Lines Matching +full:sda +full:- +full:open +full:- +full:drain
1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
11 #include <dt-bindings/dma/at91.h>
12 #include <dt-bindings/pinctrl/at91.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/clock/at91.h>
18 #address-cells = <1>;
19 #size-cells = <1>;
22 interrupt-parent = <&aic>;
42 #address-cells = <1>;
43 #size-cells = <0>;
46 compatible = "arm,arm926ej-s";
59 compatible = "fixed-clock";
60 #clock-cells = <0>;
61 clock-frequency = <0>;
65 compatible = "fixed-clock";
66 #clock-cells = <0>;
67 clock-frequency = <0>;
71 compatible = "fixed-clock";
72 #clock-cells = <0>;
73 clock-frequency = <1000000>;
78 compatible = "mmio-sram";
80 #address-cells = <1>;
81 #size-cells = <1>;
86 compatible = "simple-bus";
87 #address-cells = <1>;
88 #size-cells = <1>;
92 compatible = "simple-bus";
93 #address-cells = <1>;
94 #size-cells = <1>;
97 aic: interrupt-controller@fffff000 {
98 #interrupt-cells = <3>;
99 compatible = "atmel,at91rm9200-aic";
100 interrupt-controller;
102 atmel,external-irqs = <31>;
106 compatible = "atmel,at91sam9x5-matrix", "syscon";
110 pmecc: ecc-engine@ffffe000 {
111 compatible = "atmel,at91sam9g45-pmecc";
117 compatible = "atmel,at91sam9g45-ddramc";
120 clock-names = "ddrck";
124 compatible = "atmel,at91sam9260-smc", "syscon";
129 compatible = "atmel,at91sam9x5-pmc", "syscon";
132 #clock-cells = <2>;
134 clock-names = "slow_clk", "main_xtal";
138 compatible = "atmel,at91sam9g45-rstc";
144 compatible = "atmel,at91sam9x5-shdwc";
150 compatible = "atmel,at91sam9260-pit";
157 compatible = "atmel,at91sam9x5-sckc";
160 #clock-cells = <0>;
164 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
165 #address-cells = <1>;
166 #size-cells = <0>;
170 clock-names = "t0_clk", "slow_clk";
174 compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
175 #address-cells = <1>;
176 #size-cells = <0>;
180 clock-names = "t0_clk", "slow_clk";
183 dma0: dma-controller@ffffec00 {
184 compatible = "atmel,at91sam9g45-dma";
187 #dma-cells = <2>;
189 clock-names = "dma_clk";
192 dma1: dma-controller@ffffee00 {
193 compatible = "atmel,at91sam9g45-dma";
196 #dma-cells = <2>;
198 clock-names = "dma_clk";
202 #address-cells = <1>;
203 #size-cells = <1>;
204 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
209 pinctrl_dbgu: dbgu-0 {
217 pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
229 pinctrl_ebi_data_8_15: ebi-data-msb-0 {
241 pinctrl_ebi_addr_nand: ebi-addr-0 {
249 pinctrl_usart0: usart0-0 {
255 pinctrl_usart0_rts: usart0_rts-0 {
260 pinctrl_usart0_cts: usart0_cts-0 {
265 pinctrl_usart0_sck: usart0_sck-0 {
272 pinctrl_usart1: usart1-0 {
278 pinctrl_usart1_rts: usart1_rts-0 {
283 pinctrl_usart1_cts: usart1_cts-0 {
288 pinctrl_usart1_sck: usart1_sck-0 {
295 pinctrl_usart2: usart2-0 {
301 pinctrl_usart2_rts: usart2_rts-0 {
306 pinctrl_usart2_cts: usart2_cts-0 {
311 pinctrl_usart2_sck: usart2_sck-0 {
318 pinctrl_uart0: uart0-0 {
326 pinctrl_uart1: uart1-0 {
334 pinctrl_nand_oe_we: nand-oe-we-0 {
340 pinctrl_nand_rb: nand-rb-0 {
345 pinctrl_nand_cs: nand-cs-0 {
352 pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
359 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
368 pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 {
375 pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
384 pinctrl_ssc0_tx: ssc0_tx-0 {
391 pinctrl_ssc0_rx: ssc0_rx-0 {
400 pinctrl_spi0: spi0-0 {
409 pinctrl_spi1: spi1-0 {
418 pinctrl_i2c0: i2c0-0 {
426 pinctrl_i2c1: i2c1-0 {
434 pinctrl_i2c2: i2c2-0 {
442 pinctrl_i2c_gpio0: i2c_gpio0-0 {
450 pinctrl_i2c_gpio1: i2c_gpio1-0 {
