Lines Matching +full:regulator +full:- +full:microvolt +full:- +full:offset
1 // SPDX-License-Identifier: GPL-2.0
3 * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
11 /dts-v1/;
13 #include "exynos4412-ppmu-common.dtsi"
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/linux-event-codes.h>
19 model = "Samsung Galaxy S2 (GT-I9100)";
28 stdout-path = "serial2:115200n8";
31 vemmc_reg: regulator-0 {
32 compatible = "regulator-fixed";
33 regulator-name = "VMEM_VDD_2.8V";
34 regulator-min-microvolt = <2800000>;
35 regulator-max-microvolt = <2800000>;
37 enable-active-high;
40 tsp_reg: regulator-1 {
41 compatible = "regulator-fixed";
42 regulator-name = "TSP_FIXED_VOLTAGES";
43 regulator-min-microvolt = <3300000>;
44 regulator-max-microvolt = <3300000>;
46 startup-delay-us = <70000>;
47 enable-active-high;
48 regulator-boot-on;
49 regulator-always-on;
52 cam_af_28v_reg: regulator-2 {
53 compatible = "regulator-fixed";
54 regulator-name = "8M_AF_2.8V_EN";
55 regulator-min-microvolt = <2800000>;
56 regulator-max-microvolt = <2800000>;
58 enable-active-high;
61 cam_io_en_reg: regulator-3 {
62 compatible = "regulator-fixed";
63 regulator-name = "CAM_IO_EN";
64 regulator-min-microvolt = <2800000>;
65 regulator-max-microvolt = <2800000>;
67 enable-active-high;
70 cam_io_12v_reg: regulator-4 {
71 compatible = "regulator-fixed";
72 regulator-name = "8M_1.2V_EN";
73 regulator-min-microvolt = <1200000>;
74 regulator-max-microvolt = <1200000>;
76 enable-active-high;
79 vt_core_15v_reg: regulator-5 {
80 compatible = "regulator-fixed";
81 regulator-name = "VT_CORE_1.5V";
82 regulator-min-microvolt = <1500000>;
83 regulator-max-microvolt = <1500000>;
85 enable-active-high;
88 gpio-keys {
89 compatible = "gpio-keys";
91 vol-down {
95 debounce-interval = <10>;
98 vol-up {
102 debounce-interval = <10>;
109 debounce-interval = <10>;
110 wakeup-source;
117 debounce-interval = <10>;
121 wlan_pwrseq: sdhci3-pwrseq {
122 compatible = "mmc-pwrseq-simple";
123 reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
126 i2c_max17042_fuel: i2c-gpio-0 {
127 compatible = "i2c-gpio";
128 #address-cells = <1>;
129 #size-cells = <0>;
131 sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
132 scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
133 i2c-gpio,delay-us = <5>;
138 interrupt-parent = <&gpx2>;
141 pinctrl-0 = <&max17042_fuel_irq>;
142 pinctrl-names = "default";
145 maxim,over-heat-temp = <700>;
146 maxim,over-volt = <4500>;
150 spi-3 {
151 compatible = "spi-gpio";
152 #address-cells = <1>;
153 #size-cells = <0>;
155 num-chipselects = <1>;
156 cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
157 sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
158 mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
164 spi-max-frequency = <1200000>;
166 vdd3-supply = <&vmipi_reg>;
167 vci-supply = <&vcclcd_reg>;
169 reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
170 power-on-delay = <10>;
171 reset-delay = <10>;
173 panel-width-mm = <90>;
174 panel-height-mm = <154>;
176 display-timings {
178 clock-frequency = <23492370>;
181 hback-porch = <16>;
182 hfront-porch = <16>;
183 vback-porch = <2>;
184 vfront-porch = <28>;
185 hsync-len = <2>;
186 vsync-len = <1>;
187 hsync-active = <0>;
188 vsync-active = <0>;
189 de-active = <0>;
190 pixelclk-active = <0>;
196 remote-endpoint = <&fimd_dpi_ep>;
202 fixed-rate-clocks {
204 compatible = "samsung,clock-xxti";
205 clock-frequency = <0>;
209 compatible = "samsung,clock-xusbxti";
210 clock-frequency = <24000000>;
213 pmic_ap_clk: pmic-ap-clk {
215 compatible = "fixed-clock";
216 #clock-cells = <0>;
217 clock-frequency = <32768>;
227 cpu0-supply = <&varm_breg>;
231 cooling-maps {
234 cooling-device = <&cpu0 2 2>;
238 cooling-device = <&cpu0 4 4>;
247 phy-names = "host";
253 vbus-supply = <&safe1_sreg>;
259 assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>;
260 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
261 assigned-clock-rates = <0>, <160000000>;
267 assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
268 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
269 assigned-clock-rates = <0>, <160000000>;
275 assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>;
276 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
277 assigned-clock-rates = <0>, <160000000>;
283 assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
284 assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
285 assigned-clock-rates = <0>, <160000000>;
290 #address-cells = <1>;
291 #size-cells = <0>;
293 samsung,invert-vden;
294 samsung,invert-vclk;
