Lines Matching +full:iovdd +full:- +full:supply
1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
8 #include "dra7-evm-common.dtsi"
9 #include "dra74x-mmc-iodelay.dtsi"
13 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
20 evm_12v0: fixedregulator-evm_12v0 {
21 /* main supply */
22 compatible = "regulator-fixed";
23 regulator-name = "evm_12v0";
24 regulator-min-microvolt = <12000000>;
25 regulator-max-microvolt = <12000000>;
26 regulator-always-on;
27 regulator-boot-on;
30 evm_1v8_sw: fixedregulator-evm_1v8 {
31 compatible = "regulator-fixed";
32 regulator-name = "evm_1v8";
33 vin-supply = <&smps9_reg>;
34 regulator-min-microvolt = <1800000>;
35 regulator-max-microvolt = <1800000>;
38 reserved-memory {
39 #address-cells = <2>;
40 #size-cells = <2>;
43 ipu2_memory_region: ipu2-memory@95800000 {
44 compatible = "shared-dma-pool";
50 dsp1_memory_region: dsp1-memory@99000000 {
51 compatible = "shared-dma-pool";
57 ipu1_memory_region: ipu1-memory@9d000000 {
58 compatible = "shared-dma-pool";
64 dsp2_memory_region: dsp2-memory@9f000000 {
65 compatible = "shared-dma-pool";
72 evm_3v3_sd: fixedregulator-sd {
73 compatible = "regulator-fixed";
74 regulator-name = "evm_3v3_sd";
75 regulator-min-microvolt = <3300000>;
76 regulator-max-microvolt = <3300000>;
77 enable-active-high;
81 evm_3v3_sw: fixedregulator-evm_3v3_sw {
82 compatible = "regulator-fixed";
83 regulator-name = "evm_3v3_sw";
84 vin-supply = <&sysen1>;
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
89 aic_dvdd: fixedregulator-aic_dvdd {
91 compatible = "regulator-fixed";
92 regulator-name = "aic_dvdd";
93 vin-supply = <&evm_3v3_sw>;
94 regulator-min-microvolt = <1800000>;
95 regulator-max-microvolt = <1800000>;
98 vsys_3v3: fixedregulator-vsys3v3 {
99 /* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
100 compatible = "regulator-fixed";
101 regulator-name = "vsys_3v3";
102 regulator-min-microvolt = <3300000>;
103 regulator-max-microvolt = <3300000>;
104 vin-supply = <&evm_12v0>;
105 regulator-always-on;
106 regulator-boot-on;
109 evm_5v0: fixedregulator-evm_5v0 {
110 /* Output of Cntlr B of TPS43351-Q1 on dra7-evm */
111 compatible = "regulator-fixed";
112 regulator-name = "evm_5v0";
113 regulator-min-microvolt = <5000000>;
114 regulator-max-microvolt = <5000000>;
115 vin-supply = <&evm_12v0>;
116 regulator-always-on;
117 regulator-boot-on;
120 evm_3v6: fixedregulator-evm_3v6 {
121 compatible = "regulator-fixed";
122 regulator-name = "evm_3v6";
123 regulator-min-microvolt = <3600000>;
124 regulator-max-microvolt = <3600000>;
125 vin-supply = <&evm_5v0>;
126 regulator-always-on;
127 regulator-boot-on;
130 vmmcwl_fixed: fixedregulator-mmcwl {
131 compatible = "regulator-fixed";
132 regulator-name = "vmmcwl_fixed";
133 regulator-min-microvolt = <1800000>;
134 regulator-max-microvolt = <1800000>;
136 startup-delay-us = <70000>;
137 enable-active-high;
140 vtt_fixed: fixedregulator-vtt {
141 compatible = "regulator-fixed";
142 regulator-name = "vtt_fixed";
143 regulator-min-microvolt = <1350000>;
144 regulator-max-microvolt = <1350000>;
145 regulator-always-on;
146 regulator-boot-on;
147 enable-active-high;
148 vin-supply = <&sysen2>;
156 pinctrl-single,pins = <
163 pinctrl-single,pins = <
172 clock-frequency = <400000>;
177 ti,palmas-override-powerhold;
178 ti,system-power-controller;
181 compatible = "ti,tps659038-pmic";
