;
273 reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
274 interrupt-parent = <&gpf3>;
280 remote-endpoint = <&hdmi_to_mhl>;
286 wlan_pwrseq: sdhci3-pwrseq {
287 compatible = "mmc-pwrseq-simple";
288 reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
290 clock-names = "ext_clock";
294 compatible = "samsung,midas-audio";
296 mic-bias-supply = <&mic_bias_reg>;
297 submic-bias-supply = <&submic_bias_reg>;
300 sound-dai = <&i2s0 0>;
303 sound-dai = <&wm1811>;
307 thermistor-ap {
309 pullup-uv = <1800000>; /* VCC_1.8V_AP */
310 pullup-ohm = <100000>; /* 100K */
311 pulldown-ohm = <100000>; /* 100K */
312 io-channels = <&adc 1>; /* AP temperature */
315 thermistor-battery {
317 pullup-uv = <1800000>; /* VCC_1.8V_AP */
318 pullup-ohm = <100000>; /* 100K */
319 pulldown-ohm = <100000>; /* 100K */
320 io-channels = <&adc 2>; /* Battery temperature */
325 vdd-supply = <&ldo3_reg>;
330 devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
331 vdd-supply = <&buck1_reg>;
346 devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
347 vdd-supply = <&buck3_reg>;
377 pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
378 pinctrl-names = "default";
380 assigned-clocks = <&clock CLK_MOUT_CAM0>,
382 assigned-clock-parents = <&clock CLK_XUSBXTI>,
387 cpu0-supply = <&buck2_reg>;
391 cooling-maps {
394 cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
399 cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
407 vddcore-supply = <&ldo8_reg>;
408 vddio-supply = <&ldo10_reg>;
409 assigned-clocks = <&clock CLK_MOUT_CSIS0>,
411 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
412 assigned-clock-rates = <0>, <176000000>;
414 /* Camera C (3) MIPI CSI-2 (CSIS0) */
418 remote-endpoint = <&s5c73m3_ep>;
419 data-lanes = <1 2 3 4>;
420 samsung,csis-hs-settle = <12>;
427 vddcore-supply = <&ldo8_reg>;
428 vddio-supply = <&ldo10_reg>;
429 assigned-clocks = <&clock CLK_MOUT_CSIS1>,
431 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
432 assigned-clock-rates = <0>, <176000000>;
434 /* Camera D (4) MIPI CSI-2 (CSIS1) */
438 remote-endpoint = <&is_s5k6a3_ep>;
439 data-lanes = <1>;
440 samsung,csis-hs-settle = <18>;
441 samsung,csis-wclk;
447 vddcore-supply = <&ldo8_reg>;
448 vddio-supply = <&ldo10_reg>;
449 samsung,burst-clock-frequency = <500000000>;
450 samsung,esc-clock-frequency = <20000000>;
451 samsung,pll-clock-frequency = <24000000>;
455 vbus-supply = <&esafeout1_reg>;
461 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
463 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
464 assigned-clock-rates = <0>, <176000000>;
469 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
471 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
472 assigned-clock-rates = <0>, <176000000>;
477 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
479 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
