Lines Matching +full:touchscreen +full:- +full:y +full:- +full:mm
1 // SPDX-License-Identifier: GPL-2.0
12 /dts-v1/;
14 #include <dt-bindings/gpio/gpio.h>
30 stdout-path = "serial2:115200n8";
33 vemmc_reg: regulator-0 {
34 compatible = "regulator-fixed";
35 regulator-name = "VMEM_VDD_2.8V";
36 regulator-min-microvolt = <2800000>;
37 regulator-max-microvolt = <2800000>;
39 enable-active-high;
42 tsp_reg: regulator-1 {
43 compatible = "regulator-fixed";
44 regulator-name = "TSP_FIXED_VOLTAGES";
45 regulator-min-microvolt = <2800000>;
46 regulator-max-microvolt = <2800000>;
48 enable-active-high;
51 cam_af_28v_reg: regulator-2 {
52 compatible = "regulator-fixed";
53 regulator-name = "8M_AF_2.8V_EN";
54 regulator-min-microvolt = <2800000>;
55 regulator-max-microvolt = <2800000>;
57 enable-active-high;
60 cam_io_en_reg: regulator-3 {
61 compatible = "regulator-fixed";
62 regulator-name = "CAM_IO_EN";
63 regulator-min-microvolt = <2800000>;
64 regulator-max-microvolt = <2800000>;
66 enable-active-high;
69 cam_io_12v_reg: regulator-4 {
70 compatible = "regulator-fixed";
71 regulator-name = "8M_1.2V_EN";
72 regulator-min-microvolt = <1200000>;
73 regulator-max-microvolt = <1200000>;
75 enable-active-high;
78 vt_core_15v_reg: regulator-5 {
79 compatible = "regulator-fixed";
80 regulator-name = "VT_CORE_1.5V";
81 regulator-min-microvolt = <1500000>;
82 regulator-max-microvolt = <1500000>;
84 enable-active-high;
87 gpio-keys {
88 compatible = "gpio-keys";
90 vol-down-key {
94 debounce-interval = <10>;
97 vol-up-key {
101 debounce-interval = <10>;
104 power-key {
108 debounce-interval = <10>;
109 wakeup-source;
112 ok-key {
116 debounce-interval = <10>;
120 wlan_pwrseq: sdhci3-pwrseq {
121 compatible = "mmc-pwrseq-simple";
122 reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
125 fixed-rate-clocks {
127 compatible = "samsung,clock-xxti";
128 clock-frequency = <0>;
132 compatible = "samsung,clock-xusbxti";
133 clock-frequency = <24000000>;
136 pmic_ap_clk: pmic-ap-clk {
138 compatible = "fixed-clock";
139 #clock-cells = <0>;
140 clock-frequency = <32768>;
146 pinctrl-names = "default";
147 pinctrl-0 = <>;
152 cpu0-supply = <&varm_breg>;
156 cooling-maps {
159 cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
163 cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
169 vddcore-supply = <&vusb_reg>;
170 vddio-supply = <&vmipi_reg>;
171 samsung,burst-clock-frequency = <500000000>;
172 samsung,esc-clock-frequency = <20000000>;
173 samsung,pll-clock-frequency = <24000000>;
179 vdd3-supply = <&vcclcd_reg>;
180 vci-supply = <&vlcd_reg>;
181 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
182 power-on-delay= <50>;
183 reset-delay = <100>;
184 init-delay = <100>;
185 flip-horizontal;
186 flip-vertical;
187 panel-width-mm = <58>;
188 panel-height-mm = <103>;
190 display-timings {
191 timing-0 {
192 clock-frequency = <57153600>;
195 hfront-porch = <5>;
196 hback-porch = <5>;
197 hsync-len = <5>;
198 vfront-porch = <13>;
199 vback-porch = <1>;
200 vsync-len = <2>;
208 vbus-supply = <&safe1_sreg>;
213 assigned-clocks = <&clock CLK_MOUT_FIMC0>,
215 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
216 assigned-clock-rates = <0>, <160000000>;
221 assigned-clocks = <&clock CLK_MOUT_FIMC1>,
223 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
224 assigned-clock-rates = <0>, <160000000>;
229 assigned-clocks = <&clock CLK_MOUT_FIMC2>,
231 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
232 assigned-clock-rates = <0>, <160000000>;
237 assigned-clocks = <&clock CLK_MOUT_FIMC3>,
239 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
240 assigned-clock-rates = <0>, <160000000>;
252 vusb_d-supply = <&vusb_reg>;
253 vusb_a-supply = <&vusbdac_reg>;
259 samsung,i2c-sda-delay = <100>;
260 samsung,i2c-slave-addr = <0x10>;
261 samsung,i2c-max-bus-freq = <400000>;
262 pinctrl-0 = <&i2c3_bus>;
263 pinctrl-names = "default";
266 mms114-touchscreen@48 {
269 interrupt-parent = <&gpx0>;
271 touchscreen-size-x = <720>;
272 touchscreen-size-y = <1280>;
273 avdd-supply = <&tsp_reg>;
274 vdd-supply = <&tsp_reg>;
279 samsung,i2c-sda-delay = <100>;