186 regulator-name = "smps123";
187 regulator-min-microvolt = < 850000>;
188 regulator-max-microvolt = <1250000>;
189 regulator-always-on;
190 regulator-boot-on;
195 regulator-name = "smps45";
196 regulator-min-microvolt = < 850000>;
197 regulator-max-microvolt = <1250000>;
198 regulator-always-on;
199 regulator-boot-on;
203 /* VDD_GPU - over VDD_SMPS6 */
204 regulator-name = "smps6";
205 regulator-min-microvolt = <850000>;
206 regulator-max-microvolt = <1250000>;
207 regulator-always-on;
208 regulator-boot-on;
213 regulator-name = "smps7";
214 regulator-min-microvolt = <850000>;
215 regulator-max-microvolt = <1150000>;
216 regulator-always-on;
217 regulator-boot-on;
222 regulator-name = "smps8";
223 regulator-min-microvolt = < 850000>;
224 regulator-max-microvolt = <1250000>;
225 regulator-always-on;
226 regulator-boot-on;
231 regulator-name = "smps9";
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <1800000>;
234 regulator-always-on;
235 regulator-boot-on;
239 /* LDO1_OUT --> SDIO */
240 regulator-name = "ldo1";
241 regulator-min-microvolt = <1800000>;
242 regulator-max-microvolt = <3300000>;
243 regulator-always-on;
244 regulator-boot-on;
249 /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
250 regulator-name = "ldo2";
251 regulator-min-microvolt = <3300000>;
252 regulator-max-microvolt = <3300000>;
253 regulator-always-on;
254 regulator-boot-on;
259 regulator-name = "ldo3";
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
262 regulator-always-on;
263 regulator-boot-on;
268 regulator-name = "ldo9";
269 regulator-min-microvolt = <1050000>;
270 regulator-max-microvolt = <1050000>;
271 regulator-always-on;
272 regulator-boot-on;
273 regulator-allow-bypass;
278 regulator-name = "ldoln";
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <1800000>;
281 regulator-always-on;
282 regulator-boot-on;
287 regulator-name = "ldousb";
288 regulator-min-microvolt = <3300000>;
289 regulator-max-microvolt = <3300000>;
290 regulator-boot-on;
297 regulator-name = "regen2";
298 regulator-boot-on;
299 regulator-always-on;
306 regulator-name = "sysen1";
307 regulator-boot-on;
308 regulator-always-on;
313 regulator-name = "sysen2";
314 regulator-boot-on;
315 regulator-always-on;
324 gpio-controller;
325 #gpio-cells = <2>;
326 interrupt-parent = <&gpio6>;
328 interrupt-controller;
329 #interrupt-cells = <2>;
335 lines-initial-states = <0x1408>;
336 gpio-controller;
337 #gpio-cells = <2>;
338 interrupt-parent = <&gpio6>;
340 interrupt-controller;
341 #interrupt-cells = <2>;
345 #sound-dai-cells = <0>;
348 adc-settle-ms = <40>;
349 ai3x-micbias-vg = <1>; /* 2.0V */
353 AVDD-supply = <&evm_3v3_sw>;
354 IOVDD-supply = <&evm_3v3_sw>;
355 DRVDD-supply = <&evm_3v3_sw>;
356 DVDD-supply = <&aic_dvdd>;
362 clock-frequency = <400000>;
367 gpio-controller;
368 #gpio-cells = <2>;
371 gpio-hog;
373 output-low;
374 line-name = "vin6_sel_s0";
381 vmmc-supply = <&evm_3v3_sd>;
382 vqmmc-supply = <&ldo1_reg>;
383 bus-width = <4>;
385 * SDCD signal is not being used here - using the fact that GPIO mode
388 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
389 …pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50"…
390 pinctrl-0 = <&mmc1_pins_default>;
391 pinctrl-1 = <&mmc1_pins_hs>;
392 pinctrl-2 = <&mmc1_pins_sdr12>;
393 pinctrl-3 = <&mmc1_pins_sdr25>;
394 pinctrl-4 = <&mmc1_pins_sdr50>;
395 pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