296 pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
297 pinctrl-names = "default";
303 remote-endpoint = <&lcd_ep>;
311 mali-supply = <&vg3d_breg>;
318 vusb_d-supply = <&vusb_reg>;
319 vusb_a-supply = <&vusbdac_reg>;
325 samsung,i2c-sda-delay = <100>;
326 samsung,i2c-slave-addr = <0x10>;
327 samsung,i2c-max-bus-freq = <100000>;
329 pinctrl-0 = <&i2c3_bus>;
330 pinctrl-names = "default";
332 mxt224-touchscreen@4a {
336 interrupt-parent = <&gpx0>;
344 samsung,i2c-sda-delay = <100>;
345 samsung,i2c-slave-addr = <0x10>;
346 samsung,i2c-max-bus-freq = <100000>;
348 pinctrl-0 = <&i2c5_bus>;
349 pinctrl-names = "default";
352 compatible = "maxim,max8997-pmic";
355 interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>,
358 max8997,pmic-buck1-uses-gpio-dvs;
359 max8997,pmic-buck2-uses-gpio-dvs;
360 max8997,pmic-buck5-uses-gpio-dvs;
362 max8997,pmic-ignore-gpiodvs-side-effect;
363 max8997,pmic-buck125-default-dvs-idx = <0>;
365 max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
369 max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
374 max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
379 max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
384 pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
385 pinctrl-names = "default";
389 regulator-name = "VADC_3.3V_C210";
390 regulator-min-microvolt = <3300000>;
391 regulator-max-microvolt = <3300000>;
392 regulator-always-on;
396 regulator-name = "VALIVE_1.1V_C210";
397 regulator-min-microvolt = <1100000>;
398 regulator-max-microvolt = <1100000>;
399 regulator-always-on;
404 regulator-name = "VUSB_1.1V_C210";
405 regulator-min-microvolt = <1100000>;
406 regulator-max-microvolt = <1100000>;
410 regulator-name = "VMIPI_1.8V";
411 regulator-min-microvolt = <1800000>;
412 regulator-max-microvolt = <1800000>;
413 regulator-always-on;
417 regulator-name = "VHSIC_1.2V";
418 regulator-min-microvolt = <1200000>;
419 regulator-max-microvolt = <1200000>;
420 regulator-always-on;
424 regulator-name = "VCC_1.8V_PDA";
425 regulator-min-microvolt = <1800000>;
426 regulator-max-microvolt = <1800000>;
427 regulator-always-on;
431 regulator-name = "CAM_ISP_1.8V";
432 regulator-min-microvolt = <1800000>;
433 regulator-max-microvolt = <1800000>;
437 regulator-name = "VUSB+VDAC_3.3V_C210";
438 regulator-min-microvolt = <3300000>;
439 regulator-max-microvolt = <3300000>;
443 regulator-name = "VCC_2.8V_PDA";
444 regulator-min-microvolt = <2800000>;
445 regulator-max-microvolt = <2800000>;
446 regulator-always-on;
450 regulator-name = "TOUCH_2.8V";
451 regulator-min-microvolt = <2800000>;
452 regulator-max-microvolt = <2800000>;
453 regulator-always-on;
457 regulator-name = "VPLL_1.1V";
458 regulator-min-microvolt = <1100000>;
459 regulator-max-microvolt = <1100000>;
460 regulator-always-on;
464 regulator-name = "VT_CAM_1.8V";
465 regulator-min-microvolt = <1800000>;
466 regulator-max-microvolt = <1800000>;
470 regulator-name = "VCC_3.0V_LCD";
471 regulator-min-microvolt = <3000000>;
472 regulator-max-microvolt = <3000000>;
476 regulator-name = "VCC_2.8V_MOTOR";
477 regulator-min-microvolt = <2800000>;
478 regulator-max-microvolt = <2800000>;
482 regulator-name = "LED_A_2.8V";
483 regulator-min-microvolt = <2800000>;
484 regulator-max-microvolt = <2800000>;
488 regulator-name = "CAM_SENSOR_IO_1.8V";
489 regulator-min-microvolt = <1800000>;
490 regulator-max-microvolt = <1800000>;
494 regulator-name = "VTF_2.8V";
495 regulator-min-microvolt = <2800000>;
496 regulator-max-microvolt = <2800000>;
500 regulator-name = "TOUCH_LED_3.3V";
501 regulator-min-microvolt = <2500000>;
502 regulator-max-microvolt = <3300000>;
506 regulator-name = "VDDQ_M1M2_1.2V";
507 regulator-min-microvolt = <1200000>;
508 regulator-max-microvolt = <1200000>;
509 regulator-always-on;
513 regulator-name = "VARM_1.2V_C210";
514 regulator-min-microvolt = <65000>;
515 regulator-max-microvolt = <2225000>;
516 regulator-always-on;
520 regulator-name = "VINT_1.1V_C210";
521 regulator-min-microvolt = <65000>;
522 regulator-max-microvolt = <2225000>;
523 regulator-always-on;
527 regulator-name = "G3D_1.1V";
528 regulator-min-microvolt = <900000>;
529 regulator-max-microvolt = <1200000>;
530 regulator-microvolt-offset = <50000>;
531 regulator-always-on;
535 regulator-name = "CAM_ISP_CORE_1.2V";
536 regulator-min-microvolt = <1200000>;
537 regulator-max-microvolt = <1200000>;
541 regulator-name = "VMEM_1.2V";
542 regulator-min-microvolt = <1200000>;
543 regulator-max-microvolt = <1200000>;
544 regulator-always-on;
548 regulator-name = "VCC_SUB_2.0V";