480 assigned-clock-rates = <0>, <176000000>;
485 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
487 assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
488 assigned-clock-rates = <0>, <176000000>;
492 pinctrl-0 = <&fimc_is_uart>;
493 pinctrl-names = "default";
511 mali-supply = <&buck4_reg>;
516 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
517 pinctrl-names = "default";
518 pinctrl-0 = <&hdmi_hpd>;
519 vdd-supply = <&ldo3_reg>;
520 vdd_osc-supply = <&ldo4_reg>;
521 vdd_pll-supply = <&ldo3_reg>;
526 #address-cells = <1>;
527 #size-cells = <0>;
532 remote-endpoint = <&mhl_to_hdmi>;
539 vusb_d-supply = <&ldo15_reg>;
540 vusb_a-supply = <&ldo12_reg>;
546 samsung,i2c-sda-delay = <100>;
547 samsung,i2c-slave-addr = <0x10>;
548 samsung,i2c-max-bus-freq = <400000>;
549 pinctrl-0 = <&i2c0_bus>;
550 pinctrl-names = "default";
556 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
557 vdd-int-supply = <&buck9_reg>;
558 vddio-cis-supply = <&ldo9_reg>;
559 vddio-host-supply = <&ldo18_reg>;
560 vdd-af-supply = <&cam_af_reg>;
561 vdd-reg-supply = <&cam_io_reg>;
562 clock-frequency = <24000000>;
565 clock-names = "cis_extclk";
569 remote-endpoint = <&csis0_ep>;
570 data-lanes = <1 2 3 4>;
577 pinctrl-0 = <&fimc_is_i2c1>;
578 pinctrl-names = "default";
583 svdda-supply = <&cam_io_reg>;
584 svddio-supply = <&ldo19_reg>;
585 afvdd-supply = <&ldo19_reg>;
586 clock-frequency = <24000000>;
589 clock-names = "extclk";
590 samsung,camclk-out = <1>;
595 remote-endpoint = <&csis1_ep>;
596 data-lanes = <1>;
603 samsung,i2c-sda-delay = <100>;
604 samsung,i2c-slave-addr = <0x10>;
605 samsung,i2c-max-bus-freq = <400000>;
606 pinctrl-0 = <&i2c3_bus>;
607 pinctrl-names = "default";
612 samsung,i2c-sda-delay = <100>;
613 samsung,i2c-slave-addr = <0x10>;
614 samsung,i2c-max-bus-freq = <100000>;
615 pinctrl-0 = <&i2c4_bus>;
616 pinctrl-names = "default";
624 clock-names = "MCLK1", "MCLK2";
625 interrupt-controller;
626 #interrupt-cells = <2>;
627 interrupt-parent = <&gpx3>;
630 gpio-controller;
631 #gpio-cells = <2>;
632 #sound-dai-cells = <0>;
634 wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
636 wlf,micbias-cfg = <0x2f 0x2b>;
638 wlf,lineout1-feedback;
639 wlf,lineout1-se;
640 wlf,lineout2-se;
641 wlf,ldoena-always-driven;
643 AVDD2-supply = <&vbatt_reg>;
644 DBVDD1-supply = <&ldo3_reg>;
645 DBVDD2-supply = <&vbatt_reg>;
646 DBVDD3-supply = <&vbatt_reg>;
647 DCVDD-supply = <&ldo3_reg>;
648 CPVDD-supply = <&vbatt_reg>;
649 SPKVDD1-supply = <&vbatt_reg>;
650 SPKVDD2-supply = <&vbatt_reg>;
661 samsung,i2c-sda-delay = <100>;
662 samsung,i2c-slave-addr = <0x10>;
663 samsung,i2c-max-bus-freq = <100000>;
664 pinctrl-0 = <&i2c7_bus>;
665 pinctrl-names = "default";
670 interrupt-parent = <&gpx0>;
672 pinctrl-0 = <&max77686_irq>;
673 pinctrl-names = "default";
675 #clock-cells = <1>;
677 voltage-regulators {