396 pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
397 pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
398 pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
403 vmmc-supply = <&evm_1v8_sw>;
404 vqmmc-supply = <&evm_1v8_sw>;
405 bus-width = <8>;
406 non-removable;
407 pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
408 pinctrl-0 = <&mmc2_pins_default>;
409 pinctrl-1 = <&mmc2_pins_hs>;
410 pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
411 pinctrl-3 = <&mmc2_pins_ddr_rev20>;
412 pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
413 pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
418 vmmc-supply = <&evm_3v6>;
419 vqmmc-supply = <&vmmcwl_fixed>;
420 …pinctrl-names = "default-rev11", "default", "hs-rev11", "hs", "sdr12-rev11", "sdr12", "sdr25-rev11…
421 pinctrl-0 = <&mmc4_pins_default &mmc4_iodelay_ds_rev11_conf>;
422 pinctrl-1 = <&mmc4_pins_default &mmc4_iodelay_ds_rev20_conf>;
423 pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
424 pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
425 pinctrl-4 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
426 pinctrl-5 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
427 pinctrl-6 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
428 pinctrl-7 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
432 vdd-supply = <&smps123_reg>;
441 * For the existing IOdelay configuration via U-Boot we don't
442 * support NAND on dra7-evm. Keep it disabled. Enabling it
443 * requires a different configuration by U-Boot.
448 compatible = "ti,omap2-nand";
450 interrupt-parent = <&gpmc>;
453 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
454 ti,nand-xfer-type = "prefetch-dma";
455 ti,nand-ecc-opt = "bch8";
456 ti,elm-id = <&elm>;
457 nand-bus-width = <16>;
458 gpmc,device-width = <2>;
459 gpmc,sync-clk-ps = <0>;
460 gpmc,cs-on-ns = <0>;
461 gpmc,cs-rd-off-ns = <80>;
462 gpmc,cs-wr-off-ns = <80>;
463 gpmc,adv-on-ns = <0>;
464 gpmc,adv-rd-off-ns = <60>;
465 gpmc,adv-wr-off-ns = <60>;
466 gpmc,we-on-ns = <10>;
467 gpmc,we-off-ns = <50>;
468 gpmc,oe-on-ns = <4>;
469 gpmc,oe-off-ns = <40>;
470 gpmc,access-ns = <40>;
471 gpmc,wr-access-ns = <80>;
472 gpmc,rd-cycle-ns = <80>;
473 gpmc,wr-cycle-ns = <80>;
474 gpmc,bus-turnaround-ns = <0>;
475 gpmc,cycle2cycle-delay-ns = <0>;
476 gpmc,clk-activation-ns = <0>;
477 gpmc,wr-data-mux-bus-ns = <0>;
479 /* All SPL-* partitions are sized to minimal length
481 * NAND flash this is equal to size of erase-block */
482 #address-cells = <1>;
483 #size-cells = <1>;
501 label = "NAND.u-boot-spl-os";
505 label = "NAND.u-boot";
509 label = "NAND.u-boot-env";
513 label = "NAND.u-boot-env.backup1";
521 label = "NAND.file-system";
528 phy-supply = <&ldousb_reg>;
532 phy-supply = <&ldousb_reg>;
536 ti,no-reset-on-init;
537 ti,no-idle-on-init;
545 phy-handle = <ðphy0>;
546 phy-mode = "rgmii";
547 ti,dual-emac-pvid = <1>;
551 phy-handle = <ðphy1>;
552 phy-mode = "rgmii";
553 ti,dual-emac-pvid = <2>;
557 ethphy0: ethernet-phy@2 {
561 ethphy1: ethernet-phy@3 {
568 pinctrl-names = "default", "sleep", "active";
569 pinctrl-0 = <&dcan1_pins_sleep>;
570 pinctrl-1 = <&dcan1_pins_sleep>;
571 pinctrl-2 = <&dcan1_pins_default>;
576 memory-region = <&ipu2_memory_region>;
581 memory-region = <&ipu1_memory_region>;
586 memory-region = <&dsp1_memory_region>;
591 memory-region = <&dsp2_memory_region>;