458 pinctrl_i2c_gpio2: i2c_gpio2-0 {
466 pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
470 pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
474 pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
479 pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
483 pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
487 pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
492 pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
496 pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
501 pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
505 pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
512 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
516 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
520 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
524 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
528 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
532 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
536 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
540 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
544 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
550 pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
554 pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
558 pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
562 pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
566 pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
570 pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
574 pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
578 pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
582 pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
588 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
591 #gpio-cells = <2>;
592 gpio-controller;
593 interrupt-controller;
594 #interrupt-cells = <2>;
599 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
602 #gpio-cells = <2>;
603 gpio-controller;
604 #gpio-lines = <19>;
605 interrupt-controller;
606 #interrupt-cells = <2>;
611 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
614 #gpio-cells = <2>;
615 gpio-controller;
616 interrupt-controller;
617 #interrupt-cells = <2>;
622 compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
625 #gpio-cells = <2>;
626 gpio-controller;
627 #gpio-lines = <22>;
628 interrupt-controller;
629 #interrupt-cells = <2>;
635 compatible = "atmel,at91sam9g45-ssc";
640 dma-names = "tx", "rx";
641 pinctrl-names = "default";
642 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
644 clock-names = "pclk";
653 dma-names = "rxtx";
655 clock-names = "mci_clk";
656 #address-cells = <1>;
657 #size-cells = <0>;
666 dma-names = "rxtx";
668 clock-names = "mci_clk";
669 #address-cells = <1>;
670 #size-cells = <0>;
675 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
678 pinctrl-names = "default";
679 pinctrl-0 = <&pinctrl_dbgu>;
682 dma-names = "tx", "rx";
684 clock-names = "usart";
689 compatible = "atmel,at91sam9260-usart";
692 pinctrl-names = "default";
693 pinctrl-0 = <&pinctrl_usart0>;
696 dma-names = "tx", "rx";
698 clock-names = "usart";
703 compatible = "atmel,at91sam9260-usart";
706 pinctrl-names = "default";
707 pinctrl-0 = <&pinctrl_usart1>;
710 dma-names = "tx", "rx";
712 clock-names = "usart";
717 compatible = "atmel,at91sam9260-usart";
720 pinctrl-names = "default";
721 pinctrl-0 = <&pinctrl_usart2>;
724 dma-names = "tx", "rx";
726 clock-names = "usart";
731 compatible = "atmel,at91sam9x5-i2c";
736 dma-names = "tx", "rx";
737 #address-cells = <1>;
738 #size-cells = <0>;
739 pinctrl-names = "default";