679 regulator-name = "VALIVE_1.0V_AP";
680 regulator-min-microvolt = <1000000>;
681 regulator-max-microvolt = <1000000>;
682 regulator-always-on;
686 regulator-name = "VM1M2_1.2V_AP";
687 regulator-min-microvolt = <1200000>;
688 regulator-max-microvolt = <1200000>;
689 regulator-always-on;
690 regulator-state-mem {
691 regulator-on-in-suspend;
696 regulator-name = "VCC_1.8V_AP";
697 regulator-min-microvolt = <1800000>;
698 regulator-max-microvolt = <1800000>;
699 regulator-always-on;
703 regulator-name = "VCC_2.8V_AP";
704 regulator-min-microvolt = <2800000>;
705 regulator-max-microvolt = <2800000>;
706 regulator-always-on;
710 regulator-name = "VCC_1.8V_IO";
711 regulator-min-microvolt = <1800000>;
712 regulator-max-microvolt = <1800000>;
713 regulator-always-on;
717 regulator-name = "VMPLL_1.0V_AP";
718 regulator-min-microvolt = <1000000>;
719 regulator-max-microvolt = <1000000>;
720 regulator-always-on;
721 regulator-state-mem {
722 regulator-on-in-suspend;
727 regulator-name = "VPLL_1.0V_AP";
728 regulator-min-microvolt = <1000000>;
729 regulator-max-microvolt = <1000000>;
730 regulator-always-on;
731 regulator-state-mem {
732 regulator-on-in-suspend;
737 regulator-name = "VMIPI_1.0V";
738 regulator-min-microvolt = <1000000>;
739 regulator-max-microvolt = <1000000>;
740 regulator-state-mem {
741 regulator-off-in-suspend;
746 regulator-name = "CAM_ISP_MIPI_1.2V";
747 regulator-min-microvolt = <1200000>;
748 regulator-max-microvolt = <1200000>;
752 regulator-name = "VMIPI_1.8V";
753 regulator-min-microvolt = <1800000>;
754 regulator-max-microvolt = <1800000>;
755 regulator-state-mem {
756 regulator-off-in-suspend;
761 regulator-name = "VABB1_1.95V";
762 regulator-min-microvolt = <1950000>;
763 regulator-max-microvolt = <1950000>;
764 regulator-always-on;
765 regulator-state-mem {
766 regulator-off-in-suspend;
771 regulator-name = "VUOTG_3.0V";
772 regulator-min-microvolt = <3000000>;
773 regulator-max-microvolt = <3000000>;
774 regulator-state-mem {
775 regulator-off-in-suspend;
780 regulator-name = "NFC_AVDD_1.8V";
781 regulator-min-microvolt = <1800000>;
782 regulator-max-microvolt = <1800000>;
786 regulator-name = "VABB2_1.95V";
787 regulator-min-microvolt = <1950000>;
788 regulator-max-microvolt = <1950000>;
789 regulator-always-on;
790 regulator-state-mem {
791 regulator-off-in-suspend;
796 regulator-name = "VHSIC_1.0V";
797 regulator-min-microvolt = <1000000>;
798 regulator-max-microvolt = <1000000>;
799 regulator-state-mem {
800 regulator-on-in-suspend;
805 regulator-name = "VHSIC_1.8V";
806 regulator-min-microvolt = <1800000>;
807 regulator-max-microvolt = <1800000>;
808 regulator-state-mem {
809 regulator-on-in-suspend;
814 regulator-name = "CAM_SENSOR_CORE_1.2V";
815 regulator-min-microvolt = <1200000>;
816 regulator-max-microvolt = <1200000>;
820 regulator-name = "CAM_ISP_SEN_IO_1.8V";