549 regulator-min-microvolt = <2000000>;
550 regulator-max-microvolt = <2000000>;
551 regulator-always-on;
555 regulator-name = "SAFEOUT1";
559 regulator-name = "SAFEOUT2";
560 regulator-boot-on;
564 regulator-name = "CHARGER";
565 regulator-min-microamp = <60000>;
566 regulator-max-microamp = <2580000>;
567 regulator-always-on;
571 regulator-name = "CHARGER_CV";
572 regulator-min-microvolt = <3800000>;
573 regulator-max-microvolt = <4100000>;
574 regulator-always-on;
578 regulator-name = "EN32KHZ_AP";
579 regulator-always-on;
583 regulator-name = "EN32KHZ_CP";
584 regulator-always-on;
593 samsung,i2c-sda-delay = <100>;
594 samsung,i2c-slave-addr = <0x10>;
595 samsung,i2c-max-bus-freq = <400000>;
597 pinctrl-0 = <&i2c7_bus>;
598 pinctrl-names = "default";
601 compatible = "asahi-kasei,ak8975";
609 pinctrl-names = "default";
610 pinctrl-0 = <&sleep0>;
612 sleep0: sleep-states {
613 gpa0-0 {
614 samsung,pins = "gpa0-0";
615 samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
616 samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
619 gpa0-1 {
620 samsung,pins = "gpa0-1";
621 samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
622 samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
625 gpa0-2 {
626 samsung,pins = "gpa0-2";
627 samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
628 samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
631 gpa0-3 {
632 samsung,pins = "gpa0-3";
633 samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
634 samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
640 mhl_int: mhl-int {
641 samsung,pins = "gpf3-5";
642 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
645 i2c_mhl_bus: i2c-mhl-bus {
646 samsung,pins = "gpf0-4", "gpf0-6";
647 samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
648 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
649 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
652 usb_sel: usb-sel {
653 samsung,pins = "gpl0-6";
654 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
655 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
656 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
657 samsung,pin-val = <0>;
660 bt_en: bt-en {
661 samsung,pins = "gpl0-4";
662 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
663 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
664 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
665 samsung,pin-val = <0>;
668 bt_res: bt-res {
669 samsung,pins = "gpl1-0";
670 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
671 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
672 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
673 samsung,pin-val = <0>;
676 otg_gp: otg-gp {
677 samsung,pins = "gpx3-3";
678 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
679 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
680 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
681 samsung,pin-val = <0>;
684 mag_mhl_gpio: mag-mhl {
685 samsung,pins = "gpd0-2";
686 samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
687 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
690 max8997_irq: max8997-irq {
691 samsung,pins = "gpx0-7";
692 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
695 max17042_fuel_irq: max17042-fuel-irq {
696 samsung,pins = "gpx2-3";
697 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
700 tsp224_irq: tsp224-irq {
701 samsung,pins = "gpx0-4";
702 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
709 clock-names = "rtc", "rtc_src";
715 bus-width = <8>;
716 non-removable;
717 vmmc-supply = <&vemmc_reg>;
719 pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
720 pinctrl-names = "default";
726 bus-width = <4>;
727 cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
728 vmmc-supply = <&vtf_reg>;
730 pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
731 pinctrl-names = "default";
737 #address-cells = <1>;
738 #size-cells = <0>;
740 non-removable;
741 bus-width = <4>;
742 mmc-pwrseq = <&wlan_pwrseq>;
743 vmmc-supply = <&vtf_reg>;
745 pinctrl-names = "default";
746 pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
749 compatible = "brcm,bcm4330-fmac";
752 interrupt-parent = <&gpx2>;
754 interrupt-names = "host-wake";
761 pinctrl-names = "default";
762 pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
765 compatible = "brcm,bcm4330-bt";
767 shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
768 reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
769 device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
770 host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;