740 pinctrl-0 = <&pinctrl_i2c0>;
746 compatible = "atmel,at91sam9x5-i2c";
751 dma-names = "tx", "rx";
752 #address-cells = <1>;
753 #size-cells = <0>;
754 pinctrl-names = "default";
755 pinctrl-0 = <&pinctrl_i2c1>;
761 compatible = "atmel,at91sam9x5-i2c";
766 dma-names = "tx", "rx";
767 #address-cells = <1>;
768 #size-cells = <0>;
769 pinctrl-names = "default";
770 pinctrl-0 = <&pinctrl_i2c2>;
776 compatible = "atmel,at91sam9260-usart";
779 pinctrl-names = "default";
780 pinctrl-0 = <&pinctrl_uart0>;
782 clock-names = "usart";
787 compatible = "atmel,at91sam9260-usart";
790 pinctrl-names = "default";
791 pinctrl-0 = <&pinctrl_uart1>;
793 clock-names = "usart";
798 #address-cells = <1>;
799 #size-cells = <0>;
800 compatible = "atmel,at91sam9x5-adc";
805 clock-names = "adc_clk", "adc_op_clk";
806 atmel,adc-use-external-triggers;
807 atmel,adc-channels-used = <0xffff>;
808 atmel,adc-vref = <3300>;
809 atmel,adc-startup-time = <40>;
810 atmel,adc-sample-hold-time = <11>;
811 atmel,adc-res = <8 10>;
812 atmel,adc-res-names = "lowres", "highres";
813 atmel,adc-use-res = "highres";
816 trigger-name = "external-rising";
817 trigger-value = <0x1>;
818 trigger-external;
822 trigger-name = "external-falling";
823 trigger-value = <0x2>;
824 trigger-external;
828 trigger-name = "external-any";
829 trigger-value = <0x3>;
830 trigger-external;
834 trigger-name = "continuous";
835 trigger-value = <0x6>;
840 #address-cells = <1>;
841 #size-cells = <0>;
842 compatible = "atmel,at91rm9200-spi";
847 dma-names = "tx", "rx";
848 pinctrl-names = "default";
849 pinctrl-0 = <&pinctrl_spi0>;
851 clock-names = "spi_clk";
856 #address-cells = <1>;
857 #size-cells = <0>;
858 compatible = "atmel,at91rm9200-spi";
863 dma-names = "tx", "rx";
864 pinctrl-names = "default";
865 pinctrl-0 = <&pinctrl_spi1>;
867 clock-names = "spi_clk";
872 compatible = "atmel,at91sam9g45-udc";
877 clock-names = "hclk", "pclk";
882 compatible = "atmel,at91sam9260-wdt";
886 atmel,watchdog-type = "hardware";
887 atmel,reset-type = "all";
888 atmel,dbg-halt;
893 compatible = "atmel,at91sam9x5-rtc";
901 compatible = "atmel,at91sam9rl-pwm";
905 #pwm-cells = <3>;
911 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
915 clock-names = "ohci_clk", "hclk", "uhpck";
920 compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
924 clock-names = "usb_clk", "ehci_clk";
929 compatible = "atmel,at91sam9x5-ebi";
930 #address-cells = <2>;
931 #size-cells = <1>;
944 nand_controller: nand-controller {
945 compatible = "atmel,at91sam9g45-nand-controller";
946 ecc-engine = <&pmecc>;
947 #address-cells = <2>;
948 #size-cells = <1>;
955 i2c-gpio-0 {
956 compatible = "i2c-gpio";
957 gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
960 i2c-gpio,sda-open-drain;
961 i2c-gpio,scl-open-drain;
962 i2c-gpio,delay-us = <2>; /* ~100 kHz */
963 #address-cells = <1>;
964 #size-cells = <0>;
965 pinctrl-names = "default";
966 pinctrl-0 = <&pinctrl_i2c_gpio0>;
970 i2c-gpio-1 {
971 compatible = "i2c-gpio";
972 gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
975 i2c-gpio,sda-open-drain;
976 i2c-gpio,scl-open-drain;
977 i2c-gpio,delay-us = <2>; /* ~100 kHz */
978 #address-cells = <1>;
979 #size-cells = <0>;
980 pinctrl-names = "default";
981 pinctrl-0 = <&pinctrl_i2c_gpio1>;
985 i2c-gpio-2 {
986 compatible = "i2c-gpio";
987 gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
990 i2c-gpio,sda-open-drain;
991 i2c-gpio,scl-open-drain;
992 i2c-gpio,delay-us = <2>; /* ~100 kHz */
993 #address-cells = <1>;
994 #size-cells = <0>;
995 pinctrl-names = "default";
996 pinctrl-0 = <&pinctrl_i2c_gpio2>;