821 regulator-min-microvolt = <1800000>;
822 regulator-max-microvolt = <1800000>;
826 regulator-name = "VT_CAM_1.8V";
827 regulator-min-microvolt = <1800000>;
828 regulator-max-microvolt = <1800000>;
832 regulator-name = "VDDQ_PRE_1.8V";
833 regulator-min-microvolt = <1800000>;
834 regulator-max-microvolt = <1800000>;
838 regulator-name = "VTF_2.8V";
839 regulator-min-microvolt = <2800000>;
840 regulator-max-microvolt = <2800000>;
841 maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
845 regulator-name = "VMEM_VDD_2.8V";
846 regulator-min-microvolt = <2800000>;
847 regulator-max-microvolt = <2800000>;
848 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
852 regulator-name = "TSP_AVDD_3.3V";
853 regulator-min-microvolt = <3300000>;
854 regulator-max-microvolt = <3300000>;
858 regulator-name = "TSP_VDD_1.8V";
859 regulator-min-microvolt = <1800000>;
860 regulator-max-microvolt = <1800000>;
864 regulator-name = "LDO25";
868 regulator-name = "MOTOR_VCC_3.0V";
869 regulator-min-microvolt = <3000000>;
870 regulator-max-microvolt = <3000000>;
874 regulator-name = "VDD_MIF";
875 regulator-min-microvolt = <850000>;
876 regulator-max-microvolt = <1100000>;
877 regulator-always-on;
878 regulator-boot-on;
879 regulator-state-mem {
880 regulator-off-in-suspend;
885 regulator-name = "VDD_ARM";
886 regulator-min-microvolt = <850000>;
887 regulator-max-microvolt = <1500000>;
888 regulator-always-on;
889 regulator-boot-on;
890 regulator-state-mem {
891 regulator-on-in-suspend;
896 regulator-name = "VDD_INT";
897 regulator-min-microvolt = <850000>;
898 regulator-max-microvolt = <1150000>;
899 regulator-always-on;
900 regulator-boot-on;
901 regulator-state-mem {
902 regulator-off-in-suspend;
907 regulator-name = "VDD_G3D";
908 regulator-min-microvolt = <850000>;
909 regulator-max-microvolt = <1150000>;
910 regulator-boot-on;
911 regulator-state-mem {
912 regulator-off-in-suspend;
917 regulator-name = "VMEM_1.2V_AP";
918 regulator-min-microvolt = <1200000>;
919 regulator-max-microvolt = <1200000>;
920 regulator-always-on;
924 regulator-name = "VCC_SUB_1.35V";
925 regulator-min-microvolt = <1350000>;
926 regulator-max-microvolt = <1350000>;
927 regulator-always-on;
931 regulator-name = "VCC_SUB_2.0V";
932 regulator-min-microvolt = <2000000>;
933 regulator-max-microvolt = <2000000>;
934 regulator-always-on;
938 regulator-name = "VMEM_VDDF_3.0V";
939 regulator-min-microvolt = <2850000>;
940 regulator-max-microvolt = <2850000>;
941 maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
945 regulator-name = "CAM_ISP_CORE_1.2V";
946 regulator-min-microvolt = <1000000>;
947 regulator-max-microvolt = <1200000>;
958 pinctrl-0 = <&i2s0_bus>;
959 pinctrl-names = "default";
968 broken-cd;
969 non-removable;
970 card-detect-delay = <200>;
971 vmmc-supply = <&ldo22_reg>;
972 clock-frequency = <400000000>;
973 samsung,dw-mshc-ciu-div = <0>;