280 samsung,i2c-slave-addr = <0x10>;
281 samsung,i2c-max-bus-freq = <100000>;
282 pinctrl-0 = <&i2c5_bus>;
283 pinctrl-names = "default";
287 compatible = "maxim,max8997-pmic";
290 interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
293 max8997,pmic-buck1-uses-gpio-dvs;
294 max8997,pmic-buck2-uses-gpio-dvs;
295 max8997,pmic-buck5-uses-gpio-dvs;
297 max8997,pmic-ignore-gpiodvs-side-effect;
298 max8997,pmic-buck125-default-dvs-idx = <0>;
300 max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
304 max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
309 max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
314 max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
321 regulator-name = "VALIVE_1.1V_C210";
322 regulator-min-microvolt = <1100000>;
323 regulator-max-microvolt = <1100000>;
324 regulator-always-on;
328 regulator-name = "VUSB_1.1V_C210";
329 regulator-min-microvolt = <1100000>;
330 regulator-max-microvolt = <1100000>;
334 regulator-name = "VMIPI_1.8V";
335 regulator-min-microvolt = <1800000>;
336 regulator-max-microvolt = <1800000>;
340 regulator-name = "VCC_1.8V_PDA";
341 regulator-min-microvolt = <1800000>;
342 regulator-max-microvolt = <1800000>;
343 regulator-always-on;
347 regulator-name = "CAM_ISP_1.8V";
348 regulator-min-microvolt = <1800000>;
349 regulator-max-microvolt = <1800000>;
353 regulator-name = "VUSB+VDAC_3.3V_C210";
354 regulator-min-microvolt = <3300000>;
355 regulator-max-microvolt = <3300000>;
359 regulator-name = "VCC_2.8V_PDA";
360 regulator-min-microvolt = <2800000>;
361 regulator-max-microvolt = <2800000>;
362 regulator-always-on;
366 regulator-name = "VPLL_1.1V_C210";
367 regulator-min-microvolt = <1100000>;
368 regulator-max-microvolt = <1100000>;
369 regulator-always-on;
373 regulator-name = "VT_CAM_1.8V";
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <1800000>;
379 regulator-name = "VCC_3.3V_LCD";
380 regulator-min-microvolt = <3300000>;
381 regulator-max-microvolt = <3300000>;
385 regulator-name = "VLCD_2.2V";
386 regulator-min-microvolt = <2200000>;
387 regulator-max-microvolt = <2200000>;
391 regulator-name = "CAM_SENSOR_IO_1.8V";
392 regulator-min-microvolt = <1800000>;
393 regulator-max-microvolt = <1800000>;
397 regulator-name = "VTF_2.8V";
398 regulator-min-microvolt = <2800000>;
399 regulator-max-microvolt = <2800000>;
403 regulator-name = "VDDQ_M1M2_1.2V";
404 regulator-min-microvolt = <1200000>;
405 regulator-max-microvolt = <1200000>;
406 regulator-always-on;
410 regulator-name = "VARM_1.2V_C210";
411 regulator-min-microvolt = <900000>;
412 regulator-max-microvolt = <1350000>;
413 regulator-always-on;
417 regulator-name = "VINT_1.1V_C210";
418 regulator-min-microvolt = <900000>;
419 regulator-max-microvolt = <1100000>;
420 regulator-always-on;
424 regulator-name = "CAM_ISP_CORE_1.2V";
425 regulator-min-microvolt = <1200000>;
426 regulator-max-microvolt = <1200000>;
430 regulator-name = "VMEM_1.2V_C210";
431 regulator-min-microvolt = <1200000>;
432 regulator-max-microvolt = <1200000>;
433 regulator-always-on;
437 regulator-name = "VCC_SUB_2.0V";
438 regulator-min-microvolt = <2000000>;
439 regulator-max-microvolt = <2000000>;
440 regulator-always-on;
444 regulator-name = "SAFEOUT1";
448 regulator-name = "SAFEOUT2";
449 regulator-boot-on;
453 regulator-name = "EN32KHZ_AP";
454 regulator-always-on;
458 regulator-name = "EN32KHZ_CP";
459 regulator-always-on;
468 clock-names = "rtc", "rtc_src";
472 bus-width = <8>;
473 non-removable;
474 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
475 pinctrl-names = "default";
476 vmmc-supply = <&vemmc_reg>;
481 bus-width = <4>;
482 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
483 pinctrl-names = "default";
484 vmmc-supply = <&tflash_reg>;
485 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
492 #address-cells = <1>;
493 #size-cells = <0>;
495 non-removable;
496 bus-width = <4>;
497 mmc-pwrseq = <&wlan_pwrseq>;
498 vmmc-supply = <&tflash_reg>;
500 pinctrl-names = "default";
501 pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
504 compatible = "brcm,bcm4330-fmac";
507 interrupt-parent = <&gpx2>;
509 interrupt-names = "host-wake";