974 samsung,dw-mshc-sdr-timing = <2 3>;
975 samsung,dw-mshc-ddr-timing = <1 2>;
976 pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
977 pinctrl-names = "default";
979 bus-width = <8>;
980 cap-mmc-highspeed;
984 assigned-clocks = <&pmu_system_controller 0>;
985 assigned-clock-parents = <&clock CLK_XUSBXTI>;
989 pinctrl-names = "default";
990 pinctrl-0 = <&sleep0>;
992 mhl_int: mhl-int {
993 samsung,pins = "gpf3-5";
994 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
997 i2c_mhl_bus: i2c-mhl-bus {
998 samsung,pins = "gpf0-4", "gpf0-6";
999 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
1000 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1001 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
1004 sleep0: sleep-states {
1005 PIN_SLP(gpa0-0, INPUT, NONE);
1006 PIN_SLP(gpa0-1, OUT0, NONE);
1007 PIN_SLP(gpa0-2, INPUT, NONE);
1008 PIN_SLP(gpa0-3, INPUT, UP);
1009 PIN_SLP(gpa0-4, INPUT, NONE);
1010 PIN_SLP(gpa0-5, INPUT, DOWN);
1011 PIN_SLP(gpa0-6, INPUT, DOWN);
1012 PIN_SLP(gpa0-7, INPUT, UP);
1014 PIN_SLP(gpa1-0, INPUT, DOWN);
1015 PIN_SLP(gpa1-1, INPUT, DOWN);
1016 PIN_SLP(gpa1-2, INPUT, DOWN);
1017 PIN_SLP(gpa1-3, INPUT, DOWN);
1018 PIN_SLP(gpa1-4, INPUT, DOWN);
1019 PIN_SLP(gpa1-5, INPUT, DOWN);
1021 PIN_SLP(gpb-0, INPUT, NONE);
1022 PIN_SLP(gpb-1, INPUT, NONE);
1023 PIN_SLP(gpb-2, INPUT, NONE);
1024 PIN_SLP(gpb-3, INPUT, NONE);
1025 PIN_SLP(gpb-4, INPUT, DOWN);
1026 PIN_SLP(gpb-5, INPUT, UP);
1027 PIN_SLP(gpb-6, INPUT, DOWN);
1028 PIN_SLP(gpb-7, INPUT, DOWN);
1030 PIN_SLP(gpc0-0, INPUT, DOWN);
1031 PIN_SLP(gpc0-1, INPUT, DOWN);
1032 PIN_SLP(gpc0-2, INPUT, DOWN);
1033 PIN_SLP(gpc0-3, INPUT, DOWN);
1034 PIN_SLP(gpc0-4, INPUT, DOWN);
1036 PIN_SLP(gpc1-0, INPUT, NONE);
1037 PIN_SLP(gpc1-1, PREV, NONE);
1038 PIN_SLP(gpc1-2, INPUT, NONE);
1039 PIN_SLP(gpc1-3, INPUT, NONE);
1040 PIN_SLP(gpc1-4, INPUT, NONE);
1042 PIN_SLP(gpd0-0, INPUT, DOWN);
1043 PIN_SLP(gpd0-1, INPUT, DOWN);
1044 PIN_SLP(gpd0-2, INPUT, NONE);
1045 PIN_SLP(gpd0-3, INPUT, NONE);
1047 PIN_SLP(gpd1-0, INPUT, DOWN);
1048 PIN_SLP(gpd1-1, INPUT, DOWN);
1049 PIN_SLP(gpd1-2, INPUT, NONE);
1050 PIN_SLP(gpd1-3, INPUT, NONE);
1052 PIN_SLP(gpf0-0, INPUT, NONE);
1053 PIN_SLP(gpf0-1, INPUT, NONE);
1054 PIN_SLP(gpf0-2, INPUT, DOWN);
1055 PIN_SLP(gpf0-3, INPUT, DOWN);
1056 PIN_SLP(gpf0-4, INPUT, NONE);
1057 PIN_SLP(gpf0-5, INPUT, DOWN);
1058 PIN_SLP(gpf0-6, INPUT, NONE);
1059 PIN_SLP(gpf0-7, INPUT, DOWN);
1061 PIN_SLP(gpf1-0, INPUT, DOWN);
1062 PIN_SLP(gpf1-1, INPUT, DOWN);
1063 PIN_SLP(gpf1-2, INPUT, DOWN);
1064 PIN_SLP(gpf1-3, INPUT, DOWN);
1065 PIN_SLP(gpf1-4, INPUT, NONE);
1066 PIN_SLP(gpf1-5, INPUT, NONE);
1067 PIN_SLP(gpf1-6, INPUT, DOWN);
1068 PIN_SLP(gpf1-7, PREV, NONE);
1070 PIN_SLP(gpf2-0, PREV, NONE);
1071 PIN_SLP(gpf2-1, INPUT, DOWN);
1072 PIN_SLP(gpf2-2, INPUT, DOWN);
1073 PIN_SLP(gpf2-3, INPUT, DOWN);
1074 PIN_SLP(gpf2-4, INPUT, DOWN);
1075 PIN_SLP(gpf2-5, INPUT, DOWN);
1076 PIN_SLP(gpf2-6, INPUT, NONE);
1077 PIN_SLP(gpf2-7, INPUT, NONE);
1079 PIN_SLP(gpf3-0, INPUT, NONE);
1080 PIN_SLP(gpf3-1, PREV, NONE);
1081 PIN_SLP(gpf3-2, PREV, NONE);
1082 PIN_SLP(gpf3-3, PREV, NONE);
1083 PIN_SLP(gpf3-4, OUT1, NONE);
1084 PIN_SLP(gpf3-5, INPUT, DOWN);
1086 PIN_SLP(gpj0-0, PREV, NONE);
1087 PIN_SLP(gpj0-1, PREV, NONE);
1088 PIN_SLP(gpj0-2, PREV, NONE);
1089 PIN_SLP(gpj0-3, INPUT, DOWN);
1090 PIN_SLP(gpj0-4, PREV, NONE);
1091 PIN_SLP(gpj0-5, PREV, NONE);
1092 PIN_SLP(gpj0-6, INPUT, DOWN);
1093 PIN_SLP(gpj0-7, INPUT, DOWN);
1095 PIN_SLP(gpj1-0, INPUT, DOWN);
1096 PIN_SLP(gpj1-1, PREV, NONE);
1097 PIN_SLP(gpj1-2, PREV, NONE);
1098 PIN_SLP(gpj1-3, INPUT, DOWN);
1099 PIN_SLP(gpj1-4, INPUT, DOWN);
1104 pinctrl-names = "default";
1105 pinctrl-0 = <&sleep1>;
1107 gpio_keys: gpio-keys {
1108 samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
1109 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1112 max77686_irq: max77686-irq {
1113 samsung,pins = "gpx0-7";
1114 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1117 max77693_irq: max77693-irq {
1118 samsung,pins = "gpx1-5";
1119 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1122 max77693_fuel_irq: max77693-fuel-irq {
1123 samsung,pins = "gpx2-3";
1124 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1127 sdhci2_cd: sdhci2-cd-irq {
1128 samsung,pins = "gpx3-4";
1129 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
1132 hdmi_hpd: hdmi-hpd {
1133 samsung,pins = "gpx3-7";
1134 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
1137 sleep1: sleep-states {
1138 PIN_SLP(gpk0-0, PREV, NONE);
1139 PIN_SLP(gpk0-1, PREV, NONE);
1140 PIN_SLP(gpk0-2, OUT0, NONE);
1141 PIN_SLP(gpk0-3, PREV, NONE);
1142 PIN_SLP(gpk0-4, PREV, NONE);
1143 PIN_SLP(gpk0-5, PREV, NONE);
1144 PIN_SLP(gpk0-6, PREV, NONE);
1146 PIN_SLP(gpk1-0, INPUT, DOWN);
1147 PIN_SLP(gpk1-1, INPUT, DOWN);
1148 PIN_SLP(gpk1-2, INPUT, DOWN);
1149 PIN_SLP(gpk1-3, PREV, NONE);
1150 PIN_SLP(gpk1-4, PREV, NONE);
1151 PIN_SLP(gpk1-5, PREV, NONE);
1152 PIN_SLP(gpk1-6, PREV, NONE);
1154 PIN_SLP(gpk2-0, INPUT, DOWN);
1155 PIN_SLP(gpk2-1, INPUT, DOWN);
1156 PIN_SLP(gpk2-2, INPUT, DOWN);
1157 PIN_SLP(gpk2-3, INPUT, DOWN);
1158 PIN_SLP(gpk2-4, INPUT, DOWN);
1159 PIN_SLP(gpk2-5, INPUT, DOWN);
1160 PIN_SLP(gpk2-6, INPUT, DOWN);
1162 PIN_SLP(gpk3-0, OUT0, NONE);
1163 PIN_SLP(gpk3-1, INPUT, NONE);
1164 PIN_SLP(gpk3-2, INPUT, DOWN);
1165 PIN_SLP(gpk3-3, INPUT, NONE);
1166 PIN_SLP(gpk3-4, INPUT, NONE);
1167 PIN_SLP(gpk3-5, INPUT, NONE);
1168 PIN_SLP(gpk3-6, INPUT, NONE);
1170 PIN_SLP(gpl0-0, INPUT, DOWN);
1171 PIN_SLP(gpl0-1, INPUT, DOWN);
1172 PIN_SLP(gpl0-2, INPUT, DOWN);
1173 PIN_SLP(gpl0-3, INPUT, DOWN);
1174 PIN_SLP(gpl0-4, PREV, NONE);
1175 PIN_SLP(gpl0-6, PREV, NONE);
1177 PIN_SLP(gpl1-0, INPUT, DOWN);
1178 PIN_SLP(gpl1-1, INPUT, DOWN);
1179 PIN_SLP(gpl2-0, INPUT, DOWN);
1180 PIN_SLP(gpl2-1, INPUT, DOWN);
1181 PIN_SLP(gpl2-2, INPUT, DOWN);
1182 PIN_SLP(gpl2-3, INPUT, DOWN);
1183 PIN_SLP(gpl2-4, INPUT, DOWN);
1184 PIN_SLP(gpl2-5, INPUT, DOWN);
1185 PIN_SLP(gpl2-6, PREV, NONE);
1186 PIN_SLP(gpl2-7, INPUT, DOWN);
1188 PIN_SLP(gpm0-0, INPUT, DOWN);
1189 PIN_SLP(gpm0-1, INPUT, DOWN);
1190 PIN_SLP(gpm0-2, INPUT, DOWN);
1191 PIN_SLP(gpm0-3, INPUT, DOWN);
1192 PIN_SLP(gpm0-4, INPUT, DOWN);
1193 PIN_SLP(gpm0-5, INPUT, DOWN);
1194 PIN_SLP(gpm0-6, INPUT, DOWN);
1195 PIN_SLP(gpm0-7, INPUT, DOWN);
1197 PIN_SLP(gpm1-0, INPUT, DOWN);
1198 PIN_SLP(gpm1-1, INPUT, DOWN);
1199 PIN_SLP(gpm1-2, INPUT, NONE);
1200 PIN_SLP(gpm1-3, INPUT, NONE);
1201 PIN_SLP(gpm1-4, INPUT, NONE);
1202 PIN_SLP(gpm1-5, INPUT, NONE);
1203 PIN_SLP(gpm1-6, INPUT, DOWN);
1205 PIN_SLP(gpm2-0, INPUT, NONE);
1206 PIN_SLP(gpm2-1, INPUT, NONE);
1207 PIN_SLP(gpm2-2, INPUT, DOWN);
1208 PIN_SLP(gpm2-3, INPUT, DOWN);
1209 PIN_SLP(gpm2-4, INPUT, DOWN);
1211 PIN_SLP(gpm3-0, PREV, NONE);
1212 PIN_SLP(gpm3-1, PREV, NONE);
1213 PIN_SLP(gpm3-2, PREV, NONE);
1214 PIN_SLP(gpm3-3, OUT1, NONE);
1215 PIN_SLP(gpm3-4, INPUT, DOWN);
1216 PIN_SLP(gpm3-5, INPUT, DOWN);
1217 PIN_SLP(gpm3-6, INPUT, DOWN);
1218 PIN_SLP(gpm3-7, INPUT, DOWN);
1220 PIN_SLP(gpm4-0, INPUT, DOWN);
1221 PIN_SLP(gpm4-1, INPUT, DOWN);
1222 PIN_SLP(gpm4-2, INPUT, DOWN);
1223 PIN_SLP(gpm4-3, INPUT, DOWN);
1224 PIN_SLP(gpm4-4, INPUT, DOWN);
1225 PIN_SLP(gpm4-5, INPUT, DOWN);
1226 PIN_SLP(gpm4-6, INPUT, DOWN);
1227 PIN_SLP(gpm4-7, INPUT, DOWN);
1229 PIN_SLP(gpy0-0, INPUT, DOWN);
1230 PIN_SLP(gpy0-1, INPUT, DOWN);
1231 PIN_SLP(gpy0-2, INPUT, DOWN);
1232 PIN_SLP(gpy0-3, INPUT, DOWN);
1233 PIN_SLP(gpy0-4, INPUT, DOWN);
1234 PIN_SLP(gpy0-5, INPUT, DOWN);
1236 PIN_SLP(gpy1-0, INPUT, DOWN);
1237 PIN_SLP(gpy1-1, INPUT, DOWN);
1238 PIN_SLP(gpy1-2, INPUT, DOWN);
1239 PIN_SLP(gpy1-3, INPUT, DOWN);
1241 PIN_SLP(gpy2-0, PREV, NONE);
1242 PIN_SLP(gpy2-1, INPUT, DOWN);
1243 PIN_SLP(gpy2-2, INPUT, NONE);
1244 PIN_SLP(gpy2-3, INPUT, NONE);
1245 PIN_SLP(gpy2-4, INPUT, NONE);
1246 PIN_SLP(gpy2-5, INPUT, NONE);
1248 PIN_SLP(gpy3-0, INPUT, DOWN);
1249 PIN_SLP(gpy3-1, INPUT, DOWN);
1250 PIN_SLP(gpy3-2, INPUT, DOWN);
1251 PIN_SLP(gpy3-3, INPUT, DOWN);
1252 PIN_SLP(gpy3-4, INPUT, DOWN);
1253 PIN_SLP(gpy3-5, INPUT, DOWN);
1254 PIN_SLP(gpy3-6, INPUT, DOWN);
1255 PIN_SLP(gpy3-7, INPUT, DOWN);
1257 PIN_SLP(gpy4-0, INPUT, DOWN);
1258 PIN_SLP(gpy4-1, INPUT, DOWN);
1259 PIN_SLP(gpy4-2, INPUT, DOWN);
1260 PIN_SLP(gpy4-3, INPUT, DOWN);
1261 PIN_SLP(gpy4-4, INPUT, DOWN);
1262 PIN_SLP(gpy4-5, INPUT, DOWN);
1263 PIN_SLP(gpy4-6, INPUT, DOWN);
1264 PIN_SLP(gpy4-7, INPUT, DOWN);
1266 PIN_SLP(gpy5-0, INPUT, DOWN);
1267 PIN_SLP(gpy5-1, INPUT, DOWN);
1268 PIN_SLP(gpy5-2, INPUT, DOWN);
1269 PIN_SLP(gpy5-3, INPUT, DOWN);
1270 PIN_SLP(gpy5-4, INPUT, DOWN);
1271 PIN_SLP(gpy5-5, INPUT, DOWN);
1272 PIN_SLP(gpy5-6, INPUT, DOWN);
1273 PIN_SLP(gpy5-7, INPUT, DOWN);
1275 PIN_SLP(gpy6-0, INPUT, DOWN);
1276 PIN_SLP(gpy6-1, INPUT, DOWN);
1277 PIN_SLP(gpy6-2, INPUT, DOWN);
1278 PIN_SLP(gpy6-3, INPUT, DOWN);
1279 PIN_SLP(gpy6-4, INPUT, DOWN);
1280 PIN_SLP(gpy6-5, INPUT, DOWN);
1281 PIN_SLP(gpy6-6, INPUT, DOWN);
1282 PIN_SLP(gpy6-7, INPUT, DOWN);
1287 pinctrl-names = "default";
1288 pinctrl-0 = <&sleep2>;
1290 sleep2: sleep-states {
1291 PIN_SLP(gpz-0, INPUT, DOWN);
1292 PIN_SLP(gpz-1, INPUT, DOWN);
1293 PIN_SLP(gpz-2, INPUT, DOWN);
1294 PIN_SLP(gpz-3, INPUT, DOWN);
1295 PIN_SLP(gpz-4, INPUT, DOWN);
1296 PIN_SLP(gpz-5, INPUT, DOWN);
1297 PIN_SLP(gpz-6, INPUT, DOWN);
1302 pinctrl-names = "default";
1303 pinctrl-0 = <&sleep3>;
1305 sleep3: sleep-states {
1306 PIN_SLP(gpv0-0, INPUT, DOWN);
1307 PIN_SLP(gpv0-1, INPUT, DOWN);
1308 PIN_SLP(gpv0-2, INPUT, DOWN);
1309 PIN_SLP(gpv0-3, INPUT, DOWN);
1310 PIN_SLP(gpv0-4, INPUT, DOWN);
1311 PIN_SLP(gpv0-5, INPUT, DOWN);
1312 PIN_SLP(gpv0-6, INPUT, DOWN);
1313 PIN_SLP(gpv0-7, INPUT, DOWN);
1315 PIN_SLP(gpv1-0, INPUT, DOWN);
1316 PIN_SLP(gpv1-1, INPUT, DOWN);
1317 PIN_SLP(gpv1-2, INPUT, DOWN);
1318 PIN_SLP(gpv1-3, INPUT, DOWN);
1319 PIN_SLP(gpv1-4, INPUT, DOWN);
1320 PIN_SLP(gpv1-5, INPUT, DOWN);
1321 PIN_SLP(gpv1-6, INPUT, DOWN);
1322 PIN_SLP(gpv1-7, INPUT, DOWN);
1324 PIN_SLP(gpv2-0, INPUT, DOWN);
1325 PIN_SLP(gpv2-1, INPUT, DOWN);
1326 PIN_SLP(gpv2-2, INPUT, DOWN);
1327 PIN_SLP(gpv2-3, INPUT, DOWN);
1328 PIN_SLP(gpv2-4, INPUT, DOWN);
1329 PIN_SLP(gpv2-5, INPUT, DOWN);
1330 PIN_SLP(gpv2-6, INPUT, DOWN);
1331 PIN_SLP(gpv2-7, INPUT, DOWN);
1333 PIN_SLP(gpv3-0, INPUT, DOWN);
1334 PIN_SLP(gpv3-1, INPUT, DOWN);
1335 PIN_SLP(gpv3-2, INPUT, DOWN);
1336 PIN_SLP(gpv3-3, INPUT, DOWN);
1337 PIN_SLP(gpv3-4, INPUT, DOWN);
1338 PIN_SLP(gpv3-5, INPUT, DOWN);
1339 PIN_SLP(gpv3-6, INPUT, DOWN);
1340 PIN_SLP(gpv3-7, INPUT, DOWN);
1342 PIN_SLP(gpv4-0, INPUT, DOWN);
1347 pinctrl-0 = <&pwm0_out>;
1348 pinctrl-names = "default";
1349 samsung,pwm-outputs = <0>;
1356 clock-names = "rtc", "rtc_src";
1360 bus-width = <4>;
1361 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
1362 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
1363 pinctrl-names = "default";
1364 vmmc-supply = <&ldo21_reg>;
1369 #address-cells = <1>;
1370 #size-cells = <0>;
1371 non-removable;
1372 bus-width = <4>;
1374 mmc-pwrseq = <&wlan_pwrseq>;
1375 pinctrl-names = "default";
1376 pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
1381 compatible = "brcm,bcm4329-fmac";
1382 interrupt-parent = <&gpx2>;
1384 interrupt-names = "host-wake";
1405 pinctrl-names = "default";
1406 pinctrl-0 = <&spi1_bus>;
1407 cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
1412 spi-max-frequency = <50000000>;
1414 controller-data {
1415 samsung,spi-feedback-delay = <2>;
1421 vtmu-supply = <&ldo10_reg>;